Construction » Excavators » Germany

Building Filters

12

Used test machine in Germany

Perkins engine truck engine Volvo D4 excavator wheel loader
- Manufacturer: Volvo
For sale is a used Perkins engine / Volvo version in very good condition. The engine was installed in a Volvo truck. Technical specifications: Complete with starter and alternator. Test run on-site is possible. O...
Dänischenhagen, Germany
2022 Hidromek HMK 150 WR-H4 Stage 5/ Demonstration machine
- Manufacturer: Hidromek
- Hours: 210 h
Operating hours: 210 | Operating weight of the machine: 17,550 kgDrive (engine-hydraulic undercarriage)Turbo Diesel engine Deutz TCD 4.1, 105 kW/ 141HP, Max. Torque 550 Nm. 4,100 cm³2 axial piston pumps, Max. Fl...
$152,554 USD
Get financing
Est. $2,871/mo
Lübeck, Germany
JCB mini excavator 19C-1 Pro
- Manufacturer: JCB
- Model: 19C-1
- Horsepower: 19 hp
Engine: Perkins 3-cylinder diesel engine 403D-07, 11.7 kW at 2550 rpm, displacement 762 ccm, fuel tank 18.5 Ltr. Hydraulics: Piston pump nominal capacity 42 liters, pump capacity additional circuit 32 liters. Cha...
Steiningen, Germany
2024 JCB 35Z-1 mit Herstellergarantie
- Manufacturer: JCB
- Horsepower: 25 hp
- Hours: 430 h
Auxiliary headlights, cab, hydraulics, UVV, rubber tracks JCB short tail excavator 35Z-1 zero tail Equipment: - ROPS/TOPS tested comfort cab with heating and tempered glass Dqop77 - 300 wide rubber tracks - short...
Ulm, Germany
2023 JCB 8029 CTS
- Manufacturer: JCB
- Model: 8029 CTS
- Horsepower: 25 hp
- Operating weight: 2,867 kg
low-emission 3-cylinder Perkins diesel engine (Stage IIIA) 1,496 liter displacement max. 18.4 kW (24.7 HP) 2 axial piston variable pumps and 1 garden pump Two-speed travel drive with automatic switching Trave...
Göppingen, Germany
2021 JCB Hydradig 110 W
- Manufacturer: JCB
- Model: Hydradig 110W
- Horsepower: 109 hp
- Operating weight: 11,457 kg
JCB Ecomax 4-cylinder diesel engine (Tier 4f), 8-fold tyres 9.00-20 Solideal, parallel dozer blade on rear axle, adjustable boom with dipper arm 2.0 m, hammer/shear and 2 x swing bucket hydraulics (electrically p...
Göppingen, Germany
1994 O&K Fahrölmotor RH 8
- Manufacturer: O&K
Cruise engine (VOAG Volvo) with brake valve for O & K crawler excavators RH 8 / RH 6 PMS, O & K Part number 1450706, used, tested condition
Berlin, Germany
2023 JCB 16C-1
- Manufacturer: JCB
- Model: 16C-1
- Horsepower: 15 hp
- Hours: 10 h
demonstration machine about 160 hours basic machine: hydraulic adjustable undercarriage 3-cylinder Perkins diesel engine (EU Stage V), 11.7 kW (15.9 hp) axial piston pump Auxiliary hydraulic circuit (AUX I) doubl...
Bakum, Germany
2018 JCB 19C-1
- Manufacturer: JCB
- Model: 19C-1
- Horsepower: 19 hp
- Hours: 2,045 h
Furnishing: - ROPS/TOPS tested comfort cab with protective safety film - 230 mm wide rubber tracks - LongPitch - servo-hydraulic ISO pilot control: ; Hammer/shears and swivel bucket hydraulics, electroprop. - Spr...
$18,921 USD
Get financing
Est. $372/mo
Bakum, Germany
2018 JCB 19C-1
- Manufacturer: JCB
- Model: 19C-1
- Horsepower: 19 hp
- Hours: 2,150 h
Furnishing: - ROPS/TOPS tested comfort cab with protective safety film - 230 mm wide rubber tracks - LongPitch - servo-hydraulic ISO pilot control: ; Hammer/shears and swivel bucket hydraulics, electroprop. - Spr...
$15,374 USD
Get financing
Est. $302/mo
Bakum, Germany
2024 Epiroc HBC 4000 | 2300 kg | 25 - 40 t |
- Manufacturer: Epiroc
Hydraulic Hammer used- completely overhauled. Working weight 2300 kg. For Excavators from 25 up to 40 t. Piston, all wear parts, seal set and diaphragm are new. Hammer housing overhauled so that the Hydraulic Ham...
Herdecke, Germany
1988 O&K Schwenkgetriebe / Swing gear
- Manufacturer: O&K
- Model: SCHWENKGETRIEBE
used swing gearbox for O&K excavator series E, F; G MH / RH 6 ; RH 8 before PMS; complete with swing brake, used, tested condition
Berlin, Germany

Overview

Excavators are heavy construction equipment used for digging, lifting, and moving large objects. They feature a boom, dipper, bucket, and cab mounted on a rotating platform, making them ideal for excavation, demolition, and material handling tasks in construction and mining industries.

FAQ

What should I consider when buying a used excavator?

Check the machine's age, hours of operation, maintenance records, and overall condition. Pay attention to any signs of wear or damage, particularly on the boom, bucket, and hydraulic system.

How do I ensure the excavator is shipped safely to my location?

Use a reliable transport service experienced in handling heavy machinery. Ensure the excavator is properly secured and protected during transit, and confirm the transport complies with local regulations.

What is the maintenance schedule for an excavator?

Regular maintenance includes checking fluid levels, inspecting hydraulic lines, greasing pivot points, and examining tracks or tires. Follow the manufacturer's maintenance manual for specific intervals and procedures.