Used Bending & Forming in Ontario, Canada

1981 ASAHI OKUMA AOT-12B

• Manufacturer: Okuma
• Model: AOT-12B

Equipped With * Brankamp Process Monitor * Exit magnetic conveyor

HARTFORD 5-250

• Manufacturer: Hartford
• Model: 5-250

Equipped With * Wire straightener * Ace monitor Maximum wire diameter: 5/16" | Maximum shank length: 1-9/16" | Maximum blank length: 2-13/16" | Production: 250 PPM | Motor: 30hp | Electrics: 575v/3/60 | Weight,ap...

1994 ASAHI SUNAC AT-1210

• Manufacturer: ASAHI SUNAC

Equipped With Maximum cutoff diameter: 13mm (.512") | Maximum die kickout: 100mm (3.937") | Output: 180 PPM

ASAHI OKUMA AOT-4B

• Manufacturer: Okuma
• Model: AOT-4B

Equipped With Maximum wire diameter: mm | Max. cut-off length: 35mm | Min. cut-off length: 8mm | Max. kickout length: 25mm | Min. kickout length: 6mm | Output: 400ppm

1975 NAKASHIMADA H-20E

• Manufacturer: Nakashimada

Equipped With * PKO * Variable speed Maximum wire diameter: 6.0mm (.237") | Maximum cut-off length: 95mm (3.740") | Max shank length: 75mm (3") | Production speed: 180-200ppm | Main motor: 7.5hp | Net weight,appr...

1977 NAKASHIMADA H-20AU

• Manufacturer: Nakashimada

Equipped With Maximum wire diameter: 6.0mm (.237") | Maximum cut-off length: 70mm (2.755") | Max shank length: 55mm (1.968") | Production speed: 180-200ppm | Main motor: 7.5hp | Net weight,approx: 7,500 lbs

1988 CARLO SALVI RF/550

• Manufacturer: Carlo Salvi

Equipped With Features: * ACE 200 Monitor * Punch mechanism for manufacturing semi-tubular rivets

1996 NAKASHIMADA TH2-6A

• Manufacturer: Nakashimada

Equipped With Features: * PKO Maximum cutoff diameter: 7 millimeters | Maximum cutoff length: 95 millimeters | Minimum cut-off length: 1/2" (12mm) | Maximum kickout length: 3 inches | Minimum die kickout: 3/8" (1...

Double-sided storage shelves w/ contents to include heavy-duty pipe elbows, pipe clamps, pipe

(1) Double-sided storage shelves w/ contents to include heavy-duty pipe elbows, pipe clamps, pipe coupling & pipe flanges, welded flange, flapper drain seat & timing cups, extra heavy-duty pipe elbows & screw fla...

1978 ASAHI OKUMA AOC-6

• Manufacturer: Okuma

Equipped With Bushing Cut-Off Stripper Maximum wire diameter: 1/4" | Maximum die knockout: 2-1/2" | Maximum cut-off length: 95mm | Output: 200 PPM

2005 JERN YAO JBF-10B-2S

• Manufacturer: JERN YAO

Equipped With Maximum cutoff diameter: 8mm | Maximum die knockout: 60mm | Maximum cut-off length: 70mm | Max pko length: 12mm | Forging power: 25ton | Products max size: 6mm (1/4") | Products max length: 50mm | P...

1978 HILGELAND CH-6VA

• Manufacturer: Hilgeland

Equipped With * PKO Maximum Wire Diameter-Mild Steel: 20mm Maximum Wire Diameter-Alloy Steel: 20mm Standard Tool Dimensions::

Asphalt Pump Flanges Only Qty 2

• Manufacturer: Diamond Bilt

Flanges that hold your bearing in place for you asphalt pump on your Diamond Bilt bracket.

4 Gallon Wheeled Banding Machine

• Manufacturer: Seal-Rite

Dispenses a uniform 3″ (76mm) banded finish up to 1/8″ (3mm) thick over cracks Made of durable 14 gauge steel Wear shoe is reversible, extending its life by at least three times before replacing Use with hot or c...

2 7/16″ Flange Bearing for 850-2,000 Gallon Tanks

• Manufacturer: Seal-Rite

2 7/16” Flange Bearing for 850-2,000 gallon tanks NOTE: Hydraulic parts are not returnable, and most parts are shipped unpainted. ***All Hydraulic Parts are Non-Returnable*** Features: Size: 2-7/16 inches Desi...