Used coil processing

FIMI 1250x.12-.80mm Tinplate Sheeting Line #0111

• Manufacturer: FIMI

€ 450.000 Installed and in operation Built: 1982 Revamped: 2008 and 2019 Process materials: tinplate; + also carbon and stainless steel (both raw and annealed) Sheet dims.: from 340x500mm to 1250x2000mm Max...

72″ x .075″ x 40000Lb Rowe / Herr Voss CTL Line

• Manufacturer: Herr Voss

used cut to length line for sheet metal processing 72″ x .075″ x 40,000Lb Rowe / Herr Voss CTL Line Entry Coil Car Floor Standing V-Type Design Powered Lift & Traverse Control Panel Mandrel Uncoiler 4-Leaf Mandre...

F&P Roll Feeder 2mm S.S. CTL Lines (New) #3533

• Manufacturer: Floreani & Partners

1000mm to 1500mm wide lines with precision straightener Material thickness up to 2mm S.S. Typical line speed: up to 65m / minute 10ton to 20ton decoiler -- Process materials: Stainless Steel, Electro-Galv. Steel,...

F&P 12mm CTL Lines (New) #3395

• Manufacturer: Floreani & Partners

New Flying Shear Cut To Length Lines 2100mm x 12mm HR, Galv., Pickled Steel CUSTOM DESIGNED -- 12m / 10 Tonne Sheet Stacker Speed max. 30m / min -- The process material -dry or oiled- is: galvanized, pickled st...

Cut-to-length line FIMI 2000x8mm x30t (A3769)

• Manufacturer: FIMI

Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to pr...

F&P 2500mm x 1-10mm Alu. CTLL #4376

• Manufacturer: Floreani & Partners

(For more details on this line please contact us, thank you) Line max. speed 50m / minute (max. 30m / minute recommended to reach laser cutting quality) Max tension on uncoiler for thickness range 1÷10mm: N 1...

'HONDA' Cut-to-Length Slitting and Shearing Line

• Manufacturer: 'HONDA'

‘HONDA’ Shearing Line with Side Trimmer and 2 x 6-High Finish Levellers 70 kgs/mm2 > tensile strength > 53 kgs kgs/mm2 52.5 kgs/mm2 > yield points > 21 kgs kgs/mm2 max. 60 mpm max. (0.3 – 2.0 mm) Mechanical equip...

Cut to length line Bronx CTL 1-5mm 400-1500 15 MT

used cut to length line for sheet metal processing Machine equipped with flying shear

Pivot Shear Trapezoid Shear Cut to Length

• Manufacturer: MH

Process flow: ↗ pressure lead Transportation → feeding → uncoiling → clamping initial bridge → transition → guide pressing → slitting → passing The straight end, the shovel-end Transit → guide → fine leveling → f...

Pivot Shear Cut to Length

• Manufacturer: MH

pivot shear cut to length, Oscillating Shear cut to length, trapezoid shear Cut to length. technical parameters: 1. Thickness of raw material coil plate: 1.5 ~ 6mm; 4, raw material plate inside diameter:, ф ф 508...

Cut to Length- Rotary Shear, Slitter, Leveler,

• Manufacturer: MH

Model, 800, 1000 Processing material, Cold-rolled steel coil, Galvanized coil,, Color-coated coil, Stainless steel coil, etc. Processing sheet thickness, 0.3-2.0 (mm), 0.5-3.5 (mm) Processing sheet width, Max 800...

China Machine Cut to Length Cheap Price Good Quality

• Manufacturer: MH

Coil processing line to shear and slit steel. Shearing line: 0.3~25mm thickness with different model machine, speed up to 90m/min. Slitting line: 0.25-14mm thickness with different coil width. Max speed: 120m/min...

Jp 3-1550 Cut to Length

• Manufacturer: MH

Coil processing line to shear and slit steel. Shearing line: 0.3~25mm thickness with different model machine, speed up to 90m/min. Slitting line: 0.25-14mm thickness with different coil width. Max speed: 120m/min...