- Trusted Seller
SIMEC LEVI P
- Manufacturer: Simec
Material entry: from right to left | Number of calibrators: 1 | Number of polishing mandrels: 5 | Max working width: 600 mm | Equipped with: translating bridge
Domegliara, Italy - Trusted Seller
2002 CMG TAURUS 100
- Manufacturer: CMG
Material entry: left | Number of polishing mandrels: 8 | Number of polishing spindles: 8 | Number of bevelers: 4
Domegliara, Italy 
CMG Macchine V-Groove
- Manufacturer: CMG Macchine
The V-Groove edge polishing machine makes double miter-cuts (45°) in a single pass, this way the two parts perfectly glued together in 90°. The miter-cutting is performed with the polishing side of the working pi...
Villafranca di Verona, Italy
CMG Macchine Taurus
- Manufacturer: Taurus
The Taurus edge polishing machine is composed of the best materials on the market: 22 mm steel bench, covered with rectified stainless steel plates; all the machine parts which are in contact with water are in st...
Villafranca di Verona, Italy- Trusted Seller
Unknown MNP
- Manufacturer: ZED Macchine Srl
Base: in cast iron | Basis: in cast iron | Column: in tempered steel | Spindle lifting cylinder stroke: 150 mm | Maximum radius: 2,000 mm | Lift stroke: 300 mm | Lifting stroke: 300 mm | Abrasive plate: diam. 27...
Domegliara, Italy 
CMG Macchine Kombitaurus
- Manufacturer: CMG Macchine
The Kombitaurus is fully automated and performing edge polishing machine that allows you to work the flat edge and the profiling edge in a production line and at the same time. It uses a rotation beam to create a...
Villafranca di Verona, Italy
CMG Macchine Dynamic
- Manufacturer: CMG Macchine
The new automatic edge-polisher Dynamic is designed to achieve high production and excellent polishing quality. A robust machine that allows different types of automatic simultaneous processing such as calibratio...
Villafranca di Verona, Italy
CMG Macchine Flotter 520 / 540 / 540 PLUS
- Manufacturer: CMG Macchine
The edge-polisher Flotter 520 is suitable for polishing and profiling the edges on composite stones. A small machine that is simple to use and maintain. The electronic equipment sets the partial polishing, the on...
Villafranca di Verona, Italy
CMG Macchine Taurus 565R
- Manufacturer: Taurus
Behind the Taurus 565 edge polishing machine there is an advanced technological study that ranges from the realization of different projects, from a simple staircase step to a kitchen countertop. Technical featur...
Villafranca di Verona, Italy- Trusted Seller
1997 COMANDULLI TP+NEW SYSTEM+AS6+DP
- Manufacturer: Comandulli
side polishing machines funerary - over 10 cm thikness structure Useful work dimension 3000x3000mm, straight edges 20-300mm, profiled edges 20-120mm, translation speed 0-30mt/min, nr 3 upper+3 lower bevelling too...
- Trusted Seller
1992 CMPI TSG 60 U
- Manufacturer: CMPI
side polishing machines - profile with 1 or more heads structure Usef. Work.width 2500mm, work.thickn. 60mm- max, belt speed 0-3500mm/min, N° 7 polish.spindles, N°1 dripper , N° 2+1 bevelling spindles, N° 3 slab...
- Trusted Seller
MONDIALMAC LUCA 88 SUPER
- Manufacturer: MONDIALMAC
side polishing machines - profile with 1 or more heads structure Useful work: length 3400/3700mm, thickness 120/140mm. Longitudinal speed 0-130 m/min, automatic change gear. Adjustable positioning piece.water 6 ...
- Trusted Seller
2005 COMANDULLI ALMA 7+4 DX
- Manufacturer: Comandulli
side polishing machines - profile with 1 or more heads structure steel Edge Polishing machine (straight &bullnose) nr 7 side pol.spindles,nr 1 gener.calibrator, nr 1 upper + nr 1 lower bevelling spindles 45°, n...
- Trusted Seller
2004 CMPI TSG 60 CN
- Manufacturer: CMPI
- Model: TSG 60 CN
side polishing machines - profile with 1 or more heads structure Usef. Work.width 2000mm, work.thickn. 60mm-80mm, belt speed 0-3500mm/min, N° 6 polish.spindles, N°1 dripper , N° 1+1 bevelling spindles, N° 3 slab...
- Trusted Seller
CMPI TSG 60 U
- Manufacturer: CMPI
side polishing machines - profile with 1 or more heads structure Usef. Work.width 2500mm, work.thickn. 60mm- max, belt speed 0-3500mm/min, N° 7 polish.spindles, N°1 dripper , N° 2+1 bevelling spindles, N° 3 slab...
Tip: Enter manufacturer, model or keyword