Forging roll Eumuco RW1
- Manufacturer: SMS Eumuco
- Model: RW1
Type Forging rolls Manufacturer Eumuco Model RW1 Max. Dia of Workpiece 55 mm Diameter of Rolling Segment 370 mm Usable width of middle roll 500 mm Usable width of outer roll 160 mm Max length of working pi...
Germany
Forging rolls Erfurt RW1 D
- Manufacturer: Erfurt
Type Forging rolls Manufacturer Eumuco Model RW1 D Max. Dia of Workpiece 55 mm Diameter of Rolling Segment 370 mm Usable width of middle roll 500 mm Usable width of outer roll 160 mm Max length of working ...
Germany- Trusted Seller
2004 ENKOTEC NA03
- Manufacturer: ENKOTEC
Diameter range: 2.2-3.4 mm | Nail length: 55-90 mm | Output – pieces/min: 1100
Norderstedt, Germany - Trusted Seller
Pneumatic hammer HUTA ZYGMUNT MPM 3.150 C
Used pneumatic drop forging hammer HUTA ZYGMUNT MPM 3.150 C. The hammer is in good condition and has already been dismantled. There are two used rams and brand-new and unused bulkhead inserts for the hammer.
Kehl, Germany - Trusted Seller
2003 Matrix 150 Ton Matrix 150 Ton
- Manufacturer: Matrix
Matrix 150 Ton 2003 The press is Hydraulic with 12 axes controlled in force, position and speed.
Germany - Trusted Seller
PSP POHONY multi-disc brake
Multi-disc brake, Brake PSP POHONY ELB 6.3 24V CSN 02 6573 ( ČSN 02 6573 ) 4 clutch disks used, tested !
$375 USDZschepplin, Germany - Trusted Seller
PAGUS rail wheel, drive wheel
- Manufacturer: Pagus
Rail wheel, flanged wheel, heavy-duty wheel, drive wheel PAGUS Ø 250 x 50 Shaft diameter: Ø 48 / 55 mm, length: 90 / 200 mm, groove width: 14 / 16 mm Further rail wheels available here: Search results rail wheels...
$645 USDZschepplin, Germany - Trusted Seller
Vesuvius cup lining
Ladle lining, transport ladle, crucible insert Vesuvius, Foseco Insural* 140 ATL 1800 SB (1270.1) Inner diameter: Ø: 1,000 mm New !
Zschepplin, Germany - Trusted Seller
Turning device from – for the production of spirals 16294
Turning device, forging device, welding turning device, welding device
Wiefelstede, Germany - Trusted Seller
Blacksmith vice 135 mm from – clamping width 150 mm 18931
Forge vice, bottle vice, anvil vice, anvil, forge anvil, bench vice, fitter's vice, parallel vice
Wiefelstede, Germany - Trusted Seller
Anvil base
Addition: Used cast iron anvil base with hornwood lining Height 400 mm Height of the two cams 50 mm Weight (filled with concrete) approx. 270 kg
Wiesbaden, Germany 
1979 GFM SX 13
- Manufacturer: GFM
- Power requirement: 280 kilowatt
The line is complete with: - Forging Machine SX-13 - 2 (two) Manipulators with Beds -- Max. diam. in the Manipulator: 130 mm -- Manipulator torque force: 3 kN -- Manipulator high travel speed: 500 mm/sec. -- Mani...
Monheim am Rhein, Germany
1975 GFM SX 40
- Manufacturer: GFM
- Power requirement: 1,600 kilowatt
The line was mechanically overhauled in 1991 with an increase in forging force to 900 tonnes/hammer and a new CNC control system - CNC control GFM CNC - Forging machine SX-40 - 2 manipulators with beds -- Manipu...
Monheim am Rhein, Germany2000 SALVI - 246/TR/TB 4 Blow 2 Die Cold Header
- Manufacturer: Carlo Salvi
- Model: 246
This: 2 | Max. o: 8 mm | Max.shaft length: 60 mm | Max pieces per min.: 250
Altdorf bei Nürnberg, Germany
VORONEZH, FORGING ROLL, CA1335, ID.A1427
- Manufacturer: Voronezh
- Model: CA1335
Nominal force, kN: 800 Nominal center distance between rolls, mm: 320 Center distance ajustment, mm: +/-3 Roll rotation frequency, mm: 65 Max. stock diameter, mm: 95 Tooling dimensions, mm: - diameter 180 ...
Germany
Tip: Enter manufacturer, model or keyword
