Used Processing in Hamburg, Germany

1968 Schlatter BS 800-
- Manufacturer: Schlatter
Block saw Standard saw blade 600 mm, but a blade with 800 mm is also possible. More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de
Hamburg, Germany
1998 SIMEC LM2000/212
- Manufacturer: Simec
- Model: LM 2000
Marble polishing line Slabs with 10 polishing heads per slab + 2 calibration units (80 cm) Slab loading carriage Intermediate roller conveyors Tilt-type slab unloading roller conveyor More used machines at: www.j...
Hamburg, Germany
1998 Pellegrini DF2000-
- Manufacturer: Pellegrini
- Model: DF2000
Wire saw for marble and granite. Dimensions: 10 x 1.5 x h6 m Maximum block size: 4.1 x 2.2 m Diamond wire length: 19.70/21.70 m Diamond wire speed: 0-40 m/s More used machines at: www.janssen-usedmachines.com New...
Hamburg, Germany
2001 Comandulli EDILUX 10+4 DX-
- Manufacturer: Comandulli
- Model: Edilux
Edge polisher machine straight edges 10 heads straight edge, 4 bevels 2 + 2 Working direction from left to right More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-stei...
Hamburg, Germany
2007 Burkhardt Hensel V 598 OSA-
- Manufacturer: Burkhardt-Hensel
5-axis bridge saw with band Vacuum manipulators for moving (2) Saw blade 350 mm More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de
Hamburg, Germany
2003 Montresor LOLA 1000
- Manufacturer: Montresor
- Model: Lola 1000
Edge grinder for straight edges Grinding and polishing of straight edges with upper and lower chamfers, Calibration 8 heads for straight polishing 3 upper and 3 lower spindles for chamfering Water drop unit The m...
Hamburg, Germany
1995 Levi Tunisi LT 1204-
- Manufacturer: Levi Tunisi
- Model: LT
Block cutter for marble complete with unloading and cross cutter (crosscut saw) Saw blade 1,550 mm Motor 150 hp Complete with trolley, unloading and crosscut saw Voltage V. 380 Hz 50 More used machines at: www.ja...
Hamburg, Germany
2003 Bavelloni Egar 250-4
- Manufacturer: Bavelloni
- Model: Egar 250
CNC Machining Center The machine has only 2,300 operating hours! X-axis 2,730 mm Y-axis 1,620 mm Z-axis 300 mm Tool positions: 19 Table size: 2,500 x 1,200 mm The machine comes complete with all the tools shown i...
Hamburg, Germany
2005 Omag Mill 4X-
- Manufacturer: Omag
- Model: Mill 4X
CNC machining center with 4 axes 25-position tool magazine Collet replaced with original Saccardo parts. Touchscreen and computer are brand new Approximately 20 steep taper chucks are also included with the machi...
Hamburg, Germany
2003 Fraccaroli & Balzan G 210
- Manufacturer: Fraccaroli & Balzan
Wire saw Prepared for automatic cuts Block trolley with electric rotation (needs repair) Voltage: V. 380 Hz 50 More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steint...
Hamburg, Germany
2015 Pedrini GS220-F64-P93
- Manufacturer: Pedrini
Multiwire completely overhauled with a 6-month warranty 64 wire ropes Bead diameter: 6.2 mm Including two new standard trolleys Cable drum More used machines at: www.janssen-usedmachines.com New stone processing ...
Hamburg, Germany
2012 Steinex 75 T-
- Manufacturer: Steinex
Stone splitting machine Blade width: 400 mm Maximum splitting height: 200 mm Splitting force: 75 tons Voltage: 400 V 50 Hz More used machines at: www.janssen-usedmachines.com New stone processing machines: www.ja...
Hamburg, Germany
ECS VMS80-
- Manufacturer: ECS Eich
Water treatment 80m3 / flow per hour Filter press KRP 500/12 plate size 500 x 500, 12 filter plates More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de
Hamburg, Germany
2004 GMM Lexta 36 FULL
- Manufacturer: GMM
- Model: Lexta 36
Bridge saw Max. saw blade diameter: 825 mm Optional: Automatic table, swivel head, frequency converter for motor pulley The frequency converter pulley, display, and motor pulley were replaced in November 2024. Vo...
Hamburg, Germany
2015 Intermac Master 850
- Manufacturer: Intermac
CNC machining center/CNC bridge saw 60-tool magazine Saw blade included Bsolid CAD/CAM software Machine equipped with deposition tools, drain, and drums for straight edges Vacuum cleaner included More used machin...
Hamburg, Germany