- Trusted Seller
Elektror 10 HP 480 Volt Air Knife Blower AK2057
- Manufacturer: Elektror
Watlow Heat Element. SN: D24SX5X. 480 Volt, 036 KW. Filtered Inlet. Stainless Steel Heater. Thermal Couples. Originally Used For Drying Section of Parts Washer. Elektror 10 HP 480 Volt Air Knife Blower AK2057
$3,500 USDSparta, MI - Trusted Seller
2017 ELEKTROR Stainless Steel Radial Ventilator/fan
- Manufacturer: Elektror
Unused Elektror model CFM1 500-D3-LG315-200L stainless steel radial ventilator/fan directly drive by Hoyer 30kW/400V/2960rpm on 50Hz (suitable for 60Hz too) el. motor. Air output 15 840 m3/hour. Max. static press...
Hainesport, NJ - Trusted Seller
2017 ELEKTROR Stainless Steel Radial Ventilator/fan
- Manufacturer: Elektror
Unused Elektror stainless steel radial ventilator/fan directly drive by Hoyer 55kW/400V/2975rpm el. motor. Air output 18 000 m3/hour. Max. static pressure 7000 Pa. Max. temperature 55 deg. C. New 2017. 6 identica...
Hainesport, NJ - Trusted Seller
ELEKTROR RD14 405/574023 BLOWER 3 MOT EN 60034-1 IP 54 W-KI F 60 HZ 3350 MIN M1282
- Manufacturer: Elektror
Tested good Extra Information Brand: ELEKTROR MPN: RD14 Alternative Part Number: 405/574023 HP: .30 KW Voltage: 230/460 VAC Shipping Weight: 35 LBS Shipping Dimensions: 26 (in) × 2...
$250 USDEl Paso, TX - Trusted Seller
ELEKTROR TYP SD BLOWER 7.00 KW 50 HZ 2890 MIN-1 400 V 14.5 A T146125
- Manufacturer: Elektror
50Hz 2890min 400V 14.5A; Extra Information Brand: ELEKTROR MPN: Typ SD HP: 7 1/2 HP Shipping Weight: 290 LBS Shipping Dimensions: 32 (in) × 24 (in) ...
$599 USDEl Paso, TX 
Elektror 10 HP 480 Volt Air Knife Blower AK2057
- Manufacturer: Elektror
Material: Aluminum | Hp: 10 | Volts: 480 | Inlet-in: 8 | Outlet-in: 6 | Oad: 75"L x 36"W x 32"H | Rpm: 3530 | Phase: 3 | Stock location: E15C
$3,500 USDOceanside, CA- Trusted Seller
ELEKTROR SD-8 side channel blower 9m3/min 300 mbar - 5.5 kw
- Manufacturer: Elektror
Motor 5.5 kw 2880 rpm 3 x 380 V Overtall dimensions: 950 x 500 x H. 530 mm | Technical documentation: File 1 | Stock: 1
Wormhout, France Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Dia Unit is a skid mounted side channel blower. Driven by approx. a 11 Kw, 415 V electric motor.
Sydney, AustraliaElektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Diam Unit is a bare shaft side channel blower. Unit never commissioned. As new
Sydney, AustraliaELEKTROR SD-42
- Manufacturer: Elektror
Side channel blower. 3 Phase 1.3kW 220/380V 2800RPM 220mbar 2.8m³/min 1 inch inlet and 2 inch outlet Runs Well
Melbourne, Australia
Elektror Karl W. Müller Side channel blower 443835 SD-4
- Manufacturer: Elektror
Power: 0.75 Kw / 50 Hz / 3.2 / 1.85 A. | Rpm: 2820 | Connections: 220/380 V
Ederveen, Netherlands
Tip: Enter manufacturer, model or keyword
