Used Filter Presses

48" Perrin Filter Press, 1,081 Sq Ft, 41 Cu Ft, Polypropylene

• Manufacturer: Perrin

48" Perrin Filter Press, 1,081 Sq Ft, 41 Cu Ft, Polypropylene Used 48" Perrin Filter Press, polypropylene recessed plate design, (46) plates, (45) chambers, 0.75" cake thickness 50 cu. ft. cake capacity, 1035 sq....

47.24" (1,200 MM) Edwards & Jones Filter Press, 38.46 Cu Ft, Polypropylene

• Manufacturer: Jones

47.24" (1,200 MM) Edwards & Jones Filter Press, 38.46 Cu Ft, Polypropylene Used 1,200 mm (47.24") Edwards & Jones Filter Press, polypropylene construction with (31) recessed plates, 38.46 cu. ft. cake capacity, 4...

47.24" (1,200 MM) Hoesch Filter Press, 1,141 Sq Ft, 35.59 Cu Ft, Polypropylene

• Manufacturer: Hoesch

47.24" (1,200 MM) Hoesch Filter Press, 1,141 Sq Ft, 35.59 Cu Ft, Polypropylene Used 1,200 mm (47.24") Hoesch Filter Press, polypropylene recessed plate design, (47) plates, (48) chambers, 20MM recess, 106 sq. met...

47.24" (1,200 MM) Eimco Shriver Filter Press, 662 Sq Ft, 27.5 Cu Ft, Polypropylene

• Manufacturer: Eimco

47.24" (1,200 MM) Eimco Shriver Filter Press, 662 Sq Ft, 27.5 Cu Ft, Polypropylene Used 1,200 mm (47.24") Eimco Shriver filter press with (24) 48" polypropylene recessed plates, 4 eye, approximately 662.4 sq ft s...

57" (1,450 MM) Durco Filter Presses, 360 Cu Ft, Polypropylene

• Manufacturer: Durco

57" (1,450 MM) Durco Filter Presses, 360 Cu Ft, Polypropylene Two (2) used 1450 MM (57") Durco Filter Presses, Model QPF-1450/76-98, polypropylene, plate and frame, 2928 sq. ft. effective filter area, 360 cu. ft....

Used JWI Filter press 10.5 cu ft. Polypropylene plate and frame press

• Manufacturer: JWI

Used JWI Filter press 10.5 cu ft. Polypropylene plate and frame press. Unit has (21) 800 mm gasketed polypropylene plates, with center feed and (4) corner return. 1-3-1 button sequence for air blow down. Automati...

Stainless Steel Laboratory Filter Press with Pump - 7.25" (184mm)

• Manufacturer: Mori TEM

Stainless steel frame assembly with drip pan Filter Area: approx. 7.3 sq. ft. total (0.365 sq. ft. per filter) Filter Type: Paper Number of filters: 20 Filter Plate Material: nylon Manual handwheel closure Includ...

Seitz Enzinger Noll Polishing Filter Press - Type 40/100

• Manufacturer: Seitz

Used Seitz Enzinger Noll Polishing Filter Press - Type 40/100 Stainless frame and plates Total of 73 plates, 0.50 in thick (alternating 37 reinforced/ 36 open, see photos) 14.75 in x 14.75 in Total filter area of...

JWI Inc. 470mm J-Press Filter Press - 88 sq. ft. Model 470G32-25-4MYLW

• Manufacturer: JWI Inc.

Includes (26) 470mm gasketed polypropylene plates with filter cloth Center feed (1 1/2"Ø), 4 corner return (1"Ø) Manual hydraulics, 7,000PSI clamp pressure Approx. 4 cu/ft total volume (cake capacity) Welded mild...

12" Bright Technologies Dewatering Wastewater Belt Filter Press Model J1200

• Manufacturer: Bright Technologies

Serial # B99120025. Ideal for dewatering biosolids and industrial wastewater slurries. Stainless steel tubular frame (21"W X 74"L) Pneumatic tensioning, sludge end wiper, bottom drip pan with side discharge. 3/4H...

M.W. Watermark Recessed Chamber Plate & Frame Filter Press - 800mm

• Manufacturer: M. W. Watermark

Air over hydraulics operation with 2-gauge & 2-switch controls Air blowdown, semi-automatic plate shifter Quantity of 40 gasketed polypropylene, recessed chamber filter plates with gaskets Capacity: 20 Cubic Foot...

2008 Evoqua / Siemens 1500mm / 65 Plate Filter Press || One Still Available

• Manufacturer: Siemens

Unit is USED. Unit shows some signs of wear since it was in production before being removed. Unit has been removed from location in the pictures. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. We have not tested t...

JWI J-Press, 3 Cubic Foot - 11 Plate Gasketed Hydraulic Filter Press - 630mm Plates

• Manufacturer: JWI

Equipment type: J-Press | Max feed pressure: 100PSI | Air specs: 100PSI is recommended | Hyd. clamping pressure: 4500PSI | Relief pressure: 4900PSI | Size and number of plates: 654mm - 11 Plates | Type of plates...

Filter Press Hydraulic Cylinders

This used hydraulic cylinder is a small unit designed specifically for filter press applications. The overall length of the cylinder is 35 inches, making it suitable for compact installations. It features a shaft...