2004 Robamat 5201
- Manufacturer: Robamat
Used heater from Robamat for use on die casting machines. This single-circuit unit is designed for controlling the temperature of a die casting tool with oil. Dismantled from ongoing production. The unit was test...
Schorndorf, Germany
1995 RAUCH MOS 50/80U
- Manufacturer: Rauch
Used Rauch furnace, type MOS50/80U, including used stainless steel crucible (third-party manufacturer) and substructure. No furnace control cabinet. Heating output 24 kW at 3 x 400 V 50 Hz Suitable for DAW 50 and...
Schorndorf, Germany
2000 MELTEC ZC20/120
- Manufacturer: MELTEC
Used electric multi-chamber furnace, Meltec type ZC 20/120, including used stainless steel crucible, insulated crucible cover, base, and control cabinet. Heating output 21.5 kW Suitable for DAW 20 Cable set avail...
Schorndorf, Germany
2001 MELTEC Z 50/180 B
- Manufacturer: MELTEC
Used Meltec furnace type Z 50/180 B (gas-fired with Elco burner) including used stainless steel crucible, base, and control cabinet. Heating output 40 kW Suitable for DAW 40 and DAW 50
Schorndorf, Germany
2018 FRECH Z20/120C
- Manufacturer: Frech
New and unused machine furnace for DAW20A or DAW20S. The Metec type Z20/120C furnace features a durable stainless steel crucible. The crucible capacity is 420 kg, and the melting capacity is 120 kg/h at a connect...
Schorndorf, Germany
1998 FRECH Weightcontrol 2000
- Manufacturer: Frech
Used scale for use on die casting machines with a piece weight of up to 2000g. The device was inspected and repaired by the manufacturer. Load cell and control board replaced.
Schorndorf, Germany
2001 FRECH M200/120
- Manufacturer: Frech
Used machine furnace, Meltec type M 200/120, for use on Oskar Frech hot-chamber die-casting machines with a 200-ton capacity for processing magnesium alloys. Melting capacity per hour: 120 kg/h, 54 kW power ratin...
Schorndorf, Germany
2003 Frech Espana DAW 125 PD SBC3
- Manufacturer: Frech
Used DAW 125 die-casting machine with SBC3 control for zinc alloys. Available as a base for a general overhaul at the manufacturer's factory.
Schorndorf, Germany
1995 FRECH DAW 200S
- Manufacturer: Frech
Used DAW 200 S die-casting machine with Datavario control for zinc alloys. Available upon request. The manufacturer recommends a general overhaul at the overhaul facility. This can be carried out to the extent re...
Schorndorf, Germany
1999 FRECH DAM 315 S
- Manufacturer: Frech
Used DAM 315 S die-casting machine with Datacontrol control for magnesium alloys. Available from our used machine warehouse. The machine is equipped with a Rauch MMO 315E electric furnace. No spraying device. The...
Schorndorf, Germany
2024 FRECH W200Zn-ST
- Manufacturer: Frech
Machine Equipment 1.1.1 Motorized safety door, right in the pouring direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - Energy efficiency 2.0.1 Ejector assistance packages ...
Schorndorf, Germany
Mössner Gravity casting
- Manufacturer: Mössner - Rekord
Gravity casting systems for different processes and castings in highest performance as turnkey solution. Whether gravity chill casting or tilting chill casting with rotation of the mould by 90 ° or 180 ° – we sup...
Eschach, Germany
Mössner HPDC high pressure die casting automation
- Manufacturer: Mössner - Rekord
Turnkey systems and individual components for die casting. Our systems technology and automation solutions take over the unloading from the casting machine, testing, cooling, sawing, deburring and mould spraying ...
Eschach, Germany
Processing sand-lime brick
- Manufacturer: LISSMAC Maschinenbau GmbH
Select your country below so we can show you the correct information for your location.
Bad Wurzach, Germany
Tip: Enter manufacturer, model or keyword