Used Forging

17,000 lb (7,800 kg) Eumuco Electro-

• Manufacturer: SMS Eumuco

Additional info: Work resulting a blow: 10,000kgm (real 80,000kgm) Height of fall: 590mm Weight of ram hammer: 7,800kg Shut height: 330~660mm Clearance distance between guidance: 940mm Depth of ram hammer: 1,000m...

10,000 lb Chambersburg model "L" Closed

• Manufacturer: Chambersburg CECO "L" Power Drop

Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...

80 tonne Heavy Duty Asian Built Oil Hydraulic

• Manufacturer: Asian Built

Still installed and available for immediate inspection and delivery.

100 ton Clearing HG-100-25 C-Frame

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

500kW Interpower 2-1/4" to 6" Induction Billet Heater,

Description: 500kW Interpower 2-1/4" to 6" Induction Billet Heater

1,000 ton OWZ 16" Bar diameter

Additional info: Model - HRW-1000 Working Range: Rounds: Ø 100 – 400 mm Squares: 400 x 400 mm Straightness of the bar Ø 320: 10 – 45 mm Ø 210: 10 – 25 mm Ø 130: 15 – 40 mm Ø 90: 25 – 40 mm Weight of the bar -...

2,500 ton Voronezh KB8344 Heavy

• Manufacturer: Voronezh

Available for immediate inspection Very Good Condition

6000mm dia Kaltek Ring Rolling Mill, 80~1100 Ring Height

Additional info: Replacement of PLC Control system, PLC Main panel & Operator's panel to brand new Siemens S7-400 Upgrade of Hydraulic system Replacement of packing and seals Replacement of bearings Current Volta...

1970 1,200 ton Hatebur AMP-70 4-Die, max bar dia

Still installed and under power for inspection Very Good working condition Available for immediate inspection and delivery

1980 440 ton 3-1/2" dia Peddinghaus Caddy 80 Bar

• Manufacturer: Peddinghaus

Additional info: Cutoff capacities at material tensile strengths: Rounds: psi 65,000 - 3.500" psi 92,000 - 3.156" psi 121,000 - 2.750" Squares: psi 65,000 - 3.937" psi 92,000 - 3.562" Flats: psi 65,000 - 7" x 1.3...

1980 1,200 ton National model 6-4 Heavy

• Manufacturer: National

Complete with: Spare parts as follows : (1) Main Electric Motor (2) Adjusting Wedges (1) Upper transfer finger assembly (1) Lower transfer finger assembly (1) Die Block clamping piston This National 6-4 was used ...

3,500mm Asian Built Radial Axial Ring Rolling Mill Re:24925

• Manufacturer: Asian Built

Dia: 3,500 mm | Height: 800 mm | Builder: Asian Built | Radial: 280 tonnes | Axial: 180 tonnes | Min dia: 650 mm | Number of main roll motors, current type & power of each: One DC @ 500kW | Number of axial roll ...

2,800mm Banning RWW H120/V100 CNC

• Manufacturer: Banning

Max Ring diameter - 2,800mm (110") Max Ring height - 500mm (19.7") Radial tonnage - 120 tons Axial tonnage - 100 tons Max Ring Blank weight is 2,000 kg Radial (King) Roll drive power - 315 kW (422 hp) Axial (Edgi...

1970 250 ton Hatebur AMP-30 3-Die, 120ppm,

Dia: 40 mm | Tons: 250 tonnes | Builder: Hatebur | Part dia: 64 mm | Max cutoff length: 72 mm | Max die ejector: 70 mm | Min cutoff length: 19 mm | Max outer dia for combination parts: 55 mm | Max width across t...

1995 740 ton AMD model 740-2630 Bar & Billet Shear,

• Manufacturer: AMD

Bar dia: 156 mm | Max sqr: 137 mm | Model #: 740-2630 | Force: 671.3 tonnes | Ram stroke: 457 mm | Net weight: 16,783 kgs