Used Agitators, Blenders, Mixers in Germany

Stainless steel container 100 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on a flat base, inside with a lower conical base and an upper conical base. Propeller agitator installed diagonally in the cylinder below. 5.0 kW, 960 rpm. Insulation around the cyli...

Stainless steel container 240 cbm

• Manufacturer: Sielmann

Design: Upright cylinder with inwardly curved lower base, sloped to the outlet. With a conical upper base. Propeller agitator installed at an angle in the cylinder below, 2.7 kW, 465/970 rpm. Insulation around th...

Stainless steel container 36.9 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with conical bases, anchor agitator eccentric from above, 5.5 kW, 30 rpm, screws removed for transport, half-pipe coil around cylinder and lower base, 3...

Stainless steel container 18 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 5 feet, with conical bottoms, inclined blade agitator from above, eccentric, 3/5 kW, 22/44 rpm. Connections: 1 manhole Ø 450 in the upper base, 2 spray heads, 1 sight glass DN 125...

Stainless steel container 0.03 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator disc, 0.25 kW, 1390 rpm, outlet Ø 15 bottom center

Stainless steel container 0.1 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator propeller, 0.18/0.25 kW, 650/1390 rpm, 2 outlets DN 25

Stainless steel container 0.24 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator propeller, 0.18/0.23 kW, 650/1390 rpm, outlet 3 outlets DN 25

Stainless steel container, 8 cbm

• Manufacturer: Sielmann

Operating data: 0.4 bar operating pressure, 100 °C operating temperature according to nameplate. Design: cylindrical, standing on 4 feet, height adjustable, with conical bottoms, inclined blade agitator eccentric...

Stainless steel container 30 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with conical bottoms, propeller agitator installed diagonally below the cylinder - motor defective - Connections: 1 hinged lid dome Ø 430 in the upper b...

2003 80,000 liter KZE tank, storage/ wine/ fruit juice tank, with agitator mixer on the side, round, upright made of V2A, year of construction: 2003 22-5082L 22-5082L

• Manufacturer: Boku

Cat. no.: 22-5082L Condition: Used Units: 2 80.000 liter KZE tank, storage tank, wine tank, fruit juice tank, EKS With agitator mixer on the side Round, upright made of V2A Year of construction: 2003 Used - in ve...

2008 Color mixer Biaxo 101872

• Manufacturer: Farbmischer

Control: Emergency off/on/frequency control Mixed operation

Stainless steel container 8 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, screwable, with conical bottoms, inclined blade agitator from above, eccentric, 2.2 kW, 89 rpm, double jacket for pressureless heating/cooling, insulation around cylinder ...

Mixing tank 4.8 cbm

• Manufacturer: Sielmann

Execution: cylindrical, vertical on 3 feet, with bracing and cone bottoms, propeller mixer from above eccentrically 1.5 kW, 460 rpm. Insulation around cylinder and bottom tank, lid VA fully welded. Connections: 1...

30,000 liter 1 bar agitator tank/storage tank with two vertical agitators made of V2A 24-0183 24-0183

Cat. no.: 24-0183 Condition: Used Units: 1 MJ UNI-WOLF 015-000 Top cover: Cylinder: Underbody:

Stainless steel container 1.5 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, with a flat upper lid that can be opened 1/3 and a curved lower base. Double jacket around the cylinder, designed for a working pressure of 1.5 bar, 77 L. Disk agitator ec...