New Edge Polishers

FP PIN 1.7 X 5.2mm

• Manufacturer: Giant Finishing

50 lb. bag of Porcelain media is great for polishing (in conjunction with one of our burnishing compounds) with some deburr/ edge break capabilities. Normally used in the final step of a finishing process.

FP Sphere 8mm

• Manufacturer: TBT

50 lb. bag of Porcelain media is great for polishing (in conjunction with one of our burnishing compounds) with some deburr/ edge break capabilities. Normally used in the final step of a finishing process.

FP Sphere 3mm

• Manufacturer: Giant Finishing

50 lb. bag of Porcelain media is great for polishing (in conjunction with one of our burnishing compounds) with some deburr/ edge break capabilities. Normally used in the final step of a finishing process.

FP PIN 3mm X 10mm

• Manufacturer: Giant Finishing

50 lb. bag of Porcelain media is great for polishing (in conjunction with one of our burnishing compounds) with some deburr/ edge break capabilities. Normally used in the final step of a finishing process.

BRUSHING MACHINE VOL180 FOOTWEAR EDGE POLISHING BRUSH WITH ELECTRONIC SPEED VARIATOR AND BUILT-IN SUCTION

Width: 770mm; | Depth: 500mm; | Height: 1300mm; | Weight: 72Kg; | Speed: 400-2400rmps; | Engine: 0.75Hp; | Aspirator: 0.3Hp; | Air flow rate: 360m/h; | Power: 1Hp; | Noise: 70dB(A).

CMG Macchine Kombitaurus

• Manufacturer: CMG Macchine

The Kombitaurus is fully automated and performing edge polishing machine that allows you to work the flat edge and the profiling edge in a production line and at the same time. It uses a rotation beam to create a...

CMG Macchine Dynamic

• Manufacturer: CMG Macchine

The new automatic edge-polisher Dynamic is designed to achieve high production and excellent polishing quality. A robust machine that allows different types of automatic simultaneous processing such as calibratio...

CMG Macchine Flotter 520 / 540 / 540 PLUS

• Manufacturer: CMG Macchine

The edge-polisher Flotter 520 is suitable for polishing and profiling the edges on composite stones. A small machine that is simple to use and maintain. The electronic equipment sets the partial polishing, the on...

CMG Macchine Taurus 565R

• Manufacturer: Taurus

Behind the Taurus 565 edge polishing machine there is an advanced technological study that ranges from the realization of different projects, from a simple staircase step to a kitchen countertop. Technical featur...

CMG Macchine V-Groove

• Manufacturer: CMG Macchine

The V-Groove edge polishing machine makes double miter-cuts (45°) in a single pass, this way the two parts perfectly glued together in 90°. The miter-cutting is performed with the polishing side of the working pi...

CMG Macchine Taurus

• Manufacturer: Taurus

The Taurus edge polishing machine is composed of the best materials on the market: 22 mm steel bench, covered with rectified stainless steel plates; all the machine parts which are in contact with water are in st...