- Trusted Seller

Paint box
Type plate: missing | User manual: No | Length: Approximately 2200mm | Width: About 2500mm | Height: About 2400mm
Hässleholm, Sweden 
2014 Restatic Lightweight panel board machine
- Manufacturer: Restatic
Special custom made high volume machine to produce lightweight panels from paperboard directly from reels. Surface layer (furniture foil, melamine paper, felt, cotton, polyester, aluminium can be applied in the ...
Sweden- Trusted Seller

Blasting cabinet ILB-Maskiner 1200
- Manufacturer: ILB-maskiner
Pedal Filter Gun Gloves Width: 1330mm (measured on the outside) | Height: 1850mm | Depth: 800mm | Working width: Approx. 900mm (inside the cabinet)
Uppsala, Sweden - Trusted Seller
Uppsala, Sweden - Trusted Seller

Hydraulic click press Sieck Sandt type 410
- Manufacturer: Sandt
Year according to: Documentation | Tank volume (l): 30 | Width: 970mm | Height: 1530mm | Depth: 930mm | Other measurements: Table dimensions: 900x550mm Press dimensions: 550x550mm Two-handed grip. | Loading assi...
Upplands Väsby, Sweden - Trusted Seller

Exhaust gas meter Enviroclean SGA 400
- Manufacturer: Enviroclean
Width: 0.6 m | Height: 1.3 m | Depth: 0.3
Upplands Väsby, Sweden 
2014 Vooner FloGuard VG3/-M
- Manufacturer: Vooner FloGuard
The unit has been used for 3d wet moulding of cellulose fibres
Sweden- Trusted Seller

Paint box Dent Extend with drying box, ventilation, extraction and vehicle lift
- Manufacturer: Dent Extend
Year according to: Documentation | Type plate: missing | User manual: Yes, included | Other measurements: Paint box outer dimensions Approximate length 8000mm Approximate width 4800mm Approximate height 3400mm D...
Hässleholm, Sweden - Trusted Seller
SEPAMATIC SEPA 1200
- Manufacturer: Sepamatic
SEPAmatic 1200 separator is a belt separator with the highest efficiency and reliability. It was created mainly for the separation of poultry and red meat, where the force needed to process these raw materials m...
Ystad, Sweden - Trusted Seller

Impact press/marking press 3 tons - MB20
Type plate: missing | User manual: No | Weight (kg): 35 kg | Width: 205 mm | Height: 650 mm | Depth: 309 mm | Loading assistance with: Truck
Söderköping, Sweden - Trusted Seller

BLAST CHILLER/FREEZER SQX FT2080
- Manufacturer: Sin of Cold
Blast chiller/Freezer delivered by Colia Sweden AB. All information is in the uploaded brochure. Warranty valid for 12 months. Service and installation offered by Assemblin across Sweden.
- Trusted Seller
VC-999 QS8 + VC-999 K8T1A-SP
VC-999 chamber machine with associated VC-999 wrapping machine which has previously been used for large whole cheese blocks.
Ystad, Sweden - Trusted Seller
SPICER
Ekeby Stainless mod Spicer 50 liter tumbler year mod 2012 Speed 26 rpm.Very nice condition! Dimensions 80 x 70 cm Height 110 cm.
Ystad, Sweden - Trusted Seller
Danfotech / Nutridan
- Manufacturer: Danfotech
Danfotech / Nutridan mod MA 250 T mobile timber on wheels. Can be connected to vacuum. Dimensions 110 x 90 cm H 130 cm.
Ystad, Sweden - Trusted Seller
Scanio tumbler
- Manufacturer: Scanio
Scanio tumbler with associated stand prepared for vacuum. Dimensions 110 x 85 cm Height 130 cm.
Ystad, Sweden 
Stephan UM Agitators, Blenders, Mixer
- Manufacturer: Stephan
- Model: UM
Good condition Stephan UM Agitators, Blenders, Mixers available between 1996 and 2012 years. Located in France and other countries. Click request price for more information.
France

