- Trusted Seller
FATA Annealing Line (1995)
used
- Manufacturer: Fata Production Machinery (1995)
Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing...
Chile - Trusted Seller
WEAN UNITED Electrolytic Tinning Line (1967)
used
- Manufacturer: WEAN UNITED
This electrolytic tinning line, manufactured by WEAN UNITED, was commissioned in 1969 and remained operational until 2012. Designed for steel strip tin coating, it employs the Ferrostan process with an alkaline e...
Chile - Trusted Seller
FATA ZN-AL Galvanizing Line (1990)
used
- Manufacturer: FATA
Production Capacity 110.000 MT per year Strip width range 610 – 1220 mm Strip thickness range 0.30 – 0.85 mm Coil weight entry zone Max 18 MT Coil weight delivery zone Max 9 MT Maximum speed 120 m/min ZNAL coatin...
Chile - Trusted Seller
BLISS-CLESIM Temper Mill (1958/1993)
used
- Manufacturer: Bliss
Main Equipment: 1 Uncoiler Entry Bridle (Two Rolls 20”) Anti- crimping roll Work Roll Bending Exit Shear Exit Bridle (Two Rolls 20”) Electrostatic oiler (both sides) Tension reel HGC The Rolling Mill was hibernat...
Chile - Trusted Seller
ROGERS 300 HYD Knife Roll Grinder (1961)
used
- Manufacturer: ROGERS 300 HYD
Longitudinal table travel (stroke): 3000 mm. Cross travel without abrasive wheel: 200 mm. Cross travel with new abrasive wheel: 92 mm.
Chile - Trusted Seller
BLAW-KNOX / CLECIM Tandem Cold Mill
used
- Manufacturer: Blaw-Knox
The original manufacturer of the mill (3-stand) was Blaw-Knox, which was revamped in 1994 by Clecim, to a 5-stand 4Hi configuration for an output of 330,000 tons/year. Flat meter roll Inspection / Survey Reports ...
Chile - Trusted Seller
FARREL K850 60x240IN Roll Grinder (1964/2008)
used
- Manufacturer: Farrel
Dimensions Max. Working Diameter with New Stone: 58" – 1473.20 mm Max. Allowable Workpiece Weight: 80 Tons Abrasive Wheels Drive Head Longitudinal Slide Movement Cooling Devices CNC Control HCC/KP10
Chile - Trusted Seller
CONCAST-SUMITOMO Slab Caster (1992)
used
- Manufacturer: Sumitomo
Slab Caster Main Data • Commissioned in 1992. • It has been mothballed since 2013. Inspection / Survey Reports available upon request.
Chile 
- Iquique, Chile
Valtra Exterior Air Filter
new
- Manufacturer: Valtra
Iquique, Chile
JCB JCB Interior Air Filter for Skid Steer Loader 250
new
- Manufacturer: JCB
Machine type: Skid Steer Loader 250 ; Compatible machine brand: JCB ; Maintenance schedule: 1000 hours,2000 hours,3000 hours,4000 hours,5000 hours,5000 hours,6000 hours
Iquique, Chile- Trusted Seller
2022 SULLAIR 900XHH Compressor
used
- Manufacturer: Sullair
The SULLAIR 900XHH Compressor is a powerful and reliable machine designed to meet the toughest air compression demands in industrial and commercial environments. Featuring a high-performance engine, this compress...
Santiago, Chile 
2000 Chiller Brand COREMA Capacity of 28,000 KCal
used
- Manufacturer: Corema
Chiller Brand COREMA for 28.000 KCal refcs1311 Maker: COREMA | Country: Italy | Capacity: 28,000 KCal | Gas: Freon R22 | Pond capacity water: 110 liters | Temperature range: 7-15°C | Voltage: 380 V | Frequency: 5...
Santiago, Chile
Sidel SBO 4 Blow Molding
used
- Manufacturer: Sidel
- Model: SBO 4
Good condition Sidel SBO 4 Blow Moldings available between 1997 and 2005 years. Located in Chile and other countries. Click request price for more information.
Chile
Tip: Enter manufacturer, model or keyword
