Used Agitators, Blenders, Mixers in Germany

5000 liter heat-/coolable agitator tank, Aisi 316 with 2 agitators

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): half-coil remarks: Heating coil outside around the lower cylinder area; 3 of the feet are equipped with load cells (no guarante...

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank

850 liter insulated agitator tank, Aisi 304 with propeller agitator

notice: some residues of previous content, bump at the insulation jacket remarks: Tank on frame rest made of Fe; Fastening of the manhole cover incomplete agitator features: Agitator motor with signs of corrosion...

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

14000 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm...

3500 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, bump at the insulation jacket remarks: Smaller dents on feet and outlet; ...

2000 Liter agitator tank, Aisi 304 with propeller agitator

• Manufacturer: SCHNEIDER AG

Volume: 2.000 liter | Upper bottom: agitator traverse with hinged cover | Stand type: bracket | Diameter inside: 1.230 mm | Cylindrical height: 1.650 mm | Total height: 3.100 mm | Technical equipment: outlet tap...

8000 liter stainless steel 316 agitator tank with cross-beam agitator

remarks: Feet were cut off during disassembly and are enclosed loose; several former connections were welded shut by the previous operator agitator features: 1 stirring blade of the crossbeam stirrer no longer pr...

500 liter agitator tank, Aisi 304 with disc agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

technical equipment: level indicator (without guarantee), butterfly valve EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

2500 liter agitator tank, Aisi 304 with propeller agitator

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

4500 liter insulated agitator tank, Aisi 316 with blades agitator

• Manufacturer: Apparate- und Behältertechnik Harrislee

remarks: Foot ends cut off; Screws in agitator flange cut off; Manhole cover fixing screw missing (see photos) agitator features: According to the previous owner, the agitator is defective and needs to be repaired.

10000 liter agitator tank with inclined blade agitator, Aisi 304

agitator features: Agitator arranged eccentrically on a welded crossbar

1300 liter pharmacy agitator tank, Aisi 316 with dissolver agitator

• Manufacturer: H&K Behälter- und Edelstahltechnik

agitator features: There is also 1 propeller on the agitator shaft (see photos)

1300 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket around half of the cylinder height; 4 support brackets, Aisi 304 (parts of the brackets were ...

Agitator tank 0.9 cbm, insulated, double jacket

• Manufacturer: Sielmann

Content: 0,9 cbm | Material: stainless steel | Material specification: 1.4401/1.4404 | I. diameter: 1100 mm | Diameter: 1274 mm | Cyl. height: 750 mm | Height agitator: 900 mm | Upper floor: 233 mm | Lower floor...