New Processing

Carbon Steel Water Cooled Chiller - IPP# 216599

• Manufacturer: Trane

Dual direct drive semi-hermetic centrifugal compressors rated 0.45Kw/ton efficiency. Driven by (1) 893KW (LH Circuit) and (1) 946KW (RH Circuit) motors, 4160V, 60Hz, 3 Phase. Uses low pressure refrigerant to prod...

Centrifuge-Peeler 630 mm (24.8 in) Stainless Steel Austenitic - IPP# 212741

• Manufacturer: ZVU (Czech Rep)

With available documents and parts.

Stainless Steel Austenitic Centrifuge-Disc Bowl - IPP# 238461

• Manufacturer: Alfa Laval

S1657 with control system With Clean In Place with an Ra0.8 finish. Variable discharge system with water cooled jacket Maximum feed density 1100 kg/m3, maximum sediment density 1400 kg/m3. Feed temperature 0-100 ...

Centrifuge-Disc Bowl 7.5 kW (10.1 HP) - IPP# 99750

• Manufacturer: Westfalia

frame with out bowl. Clarifier (2-phase) design IP55 motor Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check. Drive by standard flange mount motor. Power transmitted via...

Centrifuge-Disc Bowl 37.3 kW (50 HP) Stainless Steel - IPP# 70801

• Manufacturer: Westfalia

disc nozzle centrifuge Disc stack specs 14 3/8" OD, 1mm caulks, 40 deg angle, (15) discs w/semi-circular rising channels on OD, 1" wide x 1 1/2" deep 3/60/230/460 volt w/fluid clutch Tools, instruction book

Stainless Steel 316 Centrifuge-Disc Bowl - IPP# 75408

• Manufacturer: Disco

flameproof motor Openings: 1" x 2" (25mm x 50mm), 2-1" (25mm) With on/off switch and tools

Manual Discharge-Top Centrifuge-Basket 850 mm (33.5 in) Stainless Steel 316 - IPP# 46415

• Manufacturer: Sangerhausen

perforated basket centrifuge

Manual Discharge-Top Centrifuge-Basket 500 mm (19.7 in) Lined - IPP# 38876

• Manufacturer: Cepa

epoxy lined perforated basket centrifuge 8-10 batches/h W/3000 watt heating unit and 4 CBM/min air blower for automatic drying. Hinged top cover.

Stainless Steel 316 Batch-Type Agitated Bio Reactor - IPP# 247274

Glasslined UGE UA-1000 Batch-Type Agitated Reactor - IPP# 246488

• Manufacturer: Standard Glass Lining Technology Limited

Purchase reactor Assembly

Glasslined EHW Thale G6.3/1e-5H0.6-0.6EHW-N680/03 Batch Type Body Only Reactor - IPP# 48732

• Manufacturer: Thale

Glasslined Schwelm Batch Type Body Only Reactor - IPP# 85050

• Manufacturer: Schwelm

reactor/crystallizer body

Glasslined EHW Thale N680 Batch-Type Agitated Reactor - IPP# 73696

• Manufacturer: Thale

base reactor Int rated 88 psi @ 392 deg F (0.6 MPA @ 200 deg C); jkt rated 147 psi @ 392 deg F (1.0 MPA @ 200 deg C), 147 psi w/full vac int. stuffing box type seal.

Glasslined 3V Tech GA4000 Batch-Type Agitated Reactor - IPP# 246595

• Manufacturer: 3V Tech

R-0208 Built 2017 Motor EX proof & VFD compatible

Glasslined RL-2 Batch-Type Agitated Reactor - IPP# 95699

RL-2 Series glass lined reactor Cyclo agit drive Mdl BLY22-13-55 5.5 KW, 3/50/380 volt, Anchor agit and probe.