- Trusted Seller
2006 FRYER EASY TURN ET-14 CNC MANUAL COMBINATION LATHE, 14" x 40"cc, NEW VERY GOOD CONDITION FROM UNIVERSITY
used
- Manufacturer: Fryer
- Model: ET-40
FRYER EASY TURN MODEL ET-14 CNC MANUAL COMBINATION LATHE, 14" x 40"cc, NEW 2006 VERY GOOD CONDITION FROM UNIVERSITY AML Stock #002976 MODEL ET-14 FRYER CNC / MANUAL COMBINATION LATHE, 14" x 40"cc WITH TOUCH 2000 ...
- Trusted SellerAuction
2017 DMG Mori Mdl. NLX2500 700 CNC Lathe
used
- Manufacturer: DMG Mori
- Model: NLX 2500
2017 DMG Mori NLX2500/700 CNC Lathes, 14.4” Maximum Workpiece Diameter, 27.9” Maximum Workpiece Length, 4.1” Bar Diameter, Travels: X-10.2”, Y-4.7”, Z-31.3”, 6,000 RPM Spindle Speeds, Complete with Live Tooling, ...
McHenry, ILVisit Auction Website - Trusted Seller
1992 Tacchi HD3
used
- Manufacturer: Tacchi
- Model: HD3
Machine Dimensions: Equipped With: Siemens 810 CNC Control 4-Position Turret 36″ 4-Jaw Chuck (3) Steady Rests Chip Conveyor
- Trusted SellerAuction
Okuma LB35-II CNC Lathe
used
- Manufacturer: Okuma
- Model: LB35 II
Okuma LB35-II CNC Lathe, w/ 12-Position Turret, Approximately 12" Chuck, Tailstock, Chip Conveyor, OSP U100L Controls, S/N: 0694
Mount Pocono, PAVisit Auction Website - Trusted Seller
2011 Hardinge GS-51
used
- Manufacturer: Hardinge
- Model: GS 51
Equipped With: Fanuc Oi-TD Control C Axis Live Tooling Big Bore Spindle Air Chuck Parts Catcher Chip Conveyor Tailstock
- Trusted Seller
1999 Leadwell LTC-30BPL
used
- Manufacturer: Leadwell
- Model: LTC30BPL
Rapid Feed Rate: X-axis: 393 Ipm Rapid Feed Rate: Z-axis: 472 Ipm Equipped With: Fanuc OT Control Tailstock Tool Setter Chip Conveyor Long Bed
- Trusted Seller
2013 Doosan Puma 300C
used
- Manufacturer: Doosan
- Model: PUMA 300C
Machine type: CNC Lathes | Machine location: Upon Request | Stock #: 377929 | Control: Fanuc Oi Control | Spindle: A2-11 | Spindle motor: 35 hp | Max rpm: 2,800 RPM | Turret: 12 -station turret | Bed type: 45-de...
- Trusted Seller
2013 Samsung SL-20
used
- Manufacturer: Samsung
- Model: SL20
Equipped With: Fanuc 0i-TD Chip Conveyor Tool Presetter Tailstock Parts Catcher
- Trusted Seller
2008 Okuma Mac Turn 550W
used
- Manufacturer: Okuma
Equipped With: Okuma OSP-P200L Control Full Contouring B-Axis Universal Head 15″ Chuck Available Manuals Magnetic Chip Conveyor Multiple sets of misc Jaws Misc sets of different size collets Tool Holders with Too...
- Trusted Seller
2011 Hurco TM8
used
- Manufacturer: Hurco
- Model: TM8
EQUIPPED WITH: WinMax CNC Control Conversational Programming Tailstock 10 Position Tool Turret All Available Manuals Under 500 Hours Very Clean & Light Use- From Individually Owned Shop
- Trusted Seller
2013 Haas ST-10
used
- Manufacturer: Haas
- Model: ST-10
Equipped With: Haas CNC Control Tool Presetter Chip Auger All Service Reports
- Trusted Seller
1999 Takahashi Microstar TNC-LO2-NCL
used
- Manufacturer: Takahashi
Specifications (subject to buyer verification): Equipped With: Manuals Makino Linear Pallet Pool System (MMC2) -24 pallet pool system -3 setup stations
Hyundai HIT-30S CNC Lathe, Siemens Sinumerik Controls
used
- Manufacturer: Hyundai
- Model: HIT-30S
“Hyundai HIT-30S CNC Lathe with Siemens Sinumerik ControlsLocation: Stevensville, MichiganNote: Buyer is responsible for removal and transportation.This machine was fully functional when placed into storage but h...
- Trusted Seller
Wickman ACW 6-57 Multi-Spindle Screw Machine
used
- Manufacturer: Wickman
- Model: ACW
Wickman ACW 6-57 Multi-Spindle Screw Machine
Indianapolis, IN - Trusted Seller
2021 CKG CKG 32
used
- Manufacturer: CKG
Equipped With: Siemens 808D Control Machine type: CNC Lathes | Machine location: Arizona | Stock #: 835449 | Max. swing over bed: 12.6″ | Max. swing over cross slide: 3.9″ | Max. turning diameter: 1.57″ | Max. tu...
Miyano BNJ42SY3 CNC Lathe
used
- Manufacturer: Miyano
- Model: BNJ42SY3
Good condition Miyano BNJ42SY3 CNC Lathes available between 2010 and 2011 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
