Used Agitators, Blenders, Mixers in Germany

Agitator tank 1.6 cbm, insulated

• Manufacturer: Sielmann

Design: Cylindrical suspended on a support ring with a domed upper end and a conical lower end. Propeller agitator mounted from the top center, 1.2/2.2 kW, 467/947 rpm. Double jacket around the cylinder and lower...

Agitator tank 1.2 cbm, insulated

• Manufacturer: Sielmann

Design: cylindrical, suspended on support ring with curved bottoms. Jet mixer from top center, 0.26/3.7 kW, 28/975 rpm. Double jacket around cylinder and lower bottom, designed for 3 bar operating pressure. Insul...

600 liter agitator tank with propeller agitator, Aisi 304

Volume: 600 liter | Lower bottom: torispherical bottom | Upper bottom: open | Stand type: legs | Quantity legs: 4 Piece | Diameter outside: 900 mm | Cylindrical height: 920 mm | Total height: 1.800 mm | Outlet: ...

180 liter agitator tank, Aisi 304 with propeller agitator

Volume: 180 liter | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 640 mm | Total height: 1.950 mm | Manhole: handhole | Outlet: DN40 DIN 11851 | Notice: some residues of previous content | Remarks...

6500 liter agitator tank, Aisi 304 with 2 propeller agitators

max. allowable working temperature: 90 °C remarks: Cone height approx. 1300 mm; Manhole approx. 415 x 500 mm; 1 rectangular opening approx. 350 x 440 mm without cover in the upper bottom; in 1 tank 1 small crack ...

180 liter agitator tank, Aisi 304 with propeller agitator

Volume: 180 liter | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 640 mm | Total height: 1.880 mm | Manhole: handhole | Technical equipment: butterfly valve | Outlet: DN40 DIN 11851 | Notice: some...

3500 liter agitator tank, Aisi 304 with propeller agitator

remarks: 1 stronger dent in the transition from cylinder to upper bottom; small dents in the cylinder; Foot reinforcements, Fe; Outlet extension bent

5000 liter agitator tank, Aisi 304 with propeller agitator

• Manufacturer: Behälter KG Bremen

Volume: 5.000 liter | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 1.540 mm | Cylindrical height: 2.500 mm | Total height: 4.600 mm | Manhole: in the upper bottom (Ø 500) | Technical equipment: c...

700 liter agitator tank, Aisi 304 with propeller agitator

remarks: Outlet fitting lower than the foot ends (take this into account when setting up); 1 screwed lid segment at the top edge (the rest is open); see photos

Dissolving agitator container LEHMANN - approx. 100 kg usable capacity.

• Manufacturer: Lehmann

2210 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Rieger

max. allowable working temperature: 90 °C remarks: 4 support brackets, Aisi 304; Manhole diameter approx. 420 mm; Insulation around the cylinder only; The previous operator had the two tanks in a stainless steel ...

5000 liter insulated agitator tank, Aisi 316 with 3 agitators

remarks: 1 dent in the inner tank (overpressure of the no longer functional heating jacket; see photos); insulation jacket with smaller dents and partially detached plates; tank with adhesions inside; Devices for...

Agitator tank 0.4 cbm, double jacket

• Manufacturer: Sielmann

Design: cylindrical, standing on three feet, with a flat upper lid that can be fully opened, with a counterweight, with a lower, inwardly curved base, with a gradient to the outlet. Agitator with 2 inclined blade...

500 liter pharmacy agitator tank, Aisi 316 with blades agitator

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions) agitator features: Attention: Stirrer shaft (1.4301) and baffle (1.4541), Ais...

Agitator tank 6.6 cbm, double jacket

• Manufacturer: Sielmann

Operating data: Designed for -0.5/+5 bar operating pressure Design: Cylinder, standing on 4 feet with dished ends. Inclined blade agitator from the top centered - without motor. Double jacket around the cylinder ...