Used Filter Presses

Sperry Filter Press Size C-7 #17295

• Manufacturer: Sperry Filter Press

7" x 7" 316 stainless steel filter press by sperry filter press, size c 7, serial # x43253. Features 6-1" thick frames and 7-1. 250" thick plates with 3/8" top and bottom female npt ports, rated for 100 psi servi...

Polypropylene Filter Press Plates Only - IPP# 108390

(16) chambers, 1.72 cubic meter cake capacity 2-eye top side feed, Red and blue buttons (washing plates).34.5

Polypropylene Schule Filter Press - IPP# 207197

• Manufacturer: Schule

(2) end plates recess 700mm x 700mm x 7mm deep, 70mm center feed, 50mm 4-corner discharge, hydraulic press mechanism

J-PRESS 800G32-16-8DYLW

• Manufacturer: J-PRESS

Used J-Press 8 Cu. Ft. Plate and Frame Filter Press Model: 800G32-16-8DYLW

Polypropylene Schenk Membrane Filter Press - IPP# 204563

• Manufacturer: Schenck

Membrane filter press, hydraulic driven by Siemens 500 V 50 Hz 4,2 A 1410 rpm EEx e II.

Ss Clad Filter Press 13" X 13" #15026

• Manufacturer: Ss Clad Filter Press

13" x 13" filter press (mfg. Unknown) included two end plates, one screened plate and one frame, on steel base with casters, manal screw closure and cast iron fram, contact parts are stainless steel on bronze som...

Polypropylene 40/60 Filter Press - IPP# 219883

Seitz Enzinger plate and frame filter press with (4) eye. Manual Screw closure

Polypropylene 40/60 Filter Press - IPP# 219882

Seitz Enzinger plate and frame filter press (2) end plates (4) eye. Manual Screw closure.

Polypropylene Edward & Jones Filter Press - IPP# 706517

• Manufacturer: Jones

recessed/membrane Polypropylene plate filter press (13) recessed plates, recess is 430mm x 430mm x 15mm deep, (12) non recessed membrane plates (these have attachment for air discharge) manual hydraulic press mec...

Polypropylene Seitz 40/60 Filter Press - IPP# 219855

• Manufacturer: Seitz

Seitz Enzinger plate and frame filter press .(4) eye. Manual Screw closure

Polypropylene Edwards and Jones Filter Press - IPP# 705837

• Manufacturer: Jones

twin screw plate closure wtih control panel, driven by 7.5 kw, 3/50/415 volt, 1450 rpm motor, 80mm center feed, (4) 50mm corner discharge, 1 side of press with Sick light curtain,

Polypropylene Edwards and Jones Filter Press - IPP# 706047

• Manufacturer: Jones

plates manufactured by JVK, type 7876, (4) 75mm corner openings, 100mm centre top feed 17- plates with taps, single screw hydraulic closure, plate shifters,

Plastic Johnson Progress Ltd Filter Press - IPP# 706413

• Manufacturer: Johnson

(32) Klico 11-89 polypropylene filter plates with 700mm x 700mm x 15mm deep recess 75mm center feed with 15mm side plate discharge, 50mm thick plates, hydraulic plate press mechanism with built on open/close switch

Filter Press, Skeleton Only, Manufactured by Sperry - IPP# 208855

• Manufacturer: Sperry

Skeleton Only. Has round side rails.