1994 John Deere combine #M0650
- Manufacturer: John Deere
- Hours: 2,368 hour
- Cutting width: 6 meter
Air conditioning, radio, loss indicator, chopper, hydraulic drive, reversing device
Bremen, Germany
1996 Deutz combine #M0905
- Manufacturer: Deutz
- Hours: 3,407 hour
- Cutting width: 4.2 meter
mach. Drive, slope compensation, chopper Operating hours: 3407 | Engine performance: 125 kW | Cutting tool width: 4,20 m | Set of tyres - back: 10.5-18 | Set of tyres - front: 23.1-26 | Shaker count: 5 | Comments...
Bremen, Germany
2008 Fendt combine #M0722
- Manufacturer: Fendt
- Hours: 1,628 hour
- Cutting width: 6.5 meter
Climate, on-board computer, all-wheel drive, slope compensation, loss measurement, throughput control, reel horizontal adjustment, reversing device, pendulum compensation, cutterbar guidance automatic, hydr. driv...
Bremen, Germany
2006 Claas combine #M0751
- Manufacturer: Claas
- Cutting width: 7.5 meter
All-wheel drive, chopper, loss measurement, yield measurement, pendulum compensation, chaff spreader, throughput control, reel horizontal adjustment, reversing device, on-board computer
Bremen, Germany
2015 Massey Ferguson combine #M0903
- Manufacturer: Massey Ferguson
- Hours: 1,504 hour
- Cutting width: 9.5 meter
Air conditioning, reversing device, automatic height adjustment, AdBlue, stone trap, chaff spreader, chopper
Bremen, Germany
1986 John Deere combine #M0900
- Manufacturer: John Deere
- Hours: 3,465 hour
- Cutting width: 3.65 meter
Air conditioning, mech. drive, servo, reversing device, chopper
Bremen, Germany
1984 New Holland combine #M648
- Manufacturer: New Holland
- Cutting width: 4.2 meter
Chipper, Engine performance: 134 kW | Cutting tool width: 4,20 m | Set of tyres - back: 23.1-30 | Set of tyres - front: 12.5-18 | Comments: Häcksler,
Bremen, Germany
1993 Massey Ferguson combine #M0413
- Manufacturer: Massey Ferguson
- Hours: 2,597 hour
- Cutting width: 5.5 meter
cab, air conditioning, chopper, power-flow, reversing device, throughput control, reel horizontal adjustment
Bremen, Germany
2006 John Deere combine #M0390
- Manufacturer: John Deere
- Hours: 811 hour
- Cutting width: 6.1 meter
Slope compensation, yield measurement/GPS, on-board computer, climate, pendulum compensation, chaff spreader, loss measurement, chaff cutter, reverser, throughput control, reel horizontal adjustment A short video...
Bremen, Germany
1997 Deutz Fahr combine #M0750
- Manufacturer: Deutz
- Hours: 1,934 hour
- Cutting width: 5.4 meter
Climate, hydr. drive Operating hours: 1934 | Engine performance: 176 kW | Cutting tool width: 5,40 m | Set of tyres - back: 14.9/80-24 | Set of tyres - front: 650/75R32 | Shaker count: 6 | Comments: Klima, hydr. ...
Bremen, Germany
1996 Deutz Fahr combine #M0699
- Manufacturer: Deutz
- Hours: 3,471 hour
- Cutting width: 6.1 meter
Chopper, extr. grain tank, pendulum compensation, hydr. drive, air conditioning
Bremen, Germany
1998 Deutz Fahr combine harvester #M0874
- Manufacturer: Deutz
- Hours: 2,000 hour
Operating hours: 2000 | Engine performance: 228 kW | Cutting tool width: 6,70m m | Set of tyres - back: 405/70R20 | Set of tyres - front: 800/65R32 | Shaker count: 6 | Comments: Hydr. Antrieb
Bremen, Germany
2011 John Deere combine #M0909
- Manufacturer: John Deere
- Hours: 2,890 hour
Operating hours: 2890 | Engine performance: 260 kW | Set of tyres - back: 540/65R30 | Set of tyres - front: 800/65R32 | Comments: Allrad, Klima, Spreuverteiler, Reversereinrichtung, autom. Höhenanpassung, Rückfa...
Bremen, Germany
1995 John Deere combine #M0635
- Manufacturer: John Deere
- Hours: 2,220 hour
- Cutting width: 6 meter
Air conditioning, loss indicator, on-board computer, chopper, throughput control, horizontal reel adjustment, hydraulic drive, reversing device
Bremen, Germany
1994 Deutz Fahr combine harvester #M0901
- Manufacturer: Deutz
- Hours: 5,936 hour
- Cutting width: 6.1 meter
hydraulic drive, air conditioning, heating, chopper, rapeseed equipment possible at extra cost
Bremen, Germany
Tip: Enter manufacturer, model or keyword