- Trusted Seller
2005 +GF+ AGIE AGIETRON ADVANCE 3 with C-Axis EDM
- Manufacturer: Agie - Charmilles
- Model: Advance 3
Germantown, WI - Trusted Seller
2012 INDUCTOTHERM VIP POWER TRAK
- Manufacturer: Inductotherm
Inductotherm VIP Power Trak, 75 KW, 3200 HZ, 100 Lift Swing.
Ohio, USA - Trusted Seller
NE C ELV2A 1ER106A001 Power Supply From a Makino EDM CNC
- Manufacturer: Makino
Removed from a working environment. If this item ships as Flat Rate Freight please see details in Shipping tab
$840 USDMillersburg, IN 
1999 MITSUBISHI EDM EA8
- Manufacturer: Mitsubishi
- Model: EA8
X: 11.8 in | Y: 9.8 in | Z: 9.8 in | Table size-w: 13.7 in | Table size-l: 19.6 in | Worktank inside dimensions: 30 x 20 x 10" | Max. workpiece weight: 1210 Lbs. | C-axis: Yes | Tool changer: Yes | # of stations...
Oak Park, IL
2005 MITSUBISHI EDM FA10S
- Manufacturer: Mitsubishi
- Model: FA10S
X: 13.8 in | Y: 9.8 in | Z: 8.6 in | Max. workpiece dimensions: 31.4 x 23.6 x 8.4" | Max. workpiece weight: 1100 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height: ...
Oak Park, IL
2003 MITSUBISHI EDM FA10M
- Manufacturer: Mitsubishi
- Model: FA10M
X: 13.7 in | Y: 9.8 in | Z: 8.6 in | Max. workpiece dimensions: 31.4 x 23.6 x 8.4" | Max. workpiece weight: 1100 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height: ...
Oak Park, IL
EDM DRILLMATE 22I
- Manufacturer: EDM DRILLMATE
Equipped with: - This machine can by run unattended by nc programming or can run manually with XY handles - Digital Readouts X, Y & Z - Glass Scales X, Y & Z | Hole-dia. (min): 0.004 in | Hole-dia. (max): 0.157 ...
Oak Park, IL- Trusted SellerAuction
New Berlin, WIVisit Auction Website - Trusted Seller
Como Filtration 210 Portable Filter Cart Hydraulic 11GPM 120V 3/4 Hp EDM
- Manufacturer: Como Filtration
Used, in Good Working Condition, Tested OK. Specs show this if for an EDM. Designed for EDM fluids. Each tank is rated for 20 pounds of dirt and 1 gallon of water. 3/4Hp Leeson Motor. 120V single phase. 60 PSI 11...
$4,275 USDMillersburg, IN 
2022 MITSUBISHI EDM SV12P
- Manufacturer: Mitsubishi
X: 15.7 in | Y: 11.8 in | Z: 11.8 in | Table size-w: 19.7 in | Table size-l: 27.5 in | Worktank inside dimensions: 37.4 x 27.5 x 17.7 | Max. workpiece dimensions: 35.4 x 25.6 x 13.8 | Max. workpiece weight: 2200...
Oak Park, IL2001 MITSUBISHI EDM FA20
- Manufacturer: Mitsubishi
- Model: FA20
X: 19.6 in | Y: 13.8 in | Z: 11.8 in | Max. workpiece dimensions: 31.5 x 23.6 x 8.5" | Max. workpiece weight: 1760 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height...
Oak Park, IL
2021 EDM DRILLMATE 22I
- Manufacturer: EDM DRILLMATE
Equipped with: 12 station electrode changer | Hole-dia. (min): 0.008 in | Hole-dia. (max): 0.118 in | X: 16.0 in | Y: 12.0 in | Z: 19.0 in | Work-w: 21.5 in | Work-l: 14.0 in | Cnc controlled: Yes
Oak Park, IL- Trusted Seller
MAKINO SP-43 #0236625
- Manufacturer: Makino
- Model: SP43
TRAVELS: MACHINE HOURS: Year of manufacturer: 2004 | X axis: 18" | Y axis: 22" | Z axis: 12.6" | Table size: 28.5" X 23" | Control: MGW-S | Power on: 29,978 | Auto run time: 19,304 | Machining time: 17,986
Toledo, OH - Trusted Seller
1996 CHARMILLES Roboform 30 #0150024
- Manufacturer: Agie - Charmilles
- Model: Roboform 30
-Some Tooling Included -Graphite Blanks Included Mfg: Charmilles | Yom: 1996 | Table size: 15.5" x 19.6", | X-axis: 13.7" | Y-axis: 9.8", | Z-axis: 11.9", | Max workpiece size: 31.8" x 20.4" x 13.3", | Max workpi...
Toledo, OH 
Elox 8-2012 Sinker EDM Machine
Specifications*: SPEC Below for Elox 8-2012DR, should be similar, buyer should verify before purchase EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open ...
Posen, IL
Cammann C-76 EDM machine
- Manufacturer: Cammann
- Model: C-76
Good condition Cammann C-76 EDM machines. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
