Used Boring, Dowel Inserting, Gluing in Community of Madrid, Spain

GLUEING MACHINE

BERLE TMB-3001

• Manufacturer: Berle

SERIAL NO. 0511041 3 KW TOTAL POWER TWO MANUALLY MOVABLE GROUPS WITH STOPS TO SECURE THE POSITIONING AND A MAXIMUM OPENING OF 220MM OF USEFUL WORK. EACH GROUP INCORPORATES AN AUTOMATIC HINGE FEED MAGAZINE THAT FE...

BERLE. TMB 3001.

• Manufacturer: Berle
• Model: TMB 3001

EMBISAGRATOR. N° 2609022. -MAXIMUM DISTANCE BETWEEN HINGES 170 MM. 4 LOWER HEADS, THREE-PHASE STAR-DELTA MOTOR 220-380V /50 HZ /;1.5KW. EACH HEAD HAS FOR 4 BITS, DISTANCE BETWEEN THE 2 ENDS 50 MM; DISTANCE BETWEE...

TECNOVAR MV05MAS20

• Manufacturer: TECNOVAR

Belt transfer with moldings, loader and motor Tecnovar drill 0.5 HP 3000x150mm belt

BIESSE TECHNO LOGIC

• Manufacturer: Biesse
• Model: Techno

BIESSE AUTOMATIC DRILLING MACHINE WITH RT 483 ELECTRONIC CONTROL SYSTEM FOR THE CONTROL OF THE X-POSITIONING OF THE HORIZONTAL UNITS, DRILLING HEADS AND PRESSER UNITS AS WELL AS THE Y-POSITIONING OF THE FRONT UNI...

DISC TRANSFER

• Manufacturer: SCM.

COMBINED 2 OPERATIONS BRUSH/DRILL. MOTOR TABLE LENGTH 2600 MM. INFEED TABLE LENGTH 1430 MM. SPINDLE WITH 4 BLADES, TILTING GUIDE WITH AVERAGES 1100 MM X 180 MM. MANUAL RAISING AND LOWERING.

LOWER MACHINE BORE

• Manufacturer: MAQUINAL

1 BOTTOM BIT WITH A TAMPER

2003 HOLZ-HER SPRINTER 1310

• Manufacturer: Holz-Her

*GLUING GROUP * END TRIMMING GROUP *UPPER PROFILING GROUP *LOWER PROFILING GROUP * SCRAPER GROUP *PULICANTO

BIESSE INSIDER KT2

• Manufacturer: Biesse
• Model: Insider

GROUP 1 HORIZONTAL DOWEL WITH 3 DRILL BITS, TOP TO BOTTOM OFFSET GROUP 2 HORIZONTAL DOWEL WITH 3 DRILL BITS, TOP TO BOTTOM OFFSET

BIESSE INSIDER KT2

• Manufacturer: Biesse
• Model: Insider

GROUP 1 HORIZONTAL DOWEL WITH 3 DRILL BITS, TOP TO BOTTOM OFFSET. GROUP 2 HORIZONTAL DOWEL WITH 3 DRILL BITS, TOP TO BOTTOM OFFSET.

IMARA HINGE AND FILLER

• Manufacturer: IMA

1-HEAD HINGE DRILL 4 DRILLS 2850 RPM PNEUMATIC FOOT PEDAL DRIVE OF THE SHAFT