Used Bar Peeling Machines

Trusted Seller
1989 200mm dia East European 200 MM
- Manufacturer: East European
Available for immediate inspection and delivery Still installed and under power for inspection
Rockville Centre, NY
Trusted Seller
1960 3" Medart Blaw Knox #3 RFPD
- Manufacturer: Blaw-Knox
Additional information: Equipped with a 75hp 240VDC motor drive to the Peeler Head Down slope table – Rotating shaft with (6) rotating receiving discs, transferring to receiving feed rolls (6) Receiving feed roll...
Rockville Centre, NY
Trusted Seller
300mm max dia KZTS (Kieserling type),
- Manufacturer: Kieserling
Feeding Clamp Force - 76 tons Max Stroke of Tool Holder - 50mm
Rockville Centre, NY
Trusted Seller
1991 VIDEX VC-20-MH
- Manufacturer: Videx
Equipped With Wire diameter range: .200" - .500" (5.2-13mm) | Cutoff length range: .375" - 12' | Speed, max: 300 Feet Per Minute | Max cutoff: 12' Rack | Floor space: 21-1/2' x 3' | Weigh, approx.: 6,000 lbs.
Vaughan, Canada
Trusted Seller
HYODONG HNF
- Manufacturer: HYODONG
Equipped With EXAMPLES OF TECHNOLOGY OPTIONS: 1) Built-in Robot tool change system A built-in tool change system for quick die change with better compact design. The die block and punch block can be replaced only...
Vaughan, Canada
Trusted Seller
1999 RMG 16
- Manufacturer: RMG
- Model: 16
Equipped With * Tooling for 10ga, 9ga and 6ga Maximum wire diameter: .375" | Minimum wire diameter: .062" | Feed speeds (variable): Up to 400 FPM | Maximum cut-off length: 12 Ft. | Minimum cut-off length: 3" | Le...
Vaughan, Canada
Trusted Seller
SHUSTER 1AV
- Manufacturer: Shuster
Equipped With * wire payoff Location: Maximum wire diameter: 1/4" | Minimum wire diameter: 1/16" | Feed speeds (variable): Up to 200 FPM | Maximum cut-off length: 42" | Working height centerline: 36" | Motor: 5 H...
Vaughan, Canada
Trusted Seller
SASPI MPA-100
- Manufacturer: SASPI
Equipped With Features: * Vibratory Bowl Feeder Maximum blank diameter: 10 millimeters | Minimum blank diameter: 3 millimeters | Minimum shank length: 10 millimeters | Maximum shank length: 100 millimeters | Max ...
Vaughan, Canada
Trusted Seller
1960 LEWIS 8C
- Manufacturer: Lewis
- Model: 8C
Equipped With Maximum wire diameter: 3/8" | Minimum wire diameter: 5/32" | Max. cutoff length: 16' | Feed speed: UP TO 235 FPM | Electrics: 220V/3/60 | Weight (approx): 4800 Lbs.
Vaughan, Canada
Trusted Seller
National 3 DIE BOLTMAKER
- Manufacturer: National
Equipped With Note: Threading portion incomplete - setup as progressive | Maximum wire diameter: 3/8" | Maximum length underhead: 3/4" | Max. shank length: 3.66" | Cut-off range: 1" to 4.75" | Speed: 85 PPM | Mai...
North America
Trusted Seller
SHUSTER 3AV
- Manufacturer: Shuster
Equipped With * Variable speed drive Wire diameter capacity: 1/4" - 1/2" | Maximum cutoff length: 41" | Feed speed -variable: 76 - 228 fpm | Height to center line of wire: 36" | Longest constant cut length: 30" |...
North America
Trusted Seller
ECONOMY 4600
- Manufacturer: Economy
Equipped With * 23" Vib feeder bowl Maximum bolt diameter: 3/4" | Minimum bolt diameter: 1/4" | Maximum shank length: 6" | Minimum shank length: 3/4" | Spindle speed: 800 - 2400 RPM | Production: 9- 90 PPM | Spin...
North America
Trusted Seller
SHUSTER 2AVB
- Manufacturer: Shuster
Equipped With Cutting dia capacity: .157" to .375" | Max length of cut: 12' | Speeds approx: 28-300 F.P.M. | Weight approx: 5,000 lbs | Overall dimensions approx: 83" L-R x 38" F-B x 62" H
North America
1970 MALMEDIE QPB 161
- Manufacturer: Malmedie
Dies: 4 | Max. ø (mm): 26 | Max. shaft length (mm): 165 | Max. pieces per minute: 70
ist noch bei boesner (riesige machiene)
Trusted Seller
LANDGRAF BAR PEELER T100
- Manufacturer: LANDGRAF
BAR PEELING MACHINE manufactured by LANDGRAF Model T100 Working range : Diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/...
Madrid, Spain