Used Milling Machines in Osaka, Japan

Milling

• Manufacturer: Hitachi
• Model: 2MW-V

Used Hitachi Milling 2MWV (y1978),

Milling

• Manufacturer: Takeda
• Model: TK-US-3N

Used Takeda Milling TK-US3N (y1989),

1997 KSJP Type ----

Control number "No. C-0 5 Made by Makino Milling Machine ( NT 40 ) Model: KSJP

1997 TK - VS 3 N type

Control No. "No. C-0 4 Made by Takeda Machine ( JIS No.5 ) Model "TK-VS 3 N

1992 KVJP - Type 55

Control number "No. C-0 7 Makino Milling Machine ( NT 40 ) Model: KVJP-55

1997 KE - 55 type

Control number "No. C-0 1" Makino Milling Machine ( BT 40 ) Model: KE-55

1988 KGJP - Type 55

Control number "No. C-0 8 Makino Milling Machine ( NT 40 ) Model: KGJP-55

1997 2 KGA Type ----

Control number "No. C-0 6 Made by Makino Milling Machine ( NT 40 ) Model: 2KGA

1998 FMR - 40 type

Control No. "No. C-0 2 Okuma Howa Machinery ( NT 40 ) Model "FMR-40

Milling

• Manufacturer: OKK
• Model: MH3V

Used OKK Milling MH-3V (y1970),

2013 Nigata Machine Techno JK1500

• Manufacturer: ニイガタマシンテクノ

Distance from the top of the chuck to the end of the spindle (φ 200): 138～483 mm Cutter tip diameter (face milling) : φ 200 mm (rough, finishing) φ 200 mm (Rough, finishing) φ 315 mm (Finishing) Electromagnetic c...

2015 Nigata Machine Techno JK2000

• Manufacturer: ニイガタマシンテクノ

Distance from the top of the chuck to the end of the spindle (φ200): 138～495mm Cutter tip diameter (face milling): 200mm (rough, finishing) φ200mm (Rough, finishing) φ315mm (Finishing) Electromagnetic chuck with ...

2024 YAMAZAKI GIKEN YZ-8WR (S/No.10389)

• Manufacturer: 山崎技研

Travel X: 850 Y: 400 Z: 520 mm NC 2 axis (X, Y axis), Z axis manual Bullstat type tool attachment/detachment device (BT50) Chip coil conveyor Air blower for cutting chips (manual) Cutting tank (60L) Processing gu...

2024 YAMAZAKI GIKEN YZ-8WR (S/No.10388)

• Manufacturer: 山崎技研

Travel X: 850 Y: 400 Z: 520 mm NC 2 axis (X, Y axis), Z axis manual Bullstat type tool attachment/detachment device (BT50) Chip coil conveyor Air blower for cutting chips (manual) Cutting tank (60L) Processing gu...

2016 YAMAZAKI YZ-500WR

• Manufacturer: 山崎技研

Travel X: 1,250 Y: 550 Z: 520 mm Distance from spindle to table top: 140 to 660 mm Required area: 3,350×2,070 mm Height: 2,475 mm X-axis stroke extension (stroke 1250 mm) Chip coil conveyor (inside the machine) T...