Used Processing in Indiana, USA

North American Combustion 4445N-3 Gas Burner Slotted Tile High Velocity Tempest

• Manufacturer: North American Combustion

In Good Used Condition. Removed from a spare parts storage. Slotted end. Size 3 We did not test these. Surplus items If this item ships as Flat Rate Freight please see details in Shipping tab

North American Combustion 4445-3 Gas Burner Slotted Tile High Velocity Tempest

• Manufacturer: North American Combustion

In Good Used Condition. Removed from a spare parts storage. Slotted end. 38" overall length Size 3 We did not test these. Surplus items No spark plug on this lot. If this item ships as Flat Rate Freight please se...

Graco 235282 Stainless Fluid Pressure Regulator 100 PSI

• Manufacturer: Graco

In Good Used Condition, Removed from a Working Environment. Needs to be cleaned out. If this item ships as Flat Rate Freight please see details in Shipping tab

Apiste ENC-2900L-UL FA Cooler Electrical Enclosure AC Cooling Unit 220V 5A 3Ph

• Manufacturer: Apiste

Used, in Good Working Condition. If this item ships as Flat Rate Freight please see details in Shipping tab

Apiste FA Cooler Electrical Enclosure AC Cooling Unit 230V 6.5A 1110W 1Ph

• Manufacturer: Apiste

Used, in Good Working Condition. Made in 2016 Cord end is missing. If this item ships as Flat Rate Freight please see details in Shipping tab

Karguard Vertical Compressed Air Receiver Tank 400 Gallon 125 PSI 36"x 8' 8"

• Manufacturer: Karguard

In Good Used Condition. Mfg Date 1976. Capacity 400 gal. MAWP 125 PSI @ 450°F Has top and bottom drain ports. Various sized side ports up to 4" NPT. This was pressure tested. If this item ships as Flat Rate Frei...

CNC Milling Machine Fixture Table 22"x22"x29" Steel Cast Iron Plate Block

In Good Used Condition. 5/8-11 threaded holes. 22 x 22" Stands 29"H Overall dimensions. Top work surface is not tapped. Not all holes are tapped. Some shavings still inside. The lifting eyelet is not included in ...

Hydac OKA-R4 L/2.0/40/M Fan Driven Oil Cooler 10.5X13" Radiator 1.5Hp D230/Y460V

• Manufacturer: Hydac

In Good Used Condition, Removed from a Working Environment. Tested good @480V Delta 220/230/240/254/260/275 Y 380/400/415/440/460/480 If this item ships as Flat Rate Freight please see details in Shipping tab

Copeland 6DK1-3500 Semi-Hermetic Discus Compressor 35 Ton 3Ph 208-230/460V

• Manufacturer: Copeland

Used. Removed From a Working Environment. Rated for 35 ton. Pulled from a large cooling system. No cover for the terminals. If this item ships as Flat Rate Freight please see details in Shipping tab

Thermal Care HQ2A1603LXA Accuchiller LX Water-Cooled Chiller 15Hp 208V 3Ph Laser

• Manufacturer: Thermal Care

Used, in Good Working Condition. 208-230v 3 phase 15 hp compressor This unit was in operation. This was a chiller for a laser unit. 1.5 hp pump. If this item ships as Flat Rate Freight please see details in Shipp...

Binks 42-6510 High Pressure Paint Heater 110v 50/60hz Explosion Proof 3000psi

• Manufacturer: Binks

In Good Used Condition, Removed from a Working Environment. If this item ships as Flat Rate Freight please see details in Shipping tab

ITT Bell & Gossett GPX161-051 Plate Heat Exchanger 150 PSI 2" NPT 32"x 12"

• Manufacturer: Bell & Gossett

In Good Used Condition. Removed from a Working Environment. Model # GPX161-051. Mfg Date 1997. 32-1/4"L x 12-1/2"W Plate frame. 1-1/4" Plate thickness. 2" NPT Inlet/Outlet ports. 5" Plate pack width. Stainles...

Preferred Packaging PP180828 Heat Shrink Tunnel 220V 40A 60Hz 1PH Top Only

• Manufacturer: Preferred Packaging

Used, in Good Working Condition, Tested OK. This is the top unit only. No conveyor. Company this came from probably just mounted on their own conveyor system. This heats up to couple hundred degrees so not just a...

BKW DL65-3KKDI Refrigerated Chiller Cooling Oil Chiller 480V 3Ph 60Hz N 1700 Min

• Manufacturer: BKW

Used, in Good Working Condition Older unit. Pulled from a working unit. This is a remote unit. Not all the controls are with this unit. Newer Tecumseh compressor. AV134TT-036-J7 If this item ships as Flat Rate Fr...

Multipack Heat Shrink Tunnel Roller Conveyor 480V For Repair

• Manufacturer: Multipack

Unit has been idled in storage, will need serviced and repaired, some parts may be missing or need replaced. 8"conveyor width x 80" length. 19"W x 18"H tunnel opening. 31" Length. 30" outside width. 92" Overall...