Used Machine Tools in Thuringia, Germany

1988 HELMERDING ERH 100 B
- Manufacturer: HELMERDING
Equipment: - Final drive - shaft with 3 bearings - Semi-automatic stroke adjustment - circulating oil lubrication - Hydraulic clutch - Separate hydraulics with oil cooler The machine is partially overhauled by us...
Schmölln, Germany
BAD SALZUNGEN MHD 250/4
- Manufacturer: ambold pressen- und maschinenbau
unbraked reel with pressure roller new painted Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 250 mm | Coil weight: 2.5 t | Inner coil diameter: 450 - 530 mm | Sh...
Schmölln, Germany
1992 TOX-Pressotechnik PC 30.56
- Manufacturer: TOX Pressotechnik
- Stroke length: 200 millimeter
- Throat depth: 250 millimeter
Power pack press - The presses are equipped with a pneumohydraulic power cylinder. equipped. This divides the total stroke into an air-driven, and a hydraulic power stroke that starts automatically when the press...
Schmölln, Germany
1987 GSW SCHWABE LHM 80/650
- Manufacturer: Herman-Schwabe
motorized reel Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 150 mm | Coil weight: 80 kg | Outer coil diameter: 650 mm | Thorn height: 1000 mm | Expansion area: ...
Schmölln, Germany
1977 SMERAL LENP 40 A
- Manufacturer: Šmeral Brno
- Model: LENP 40 A
- gear train - tiltable - table platen - mechan. Overload protection in the ram (break plate) - pneum. clutch
Schmölln, Germany
1978 MÜLLER CD 63.12.14
- Manufacturer: Muller
- workspace enclosure with Sick light barrier - large plunger with ejector and trunnion clamping piece - foot switch - motorized depth stop in cylinder
Schmölln, Germany
KEPROMA AG DOD 40/100
- Manufacturer: ambold pressen- und maschinenbau
- Demonstration model with branded overhauled control system - NC roll feed servo power with direct drive - plasma nitrided rolls - backlash free drive - strip side guide Performance data at 180 degrees - 1000 st...
Schmölln, Germany
WANZKE GMD I
- Manufacturer: ambold pressen- und maschinenbau
- Motorized double-turn reel - newly painted Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Coil weight: 2 x 0.15 t | Span area: 265 - 485 mm | Bandwidth: 200 mm | Tape streng...
Schmölln, Germany
2013 CHIN FONG G2-160 V
- Manufacturer: CHIN FONG
- safe for manual insertion - Conversion to west - Light barrier
Schmölln, Germany
1986 JELSINGRAD BPA 15
- Manufacturer: Jelsingrad
Run only 2 years High-speed Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 015 t | Installation height: - mm | Hubzahlen per minute: 200 - 2000 | Table surface: - mm...
Schmölln, Germany
1977 DUNKES ESPZ 63/28
- Manufacturer: Dunkes
- Model: ESPZ 6328
- Draw cushion Press not safe for manual insertion work
Schmölln, Germany
1981 MÜLLER SZ 40.30.1
- Manufacturer: Muller
- Model: SZ 40301
with hydr. Die cushion speeds: Rapid advance speed 240 mm / s continuously adjustable
Schmölln, Germany
1997 ZEULENRODA PED 100/3
- Manufacturer: Zeulenroda
- Model: PED 1003
- Increased installation height - with draw cushion - converted to safe control (Pilz PLC), safe for manual insertion work on the open mold
Schmölln, Germany
HOLZMANN AKM 1020PS folding machine
- Manufacturer: Holzmann
Product information "HOLZMANN AKM 1020PS folding machine" General dimensions Working length in mm 1020 Sheet metal processing Max. thickness of flat material in mm 2 Max. bending angle 135° Max. opening width in ...
$2,090 USD
Ilmenau, Germany
Holzmann metal grinding machine with suction...
- Manufacturer: Holzmann
Product information "Holzmann MSM150ABS metal grinding machine with suction" The HOLZMANN MSM150ABS metal sanding machine with dust extraction is the perfect choice for your metal sanding work. With two sanding b...
$1,509 USD
Ilmenau, Germany