Used Bending & Forming

2" GREENLEE MODEL 795 HORIZONTAL HYDRAULIC TUBE BENDER. #0742622

• used

• Manufacturer: Greenlee

HYDRAULIC UNIT INCLUDED Stroke of cylinder: 8"

14 STAND GILLFORD -HILL ROLLFORMER BASE WITH CONE DRIVE GEAR BOXES. #0207722

• used

CONE DRIVE GEARBOXES Ratio: 20-1 | H.p. or o.t: 3.47 | Rpm: 1750 | C.l: 1 | Motor: 30 HP

14 STAND X 3-1/2" X 50" BRADBURY SHADOW PANEL RAFTED ROLLFORMING LINE. #0205722

• used

• Manufacturer: Bradbury

TOOLED FOR SHADOW & CENTENNIAL PANEL Number of stands: 14 | Number of rafts: 3 RAFTS OF 4, 1 OF 2 | Arbor diameter: 3-1/2" | Roll space: 50" | Horizontal centers: 20" | Vertical adjustment: 5" - 10" | Equal geari...

1995 BRADBURY RF420-3.5-44-14 #0733822

• used

• Manufacturer: Bradbury

14 STAND DUPLEX LOCKFORMER SS2 LIP PROFILE 16 STAND DUPLEX LOCKFORMER L-816 MACHINE IS TOOLED FOR STANDING SEAM 360 & STANDING SEAM

ARDCOR S-F #0950721

• used

• Manufacturer: Ardcor

LOWER SPINDLE TO BASE ...... Number of stands: 12 | Space for stands on base: 16 | Arbor diameter: 1-1/2" | Roll space: 5-1/2" | Horizontal centers: 10" | Vertical adjustment: 4" TO 5-1/4" | Equal geared: YES | D...

1972 TISHKEN : #0737321

• used

• Manufacturer: Tishken

16-HMW-1-3/4 Number of stand: 16 | Arbor diameter: 1-3/4" | Max roll width: 12" | Vertical adjustment: 4-1/2" - 5-3/4" | Horizontal centers: 9" | Line speed: 50 FPM | Hp: 15

ROPER WHITNEY PEXTO M.24 #0414521

• used

• Manufacturer: Pexto

Throat: 24" | Manual hand crank: YES

ROPER WHITNEY PEXTO 63 #0415521

• used

• Manufacturer: Pexto
• Model: 63

Capacity: 16 GA | Length: 30" X 22 GA

Southern Machine Double End Tube Bender #0105317

• used

EQUIPPED WITH: Hydraulic Tank Electrical Panel Push Button Control Panel Motor: Hydraulic Unit: 7.5 HP, 230 / 460 / 3 / 60 OVERALL DIMENSIONS: 5′ x 4′ x 6′ APPROXIMATE WEIGHT: 2,200 Lbs.

Adige #x2 Tube and Bar Cut-Off Saw #0103417

• used

• Manufacturer: Adige

SPECIFICATIONS: OVERALL DIMENSIONS: 18′ x 4′ x 6′ APPROXIMATE WEIGHT: 3,550 Lbs.

Double End Special Tube Bender #0103917

• used

EQUIPPED WITH: Hydraulic Tank Electrical Panel Push Button Control Panel Parts Counter Motor: Hydraulic Tank: 10 HP, 230 / 460 / 3 / 60 OVERALL DIMENSIONS: 9′ x 5′ x 5′ APPROXIMATE WEIGHT: 1,600 Lbs.

1976 BROOKES 1922 #0100417

• used

• Manufacturer: BROOKES

FENN #20 #0102417

• used

• Manufacturer: FENN

MACHINE SPECIFICATIONS: Aluminum Low Carbon Steel Stainless Steel Beading: 2" x .095" (50.8 mm x 2.41 mm) 1-3/8" x .072" (34.9 mm x 1.82 mm) 1" x .065" (25.4 mm x 1.65 mm) Reducing: 2-1/2" x .109" (63.5 mm x 2.76...

60" OD x 12,000 Lbs. Samuel Strapping Systems Banding Line (Used)

• used

General Specifications: Manufacturer: Samuel Strapping Systems Year of Manufacture: 2006 O.D. Range: 28" - 60" Mult. Height: 5/8" - 24" Weight Capacity: 12,000 Lbs. Line Includes: Coil Car, Above Floor Tu...