Building Filters
Peter Wolter Microline AC 530-F double-disc fine sanding machine
used
- Manufacturer: Micro Line
Technical specifications Mass: Approx. 260 kg | Operating voltage: 400V + 6% -10% , 3- | Frequency: 50 Hz | Control voltage: 230 / 24 V | Total output: 27.9 kVA | Max. fuse: 100 A gl. | Compressed air: 6 bar | Ai...
Zuchwil, Switzerland
Rösler FKS 06.1 E-SA centrifugal system
used
- Manufacturer: Rösler
Technical data Gross volume (l): 60 l A - Length: 1295 mm A1 - Length with sieving machine: 1797 mm B - Width: 1259 mm C - Height: 1064 mm D - Diameter of work bowl: 496 mm E - Discharge height of screening machi...
Zuchwil, Switzerland
Schneeberger Aries CNC 4 tool grinding machine
used
- Manufacturer: Schneeberger
Technical specifications Grinding head, grinding spindle: / motorized swivel | X axis: Stroke length / 360 | Y-axis: Stroke length / 250 mm | Z-axis: Stroke length / 270 mm | C -axis: Swivel angle / +- 180 ° | E-...
Zuchwil, Switzerland
Haas Super Mini Mill machining center
used
- Manufacturer: Haas
Technical specifications Number of axes: / 3 | X axis: / 406 mm | Y-axis: / 305 mm | Z-axis: / 254 mm | Spindle speed: / 10`000 rpm | Spindle nose: / SK40 | Tool changer, number: / 10 | Table size: / 900 x 310 mm...
Zuchwil, Switzerland
Sodick AQ535L wire EDM machine
used
- Manufacturer: Sodick
Technical specifications Axis travel; x,y: 550 x 350 mm | Axis travel; z: 300 mm | Additional axes; u/v: 80 x 80 mm | Worktable size: 790 x 500 mm | Working tank mass: 1100 x 720 mm | Max. workpiece height: 290 m...
Zuchwil, Switzerland
Mikron VCE600+ machining center
used
- Control: iTNC Heidenhain 530
Technical specifications X axis: 600 mm | Y-axis: 500 mm | Z-axis: 540 mm | Type of drive: Timing belt | Max. number of revolutions: 10`000 rpm | Tool holder: ISO 40 | Tool spindle power: 12 kW | Torque: 96 Nm | ...
Zuchwil, Switzerland
Sodick AQ325L wire EDM machine
used
- Manufacturer: Sodick
- Model: AQ325
Technical specifications Axis travel; x,y: 350 x 250 mm | Axis travel; z: 220 mm | Additional axes; u/v: 80 x 80 mm | Worktable size: 600 x 400 mm | Working tank mass: 895 x 650 mm | Max. workpiece height: 220 mm...
Zuchwil, SwitzerlandCharmilles Technologies Robofil 510 EDM machine
used
- Manufacturer: Agie - Charmilles
- Model: Robofil
Technical specifications Generator type: Isopulse | Max. ambient temperature: 30 ° C | Storage time for software: 100 hours | Maximum charging time: 60 hours | Disk type: 3 ½ '' | Number of storable programs: 112...
Zuchwil, Switzerland
MÜGA H4030 Horizontal machining center
used
- Manufacturer: Müga
Technical specifications Number of revolutions: 15`000 rpm | Storage class: P4 | Pull-in force: 2.5 kN | Spindle center to machine column: 90 - 450 mm | Table to spindle nose: 190 - 570 mm | Length x width: 380 x...
Zuchwil, Switzerland
Brother TC-22A machining center
used
- Manufacturer: Brother
- Model: TC-22A
Technical specifications Number of axes: / 5 | X axis: / 500 mm | Y-axis: / 410 mm | Z-axis: / 610 mm | Spindle speed: / 12`000 rpm | Spindle nose: / BT30 | Tool changer, number: / 26 | Tool change time: / 0.7 se...
Zuchwil, Switzerland
OKK VC-X350 machining center
used
- Manufacturer: OKK
- Control: / Fanuc F31i-B5
Technical specifications X axis: / 600 mm | Y-axis: / 430 mm | Z-axis: / 460 mm | A-axis: / -120° to + 30° | C -axis: / 360 ° | Distance from table surface to spindle nose: / 70 - 530 mm | Table surface: / Ø 350 ...
Zuchwil, Switzerland
HAAS EC-400 Horizontal machining center
used
- Manufacturer: Haas
- Model: EC-400
Technical specifications X axis: / 508 mm | Y-axis: / 508 mm | Z-axis: / 508 mm | Pallet changer, time: / 8 sec. | Pallet size: / 400 x 400 mm | 4th axle, load capacity: / 300 kg | Indexing time, 90°: / 3 sec | S...
Zuchwil, Switzerland
Hermle C800 CNC machining center
used
- Manufacturer: Hermle
- Model: C 800
Technical specifications Number of revolutions: 0- 18`000 rpm | Spindle nose: HSK-A63 | Feed speed: 1-35 m/min | Feed force: 8000 N | X axis: 800 mm | Y-axis: 600 mm | Z-axis: 500 mm | Dimensions of the machine: ...
Zuchwil, Switzerland
Mikron WF 3 DP universal milling machine
used
Technical data Angled table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling spindl...
Zuchwil, Switzerland
YCM NSV102A CNC machining center
used
Technical specifications Spindle speed: 12`000 rpm | Spindle nose: BT40 | X axis: 1020 mm | Y-axis: 600 mm | Z-axis: 600 mm | Distance between spindle nose and worktable: 100-700 mm | Dimensions: 1120 x 650 mm | ...
Zuchwil, Switzerland
