Processing » Elektror

Building Filters

27

Used Elektror Processing

Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fan, radial blower, radial ventilator ELEKTROR, KARL W. MÜLLER 11.3 m³/min 2.0 kPa 2800 rpm 230 / 400 V 3 AC 50 Hz IP54 bolt circle diameter: 112 mm, 4x bore: Ø 11.2 mm used, tested !
$564 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fan, radial blower, radial ventilator ELEKTROR, KARL W. MÜLLER 7.0 m³/min 1.765 kPa ( 180 mmWs ) 2800 rpm 220 / 380 V 3 AC 50 Hz bolt circle diameter: 112 mm, 4x bore: Ø 11,2 mm used, tested !
$423 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fans, radial blowers, radial high-pressure fans with belt drive ELEKTROR Karl W. Müller V-belt pulley ( fan ): Diameter: Ø 80 mm, 2 grooves, groove width: 10 mm Motor : ATB, FLENDER, LOHER Type: A 112M/4/2...
$493 USD
Zschepplin, Germany
Trusted Seller
Elektror Heater Fan Type. RD62 230 / 400V 1.2 Kw mo
- Manufacturer: Elektror
Elektror Heater Fan Type. RD62 230 / 400V 1.2 Kw motor CosØ 0.8 535 / 3.2Amp 2830 Rpm 30m3 / hour. Dimensions: L: 80cm H: 60cm W: 60cm
Harndrup, Denmark
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fan, radial blower, radial ventilator ELEKTROR Karl W. Müller 2850 rpm 220 / 380 V 3 AC 50 Hz IP44 used, tested !
$341 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fans, radial blowers, radial high-pressure fans with belt drive ELEKTROR Karl W. Müller V-belt pulley ( fan ): Diameter: Ø 95 mm V-belt pulley ( motor ): Diameter: Ø 154 mm Motor : SINTEC A3-112M2-21 4,0 k...
$517 USD
Zschepplin, Germany
Trusted Seller
Centrifugal fan
- Manufacturer: Elektror
Flow rate: 27 m³/h | Total pressure differential: 8500 Pa | Engine speed: 5600 rpm | Power: 3,0 kW | Current: 10,9 / 6,3 A | Voltage: 230 / 400 V | Frequency: 95 Hz
Freising, Germany
Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Diam Unit is a bare shaft side channel blower. Unit never commissioned. As new
Sydney, Australia
Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Dia Unit is a skid mounted side channel blower. Driven by approx. a 11 Kw, 415 V electric motor.
Sydney, Australia
ELEKTROR SD-42
- Manufacturer: Elektror
Side channel blower. 3 Phase 1.3kW 220/380V 2800RPM 220mbar 2.8m³/min 1 inch inlet and 2 inch outlet Runs Well
Melbourne, Australia
Elektror Karl W. Müller Side channel blower 443835 SD-4
- Manufacturer: Elektror
Power: 0.75 Kw / 50 Hz / 3.2 / 1.85 A. | Rpm: 2820 | Connections: 220/380 V
Ederveen, Netherlands
Side channel blower Elektror HDN 1|5 (high pressure g 1258085
- Manufacturer: Elektror
Machine infoSide channel blower (high pressure blower) Elektror model HDN 1|5 Used machine ATTENTION: - NOT suitable for chip extraction - only for conveying air at high pressure - e.g. for vacuum Air capacity 5m...
Kempten, Germany

12