Used Machine Tools in Bavaria, Germany

Trusted Seller
2016 ELB SWBDE 012 EASYTOUCH-PLC
- Manufacturer: ELB
- Model: SWBDE
- Grinding length: 1,200 millimeter
FLECKENSTEIN Werkzeugmaschinen GmbH contact: Mr. Fleckenstein
Kleinostheim, Germany
Trusted Seller
1993 MAKA VHP180
- Manufacturer: Maka
mobile spindle Working width: 180 mm | Working height: 120 mm | Work waves: 4 | Spindle arrangement: bottom, right, left, top | Motor power lower shaft: approx. 5.5 kW | Motor power shaft right: approx. 5.5 kW | ...
Egenhofen, Germany
Trusted Seller
1979 Johannsen T82
- Manufacturer: Johannsen
Bandwidth: 150mm | Ribbon length: mm | Table size: approx. 2600mm x 1000mm | Engine power: 3kW | Mass: 900kg
Egenhofen, Germany
Trusted Seller
1993 Hang 162-01
- Manufacturer: Hang
Nietmaschine / Riveting machine Hang 162-01Serial-No. 39709
Emskirchen, Germany
Trusted Seller
ZIMMER SPEEDY 150/2
- Manufacturer: Zimmer
Lieferumfang: 1x Korund A36 (150x25x20 mm) 1x weiß finishing A 100 (150x40x20 mm)
Günzburg, Germany
Trusted Seller
GEKA PUMA 80 S
- Manufacturer: Geka
- Model: Puma 80
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Stroke: 70mm | Work height max.: 1094mm | Throat: 500mm | No. of strokes: 20Hub/min | E...
Günzburg, Germany
Trusted Seller
GEKA PUMA 110 S
- Manufacturer: Geka
- Model: Puma 110
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 110t | Throat: 500mm | Engine output: 9kW | No. of strokes: 28Hub/min | Strok...
Günzburg, Germany
Trusted Seller
1997 Schmedt PräCut Typ 65
- Manufacturer: Schmedt
Abstanz- und Einkerbmaschine / Cutting and Notching machine Schmedt PräCut 65 Baujahr / Year 1997 - Serial-No. 79 Book block height: up to 350 mm Book block thickness: up to 90 mm Air supply: 10 bar Power supply:...
Emskirchen, Germany
Trusted Seller
2010 WFL M100-6500 89-001663
- Manufacturer: WFL
WFL Millturn M100 - Used machine available immediately The WFL M100-6500 is a turning and milling center for the complete machining of large and long components. Turning and milling machines combine the main spin...
Olching, Germany
Trusted Seller
ELUMATEC AS 70
- Manufacturer: Elumatec
- Model: AS70
Control: conventional - | Storage location: Location | Freight basis: Delivery ex location. | Speed: 12000rpm. | Weight of the machine approx.: kg | Number of milling agregates: St. | Motor output: kW
Günzburg, Germany
Trusted Seller
GEKA PUMA 55 SD
- Manufacturer: Geka
- Model: Puma 55
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 55t | Hole diameter in sheet thickness: Ø 40 in 10mm | Throat: 750mm | Stroke...
Günzburg, Germany
Trusted Seller
GEKA PUMA 55 S
- Manufacturer: Geka
- Model: Puma 55
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 55t | Hole diameter in sheet thickness: Ø 40 in 10mm | Throat: 500mm | Stroke...
Günzburg, Germany
2021 MTE FBF-S7000
- Manufacturer: MTE
MTE FBF-S7000 cross-slide milling machine: Control: HDH TNC640 HSCI Travel: X- 7,000 mm Y- 1.300 mm Z- 1,500 mm Clamping surface: Length: 6000 mm Width: 1100 mm Height: 850 mm Automatic milling head: d...
Nördlingen, Germany
Trusted Seller
1969 WILHELM SIMON L15
- Manufacturer: Simon
- Model: L15
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Rotary table dia.: mm | Max. slide. of grinding wheel: mm | With manual ongoing: 0 | Manually feed: 0
Günzburg, Germany
2008 Deckel Maho DMC60U duoblock
- Manufacturer: Deckel / Maho
- Model: DMC 60 U DUOBLOCK
5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time...
Nördlingen, Germany