Used Foundry & Casting in Germany

No-Bake Shake out

The Shakeout deck is manufactured from 70 mm thick mild steel with D050 mm apertures covered by 20 mm thick Hardox 400 D=40 mm Mainly consists of: Shake-out grid with steel frame Counter-vibration mass (2 pieces)...

1992 IMR C40U

• Manufacturer: IMR

Technical details: for tool dimensions within a diameter of 420mm Production capacity 350 kg / hour installed power 4 kW Hydraulics 175 l Graphite tanks total volume 650 l No agitator EXW- ex Works, as seen witho...

2003 IMR B3R-160

• Manufacturer: IMR

Melting furnace content 2300 kg Installed power 95 kVA Acting power 85 kW Nozzle heating 1.2 m³/h gas EXW- ex Works, as seen without dismantling from Germany

1999 OMS Die Casting Cell

consisting of melting furnace Striko West furnace W 65 SL, built in 1997, serial no.: 55288, die casting machine OMS, spraying robot Fanuc, incl. robot control, parts removal robot Kuka KR 15-2 built in 1999 incl...

VOGEL & SCHEMMANN MISCHKA I GF/70 "A"

• Manufacturer: Vogel

Batch max. 50-75 kg, container Ø 530 x 400 mm, capacity max. 1 t/h, drive power 2.2 kW, connected load 380 V, 50 Hz, hand lever door lock, control with emergency stop push button, tilting lid with position limit ...

1986 STEFFEENS DUO-MIX 1

• Manufacturer: STEFFEENS

Batch max. 80 l/120 kg, container Ø 600 mm, dual mixing principle: side and bottom mixing arms, capacity 2-3 t/h, drive power 4 kW, connected load 380 V, 50 Hz, pneumatic closure, safety limit switch, control wit...

WEBAC-MICHEL Kugelmischer M 60

• Manufacturer: Webac

Batch max. 60 kg, mixing time 50-70 s, capacity approx. 3 t/h, mixer cover with safety limit switch, cover lifting and swiveling device, pneumatically operated discharge flap, drive power 5.5 kW

1994 WEBAC-MICHEL Kugelmischer M 30-A-2

• Manufacturer: Webac

Batch mixer 30 kg, steel support structure, two-part sand storage hopper, sand dosing, additive hopper with discharge screw conveyor, liquid component container storage, binder dosing system, 2 discharge points, ...

1991 KLEIN STATORMIX 53

• Manufacturer: Klein

Batch mixer 50 kg/ 33 l, two-part storage hopper, sand weigher, liquid component container store, dosing station with 2 bellows dosing units, additive dosing, distribution system with overhead conveyor and bucket...

1978 VOGEL & SCHEMMANN KSM 6.10.02

• Manufacturer: Vogel

Four-column machine, shooting volume 10 l, core box max. 510 x 450 x 450 mm / ___ kg, clamping/separating device, discharge carriage with lifting device, gas flushing plate, vibrating conveyor chute, control unit

1989 RÖPER / LAEMPE LKV H 5

• Manufacturer: Laempe / Röperwerk

Single-column machine, shooting volume 5 l, horizontal/vertical core box division, manual table height adjustment, vacuum clamping device, vibrating infeed chute, safety housing, electric PLC control with two-han...

1988 LAEMPE Kernschießautomat L-5

• Manufacturer: Laempe / Röperwerk

Shooting volume 5 l, horizontal and/or vertical core box division, vacuum clamping and separating device, hydraulic unit, safety cabin, sand hopper, electric control B+R

2013 SEGAB PROMIX 2x 200

• Manufacturer: Segab

Divided daily silo (new sand/regenerate), capacity approx. 7 m³, dedusting filter, 2 sand heater sifters, sand dosing, 2 batch mixers á 200 kg, Pep Set component dosing, steel support structure, electric PLC cont...

2007 Frech DAK 580/62 Die Casting Cell

• Manufacturer: Frech

consisting of dosing furnace Westomat 65 S, 540 dm3, . 4568, Die casting machine Frech DAK 580-62, Spraying robot Fanuc m710ic, incl. robot control and touch panel, Parts removal robot Fanuc R2000ic, incl. robot ...

1993 VOGEL & SCHEMMANN KSM 6.05.00 CO2/CB/VAC/hy. Prop./SPS-99/Unterdr.

• Manufacturer: Vogel

Four-column machine, 5 l shooting volume, horizontal/vertical core box division, hydraulic table height adjustment, vacuum clamping device, vibrating infeed chute, safety enclosure, electrical PLC control with tw...