Used Sheet Metal Processing in Ohio, USA

36" CENTRAL MACHINERY METAL BRAKE

• used

36" CENTRAL MACHINERY METAL BRAKE

BTM Tog-L-Loc #0102423

• used

• Manufacturer: BTM

Piranha Ironworker

• used

• Manufacturer: Piranha
• Model: P-70

Name: Ironworker | Arrival date: 09-04-2025 | Dimensions l x w x h (inches): 82 x 51 x 65 | Capacity: 70 TON | Weight (lb.): 4025 | Available quantity: 1

2008 CAUFFIEL Heavy Duty 4-High Backed Up Plate Leveler

• used

• Manufacturer: Cauffiel

CAUFFIEL Heavy Duty 4-High Backed Up Plate Leveler 62.5" x 4" Cauffiel, 1/4" - 4" Plate Thickness, 84" W Roll Face, (7) 11.75" Dia. Straightening Rolls (4 Over 3), Top and Bottom 11.5" Backup Rolls, One Set of Pi...

3 x 12 GAUGE LOOPCO DEDIMPLER

• used

• Manufacturer: Loopco

Powered Length Adjustment 1 H.P. x 1720 RPM Spindle Motors (2) Machine is Mounted on Heavy Duty Casters Heavy Duty O.D. Roller Design with Spring Tension 575 Volts

1996 PALMER M50 SAND MIXER

• used

• Manufacturer: Palmer

Palmer M50 Sand Mixer with Hopper & Pumps (2), 50 Lb Per Minute

18" x .125" ROWE SERVO FEEDER Z21012D

• used

• Manufacturer: Rowe

18" MAX WIDTH .010" - .125" THICKNESS CAPACITY 0 - 999.99 FEED LENGHTS RIGHT TO LEFT FEED BER-PP15 CONTROLLER ADJUSTABLE HEIGHT BASE CASCADE ROLLS PILOT RELEASE 460V

20ga PEXTO CIRCLE SHEAR & BEADER 10053C

• used

• Manufacturer: Pexto
• Model: 299

MODEL: 299 SERIAL #: 1090 20 GAUGE CAPACITY 3.25"-42.5" DIAMETER CAPACITY MANUAL NON-POWERED NEW COT $5200.00 GOOD CONDITION 20 GAUGE CAPACITY 3.25"-42.5" DIAMETER CAPACITY NON-POWERED NEW COT $5200.00

1978 HAEUSLER VRM-HY 12X1.5 #2000420

• used

• Manufacturer: Haeusler
• Model: VRM-HY

SERIAL WO10554 NEW 1978 MODEL VRM12/3 CAPACITY 1.5" LENGTH 144" ROLLS 4 HYDRUALIC

1968 HAEUSLER VRM-HY-3000x12 #0302618

• used

• Manufacturer: Haeusler
• Model: VRM-HY

SPECIFICATIONS: 10' x 1/2" Haeusler Initial Double Pinch Plate Bending Roll Hertz, 3 Phase. Hydraulic Drop End Front & Rear Pressure Gauges E-Stop Controller Stationary

REIS TUS 180 OK-200 DOWN ACTING 4-POST HYDRAULIC SPOTTING PRESS Z23100YYY

• used

• Manufacturer: Reis
• Model: TUS

60" STROKE 104" DAYLIGHT 76.75" X 86.75" BED 74" X 53" BETWEEN POST HY PRESSURE 200 BAR PN PRESSURE 5 BAR ROLLING BOLSTER T SLOTTED RAM AND BOLSTER 1988 PRESSURE 2000 KN 440 V 84,000 LBS APROX

224 Ton Reis Hydraulic 4 Post Spotting Press z23026

• used

• Manufacturer: Reis
• Model: TUS

Serial#04.023.00 Capacity: 224 Ton Table Size: 71" lr x 98" fb Swivel Platen Size: 71’ lr x 98” fb Stroke: 106” Dayllight Opening: 118” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force ...

112 TON REIS SPOTTING PRESS Z22034A

• used

• Manufacturer: Reis
• Model: TUS

53" STROKE 53" DAYLIGHT 60" X 48" TABLE FLIP OUT UPPER PLATTEN SLIDE OUT BOLSTER T SLOTS RAM AND BOLSTER 4 POST 1984 Estimated Weight: 28,000 lbs Approximate Overall Dimensions: 10’6” L-R x 8.6” F-B x 15’ High

120 TON PIRANHA SINGLE END PUNCH 12081B

• used

• Manufacturer: Piranha
• Model: SEP

MODEL: SEP-120 SERIAL #: SEP120-145 120 TON PUNCH 1-1/2" HOLE THROUGH 1" MAXIMUM MATERIAL 5" MAXIMUM HOLE THROUGH 1/4" MATERIAL 2" STROKE 21.5" THROAT DEPTH 12-1/4" OPEN HEIGHT 10-1/4" CLOSED HEIGHT WITHOUT DIE...

48" x .062" Dallas Servo Feeder 18026C

• used

• Manufacturer: DALLAS

Maximum stock width capacity: 48 inches | Thickness capacity: .020" - .062" / .125" at 18" | Pilot release: yes | Feed lengths: 0 - 999.99 | Adjustable height cabinet: Yes | Direction of feed: Right To Left F...