Used Machine Tools in Saxony, Germany

Angular Clamping Device WMW

• Manufacturer: WMW

Execution of the clamping surface vertical: H: 1150mm; W: 1005mm; surface finished, 49 pcs. threaded holes M24; sideways 7 pcs. semicircular recessesØ 100 x 82 mm (each side) Execution clamping surface foot: L: 5...

WMW AW 200x500x300

• Manufacturer: WMW

2 pieces available ( price per piece) Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Table length: mm | Table width: mm | Table load: t | Width: 200 mm | Depth...

WMW AW 1270x1000x1600

• Manufacturer: WMW

2 pieces clamping angle available ( Priece per piece) T-slot according to DIN 650 a=35mm; b=60mm; c=27mm; h=65mm

WMW AW 350x315x120

• Manufacturer: WMW

3 pieces available with base plate (A+B+C) 1 piece available without base plate (D) Dimensions of the base plate: W: 350 x D: 320 x Thickness: 30mm

WMW 655x500

• Manufacturer: WMW

model: angular frame with double stiffness vertical plate: - size W: 655 x H 500 x thickness: 40mm - with clamping holes, long holes and center hole foot plate: - size: B:655 x L:420 x thickness : 40mm - with lon...

Binder MPS 1000 x 300

• Manufacturer: Binder

Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm

WMW AW 1250x970x1600 (17)

• Manufacturer: WMW

1 piece to DIN 650: T-slot width a= 36; h= 62; b= 62; c= 27 mm, T-slot spacing 200 mm

WMW AW 1100x1000x610

• Manufacturer: WMW

Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 ( DH315x3 ) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm ( left-hand thread ) bore: Ø 30 mm, depth: 55 mm used, tested !

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 315 x 3 ( DH315x3 ) TGL 30-2333 3x threaded hole: M12 x 1.75, depth: 30 mm used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 centering Ø: 139 / 135 mm, depth: 19 mm ( conical ) used, tested !

TOS 3-jaw chuck

• Manufacturer: TOS

3-jaw chuck, three-jaw chuck TOS 100/3-1-M1 New ! N: max. 5300 rpm | Outside ø: 100 mm | Centering ø: 80 mm | Hole circle ø (chuck): 90 mm | Bore ø: 23 mm | Height with jaws: 69 mm | Dimensions ( lathe chuck ): 1...

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 200 x 3-III ( DH200x3-III ) TGL 30-2333 New !

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 315 x 4 ( DH315x4 ) TGL 30-2333 with chuck key used, tested !