- Trusted Seller
2006 Emco MCP 100-50
- Manufacturer: Emco
2006 Emco MCP 100-50 The EMCO MCP 100-50 is a CNC milling machine that is equipped with two pallets. This configuration enables precise machining of workpieces while the second pallet can already be re-clamped. ...
Linz, Austria 
BOLEY NB Lathe-conventional-electronic
- Manufacturer: BOLEY
3 lathes, partly incomplete Control: conventional | Freight basis: in stock | Turning diameter: / mm | Turning length: / mm | Circumferential diameter over bed carriages: / mm | Total power requirement: / kW | Ma...
Niederkappel, Austria
1998 SCHWEIZER Lathe CATALANO CCR 320 2000 Lathe - cycle-controlled
- Manufacturer: SCHWEIZER Drehmaschine
- Spindle bore: 105 mm
- Power requirement: 15 kW
4x chisel holder 1x face plate ø560mm Control: Fagor CNC 800T | Freight basis: in stock | Turning diameter: 650 mm | Turning length: 2000 mm | Spindle bore: 105 mm | Turning diameter over bed: 380 mm | Chuck diam...
Niederkappel, Austria
Speedomatic Super ½ automatic sliding headstock lathe
- Manufacturer: Speedomatic
Sliding headstock lathe with bar tube Freight basis: in stock | Turning diameter: 12,7 mm | Number of revolutions: max 8600 rpm | Turning diameter over bed: / mm | Total power requirement: kW | Machine weight app...
Niederkappel, Austria
BECHLER AR10 sliding headstock automatic lathe
- Manufacturer: Bechler
- Model: AR10
- Power requirement: 2.2 kW
If the machine should always run at maximum speed, the use of electric motors with electric motors with 3000 rpm is recommended Motors with other characteristics and any brand can be installed without can be fitt...
Niederkappel, Austria
TORNOS M 7 sliding headstock automatic lathe
- Manufacturer: Tornos
- Model: M7
- Power requirement: 2 kW
Control: conventional | Freight basis: in stock | Spindle diffuser: 7 mm | Turning length: 60 mm | Spindle speeds: 1400-10000 rpm | Accessories and equipment: 5 Cross slide | Total power requirement: 2 kW | Mach...
Niederkappel, Austria
TORNOS R-10 sliding headstock automatic lathe
- Manufacturer: Tornos
- Model: R10
- Power requirement: 3 kW
Milling and drilling unit RA 20-OC-1 on tool 1 Milling unit 26 BA + accessories
Niederkappel, Austria
STROHM M105 sliding headstock automatic lathe
- Manufacturer: STROHM
- Power requirement: 1.5 kW
Control: conventional | Freight basis: in stock | Spindle diffuser: 10,5 mm | Turning length: 100 mm | Rpm number: 1120-10000 | Total power requirement: 1,5 kW | Machine weight approx.: 0,85 t | Space requiremen...
Niederkappel, Austria
STROHM M105 EN Sliding headstock automatic lathe
- Manufacturer: STROHM
- Power requirement: 1.5 kW
7 pieces in stock Miscellaneous accessories Freight basis: in stock | Spindle diffuser: 10,5 mm | Turning length: 100 mm | Spindle speeds: 1120-10000 rpm | Accessories and equipment: 5 Cross slide | Total power r...
Niederkappel, Austria
MAS A20B Sliding headstock automatic lathe
- Manufacturer: MAS - Kovosvit
- Model: A 20 B
- Power requirement: 8 kW
Control: conventional | Turning diameter over bed: 240 mm | Spindle diffuser: 20 mm | Turning length: 350 mm | Spindle speeds: 23 - 4457 rpm | Total power requirement: 8 kW | Machine weight approx.: 1,5 t | Spac...
Niederkappel, Austria
MANURHIN TR 22 B Sliding headstock automatic lathe
- Manufacturer: MANURHIN
- Power requirement: 3.7 kW
with bar tube Freight basis: in stock | Spindle diffuser: 22 mm | Turning length: 75 mm | Number of revolutions: 3200 U/min | Total power requirement: 3,7 kW | Machine weight approx.: 1,7 t | Space requirement ap...
Niederkappel, Austria
STROHM M105 NAR sliding headstock automatic lathe
- Manufacturer: STROHM
- Power requirement: 1.5 kW
4 pieces in stock Miscellaneous accessories Freight basis: in stock | Spindle diffuser: 10,5 mm | Turning length: 70 mm | Spindle speeds: 1120-10000 rpm | Accessories and equipment: 3-Spindel-Bohrapparat | Total ...
Niederkappel, Austria
1975 KERN D560 Draw and lead screw lathe
- Manufacturer: Kern
- Model: D560
- Spindle bore: 63 mm
Digital display in X Accessories and tools, face plate 2x Lynette Army ø310mm
Niederkappel, Austria
Bernardo Universal lathe Standard 165 Plus
- Manufacturer: Bernardo
- Model: Standard 165
- Spindle bore: 40 mm
The Standard 165 Plus turning lathe is an enhanced version of the reliable 150- models. The feed drive was given an overhaul in terms of user-friendliness and the gear head design received a state of the art look...
Bernardo lathe Profi 550 PRO / 230 V
- Manufacturer: Bernardo
- Model: Profi 550
- Spindle bore: 26 mm
The Profi 550 PRO turning lathe feature a high speed range up to 3000 rpm as well as a large range of standard accessories (for instance DC-motor with frequency inverter, main spindle bearing in P5-quality, etc.)...
Tip: Enter manufacturer, model or keyword