Used Cnc Lathes

Mori-Say TMZ 518 Penta Multi-Spindle Automatic CNC Lathe

• Manufacturer: Penta

Mori-Say TMZ 518 Penta Multi-Spindle Automatic Lathe Elevate your machining capabilities with the Mori-Say TMZ 518 Penta, a pinnacle of precision and efficiency in the multi-spindle automatic lathe market. Desig...

2015 Okuma LU4000 EX

• Manufacturer: Okuma
• Model: LU4000 EX

Missing Controller Equipped With: Chip Conveyor **Have Inspection Report from Gosiger** Machine is unable to be powered on due to, The machine is missing the front control panel, computer hard drive and hardware....

2012 CHEVALIER FCL-1840 #0448525

• Manufacturer: Chevalier
• Model: FCL-1840

1996 WEILER E50/2 #0103723

• Manufacturer: Weiler
• Model: E50
• Spindle bore: 76.19999999999999 millimeter

MACHINE REBUILT IN 2014 Swing over bed: 22.4" | Swing over cross slide: 13" | Distance between centers: 78" | Spindle bore: 3" | Chuck size: 12" | Max rpm: 2500 | Tailstock: YES | Steady rest: YES | Boring bar ho...

2022 DMC DL-22LA

• Manufacturer: DMC

Equipped With: Fanuc 0iTF CNC Control Tailstock Parts Catcher Tool Parts Probe Chip Conveyor Box Ways

Okuma LU-25 Horizontal CNC Lathe Spindle Head Assembly

• Manufacturer: Okuma

In Good Used Condition. Was removed from an Okuma LU-25 Lathe. 3.2" Bore Dia. 3.5" at nose end. If this item ships as Flat Rate Freight please see details in Shipping tab

2000 Haas SL-40T

• Manufacturer: Haas
• Model: SL-40T

Equipped With: Haas CNC Control Chip Conveyor Tool Presetter All Available Manuals

2008 MILLTRONICS ML26/40 #0239225

• Manufacturer: Milltronics
• Model: ML26/40

SPECIFICATIONS: SWING OVER BED 27″ SWING OVER CROSS SLIDE 16.1″ SWING OVER GAP 34.2″ GAP DISTANCE 12.75″ BED LENGTH 40″ SPINDLE BORE 3" SPINDLE MOTOR 24/15 HP (GEARBOX) SPINDLE SPEED 1,600 RPM SPINDLE NOSE A1-11 ...

2012 MIGHTY VIPER VT-50AX/4000

• Manufacturer: Mighty Viper
• Model: VT50
• Spindle bore: 160.01999999999998 millimeter

CNC Lathe. Features 25” chuck, 6.2” bar capacity, 39.37” turning diameter, Fanuc 21i-TB CNC control, chip conveyor, and steady rest. Includes Yamakawa 4-jaw hydraulic chuck and tailstock. Condition: used. Fanuc 2...

2011 MIGHTY VIPER VT-50AX/4000

• Manufacturer: Mighty Viper
• Model: VT50
• Spindle bore: 234.95 millimeter

Used CNC Lathe. Features 39" swing, 157" machining length, 50 hp power, and max 750 RPM. Equipped with FANUC 21I-TB CNC control, 25” 4-jaw chuck, 9.25" spindle bore, gear headstock, and chip conveyor. 46,200 lbs....

2021 Smart NL6000CL

• Manufacturer: Smart

12 Station Turret Equipped With: Fanuc 0i-TF Control 24″ Samchully Air Chuck w/ 10.8″ Hole 24″ Rear Manual Chuck Hydraulic Steady Rest Prepped Programmable Tailstock 140 PSI Coolant Chip Conveyor All Available Ma...

2015 Okuma LB3000-EXII

• Manufacturer: Okuma
• Model: LB3000 EX II

Equipped With: Okuma OSP-P300L Control Chip Conveyor **Have Inspection Report from Gosiger** The machine is in bad condition The machine would not power on due to 24 volt short, breaker would trip during reset Wa...

2015 Ganesh GT-3080BB

• Manufacturer: Ganesh

Equipped With: Fanuc Oi-TD CNC Control 25″ 3 Jaw Chuck Programmable Tailstock 8-Station Tool Turret Steady rest Chip Conveyor All Available Manuals

Haas SL-10TB CNC Machine

• Manufacturer: Haas
• Model: SL-10TB

Great condition, only used on plastic products. Model: Haas SL-10TB Swing Over Bed: 16.25" Max Cutting Diameter: 10" Max Cutting Length: 14" Loading available / Rigging available / Can arrange freight

Okuma LU-25 Horizontal CNC Lathe Spindle Headstock

• Manufacturer: Okuma

In Good Used Condition. Was removed from an Okuma LU-25 Lathe. 3.2" Actuator bore dia. 9-3/4" Nose OD. 13-1/2"x 19" Base. 19" Height. If this item ships as Flat Rate Freight please see details in Shipping tab