Processing » Extruders » USA

Building Filters

16

Used wire processing machine in USA

  • Trusted Seller
    APV 16" Servo Driven Wire-Cut

    APV 16" Servo Driven Wire-Cut and Continuous Rope Extruder with Guillotine Cutter

    • Manufacturer: APV

    APV 16" Servo Driven Wire-Cut and Continuous Rope Extruder with Guillotine Cutter - Built new in 2010 - Originally designed to cut pucks of cookies onto wax paper sheets - All servo driven - Allen Bradley control...

    Pennsylvania, USA
  • Trusted Seller
    American Machine & Design 16"

    American Machine & Design 16" Wire Cut Extruder

    • Manufacturer: AMERICAN MACHINE & DESIGN

    American Machine & Design 16" Wire Cut Extruder - Model 060999 - Serial number JN106 - Fully rebuilt by Imperial in 2023 - 9 Outlet die with 7/8" openings - Filler block - Rollers are NOT jacketed - Variable spee...

    Florida, USA
  • Trusted Seller
    Vemag Discharge Conveyor & Pneumatic

    Vemag Discharge Conveyor & Pneumatic Wire Cut

    • Manufacturer: Vemag

    Vemag Discharge Conveyor & Pneumatic Wire CutDischarge Conveyor - 54 in. long x 6 in. wide, adjustable height - Min 29.5 in, Max 36 in., angle discharge, SS Frame, on casters. Electrical requirements: 230 volt, 6...

    Stanton, ND
  • Trusted Seller
    Extrusion Screws for Extruder Machines

    Extrusion Screws for Extruder Machines All 3 Screws = One Price 1-1/2" dia & 1-1/4" dia

      🔹 Lot of 3 Plastic Extruder Screws – 40" Long – Excellent Condition! Condition: Used – Excellent Quantity: 3 Screws (sold together – one price for all three) Location: Central Falls, Rhode Island – USA -------...

      $1,295 USD
      Central Falls, RI
    • NEW Nakata Triplex Sidewall 200P

      NEW Nakata Triplex Sidewall 200P x 200P x 200P Extruder

      • Manufacturer: NEW Nakata

      One (1) NEW Nakata 'TRIPLEX 200P×200P×200P' Triple Sidewall Rubber Extruder, Piggyback Configuration, Cotter Clamp Type, Model TRIPLEX 200P×200P×200P, S/N E235067~5077, YOM 2025, Description of Asset: φ200mm Pin ...

      Cleveland, OH
    • Trusted Seller
      1985 HOLTON ALUMINUM CONFORM EXTRUSION

      1985 HOLTON ALUMINUM CONFORM EXTRUSION LINE

      • Manufacturer: HOLTON

      Holton Conform Extrusion Rod Line: EX-482 Manufacture: - Holton Conform Inc. - New 1985 +/- - Model: C300H Equipment: - 9.5 mm diameter Wire Rod Uncoiler Reels - Wire Rod Straightener - Cleaning Unit (new rotat...

      Banner Elk, NC
    • Auction
      Extruder Guillotine

      Extruder Guillotine

        Extruder Guillotine, Consisting of twin 26" wide wire cut extruder assembly depositing on a 26" wide x 96" long sanitary belt, with 26" wide guillotine cutting blade, mounted on mobile all stainless frame with re...

        Santa Rosa, CA
        Visit Auction Website
      • GSD-35 - 3D Printer Filament

        GSD-35 - 3D Printer Filament Extrusion Line – Turnkey, Low Hours

        • Manufacturer: GS Mach - Nanjing GS-mach Extrusion Equipment Co.,Ltd

        Complete turnkey filament extrusion line for PLA, ABS, and PETG. Produces 1.75 mm and 3.0 mm filament with tight diameter control. Includes mixer, dryer, 35 mm single-screw extruder, laser diameter gauge, servo h...

        $25,000 USD

        Get financing

        Est. $471/mo

        Evanston, IL
      • Trusted Seller
        HOLTON CONFORM ALUMINUM CONFORM EXTRUSION

        HOLTON CONFORM ALUMINUM CONFORM EXTRUSION LINE

        • Manufacturer: HOLTON CONFORM

        Used 1985 Holton Conform Extrusion Rod Line (Model: ALUMINUM CONFORM EXTRUSION LINE), perfect for your pressing, extrusion needs. It comes equipped with 9.5 mm diameter Wire Rod Uncoiler Reels, Wire Rod Straighte...

        North Branford, CT
      • 6″ Davis Standard 30:1 –

        6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder

        • Manufacturer: Davis-Standard
        • Model: Thermatic

        6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder 6″ Davis Standard Model 600S Thermatic Extruder 8″ x 8″ water cooled square feed throat, all new gearbox bearings (less thrust) 17.21 gearbox rat...

        Rockville Centre, NY
      • Trusted Seller
        12" x 62" Witte Screener,

        12" x 62" Witte Screener, Single Deck

        • Manufacturer: Witte

        Used 12" x 62" Witte Screener, 1 Separation 54" High In-Feed Height, 48" Discharge Height 1/2 HP Baldor AC Motor, 230/460(Currently Wired For 460) Starter Box MISSING SCREENS MISSING CLAMPS S/N 1753-1 Machine Has...

        United States
      • Trusted Seller
        8" x 40" CDS Cleated

        8" x 40" CDS Cleated Two Belt Puller, Model CCH 40-8, 3hp, New in 2005

        • Manufacturer: CDS

        Used 8" x 40" CDS Cleated Puller, Model CCH 40-8 40" L x 8" W Belts, Manual Height Adjustment 3HP Baldor Motor, 1750rpm, 180Volt - 14Amp Nord Gearbox, 31.92 Gearbox Ratio Durant Ft/min Speed Gauge, Start/Stop But...

        United States
      • Trusted Seller
        1.25" Conair CSC-2L Servo Fly

        1.25" Conair CSC-2L Servo Fly Cutter, 3.25 HP, New In 2013

        • Manufacturer: Conair

        Used 2" Conair CSC-2L Servo Fly Cutter, 3.25 HP 1.25" Max Profile Diameter 42" Centerline Height (Adjustable) 2800 RPM Blade Speed Aluminum Cutter Head, 2 - Position 460/3/60 7" PLC Color Touch Screen High Speed/...

        United States
      • Trusted Seller
        1.75" Conair CSC-2 Servo Fly

        1.75" Conair CSC-2 Servo Fly Cutter, 3.25 HP, New In 2013

        • Manufacturer: Conair

        Used 1.75" Conair CSC-2 Servo Fly Cutter, 3.25 HP 1.75" Max Profile Diameter 42" Centerline Height (Adjustable) 2800 RPM Blade Speed Aluminum Cutter Head, 2 - Position Right To Left Operation 460/3/60 7" PLC Colo...

        United States
      • Trusted Seller
        1.5" Killion Single Screw Extruder,

        1.5" Killion Single Screw Extruder, Model KN-150, 30:1 L/D, 15 HP

        • Manufacturer: Killion

        4 Barrel Zones (Plugged), 3 Downstream Zones, Air Cooled Standard Single Stage Screw 48" Centerline Height 2.5" x 3" Feed Throat w/ Slide Plate 15 HP DC Motor w/ Blower 1750 RPM 500 Volt, 26.5A Shunt Winding, Dri...

        United States
      12

      Overview

      Extruders are machines used in the manufacturing process to shape materials by forcing them through a die. Commonly used in plastic and metal industries, extruders are essential for creating products like pipes, sheets, and profiles. Their versatility allows them to handle various materials, including polymers, rubber, and even food products.

      FAQ

      What should I consider when buying a used extruder?

      Evaluate the extruder's condition, age, and previous usage. Check for signs of wear, especially on the screw and barrel, and ensure the machine has been well-maintained.

      How do I ensure the extruder is shipped safely to my location?

      Hire a logistics company experienced in transporting heavy machinery. Make sure the extruder is properly secured, and all parts are protected from damage during transit.

      What is the maintenance schedule for an extruder?

      Regular maintenance includes inspecting the screw and barrel for wear, checking and replacing filters, and ensuring the cooling and heating systems are functioning properly. Follow the manufacturer’s guidelines for specific maintenance intervals.