Test, Lab, Medical equipment » Electrical Test Instruments

Building Filters

110

Used operator interface panels

  • Trusted Seller
    Hewlett Packard E3631A

    Hewlett Packard E3631A

    • Manufacturer: HP
    • Model: E3631A

    25 Volt / 5 Amp / 80 W Triple Output DC Power Supply The E3631A DC Power supply is a dual range single output power supply of 6 V @ 5 A or 25 V @ 1 A with CV or CC operation with overvoltage and overcurrent prote...

    Cary, NC
  • Trusted Seller
    Behlman ACP-750

    Behlman ACP-750

    • Manufacturer: Behlman

    750 VA AC Power Source / Frequency Converter The Behlman ACP-750 AC Power Source Operates from 45 Hz to 2 kHz and provides up to 1000 VA of single phase output power at up to 135 Volts. The ACP-750 internal oscil...

    Cary, NC
  • Trusted Seller
    Instek PSH-3610

    Instek PSH-3610

    • Manufacturer: GW Instek
    • Model: PSH-3610

    DC Power Supply, 36 V, 10 A, 360 W, Programmable The PSH-Series are single output, 360 to 1080W, programmable switching DC power supply. OVP, OCP, and OTP protect PSH-Series and loads from unexpected conditions. ...

    Cary, NC
  • Trusted Seller
    Modutec 20-900134

    Modutec 20-900134

    • Manufacturer: Modutec

    The Modutec 20-900134 PANEL METER DCA is a dependable and adaptable device utilized for the measurement and presentation of direct current amperage. It is specifically designed to provide precise and accurate rea...

    Cary, NC
  • Trusted Seller
    ILX LDP-3811

    ILX LDP-3811

    • Manufacturer: ILX

    Precision Pulsed Laser Diode Current Source Specifically designed to drive low power laser diodes, the LDP-3811 is a microprocessor-controlled current source with two operational modes, CW or pulsed. Offering a d...

    Cary, NC
  • Trusted Seller
    California Instruments 848TCM

    California Instruments 848TCM

    • Manufacturer: California Instruments
    • Model: 848TCM

    45 Hz to 10 kHz Single and Multi Phase Control Module The California Instruments 848TCM AC Power Controller Programmable Plug-In is a microprocessor controlled plug-in module which interfaces to the IEEE-488 GPIB...

    Cary, NC
  • Trusted Seller
    TDK-Lambda GENH6-100

    TDK-Lambda GENH6-100

    • Manufacturer: TDK - Lambda

    6 Volt / 100 Amp / 600 W DC Power Supply The TDK-Lambda GENH6-100 is a 6 Volt / 100 Amp DC Power Supply. TDK-Lambda GENH6-100 Features: Highest power density 2400 W available in 1U size Output voltage up to 600 V...

    Cary, NC
  • Trusted Seller
    TDK-Lambda GENH30-25

    TDK-Lambda GENH30-25

    • Manufacturer: TDK - Lambda
    • Model: GENH30-25

    30 Volt / 25 Amp / 750 W DC Power Supply The TDK-Lambda GENH30-25 is a 30 Volt / 25 Amp DC Power Supply. TDK-Lambda GENH30-25 Features: Highest power density 2400 W available in 1U size Output voltage up to 600 V...

    Cary, NC
  • Trusted Seller
    Hart Scientific 1502A

    Hart Scientific 1502A

    • Manufacturer: Hart Scientific

    Precision PRT Temperature Indicator The 1502A Tweener features accuracy up to 0.006 Degrees C. In addition, the 1502A reads both 100-ohm and 25-ohm probes, has a resolution of 0.001 Degrees C across its entire ra...

    Cary, NC
  • Trusted Seller
    Kikusui PLZ153W

    Kikusui PLZ153W

    • Manufacturer: Kikusui
    • Model: PLZ153W

    120 Volt / 30 Amp / 150 Watt System Electronic Load The Kikusui PLZ153W is a programmable, microprocessor-based, 150 Watt Electronic Load. The PLZ153W is rated for up to 120 V and 30 A. It features four operating...

    Cary, NC
  • Trusted Seller
    Instek PSS-3203

    Instek PSS-3203

    • Manufacturer: GW Instek
    • Model: PSS-3203

    Instek PSS-3203 96W, Single Output, Programmable Linear D.C. Power Supply - PSS Series The PSS Series is single output, 96 or 100W, programmable linear DC power supply. OVP, OCP, and OTP protect PSS and loads fro...

    Cary, NC
  • Trusted Seller
    Instek PSS-2005

    Instek PSS-2005

    • Manufacturer: GW Instek
    • Model: PSS-2005

    Instek PSS-2005 100W, Single Output, Programmable Linear D.C. Power Supply - PSS Series The PSS Series is single output, 96 or 100W, programmable linear DC power supply. OVP, OCP, and OTP protect PSS and loads fr...

    Cary, NC
  • Trusted Seller
    Associated Power Technologies 7004

    Associated Power Technologies 7004

    • Manufacturer: Associated Power Technologies

    300 V / 4.6 A / 400 VA Automated AC Power Source The Associated Power Technologies 7004 is a 300 V / 4.6 A / 400 VA Automated AC Power Source. APT 7000 Series automated AC power sources are ideal for advanced app...

    Cary, NC
  • Trusted Seller
    Solartron 1286

    Solartron 1286

    • Manufacturer: Solartron
    • Model: 1286

    DC to 1 MHz Potentiostat / Electrochemical Interface The 1286 can be used either as a potentiostat or galvanostat, with selectable control loop bandwidth to ensure stable operation for various types of cell. Full...

    Cary, NC
  • Trusted Seller
    HP N5767A

    HP N5767A

    • Manufacturer: HP

    60 Volt / 25 Amp / 1.5 kW System DC Power Supply The N5767A is a high density DC Power Supply for general system applications. The N5767A provides outputs up to 60 V at currents up to 25 A. Maximum output is rate...

    Cary, NC
23456

Overview

Electrical test instruments are essential tools used to test, measure, and diagnose electrical systems and components. These devices are crucial for ensuring the safety, efficiency, and reliability of electrical installations, whether in residential, commercial, or industrial settings. Common types include multimeters, oscilloscopes, and insulation testers.

FAQ

What should I look for when buying used electrical test instruments?

Check the calibration status, overall condition, and whether all necessary accessories are included. It’s also important to verify the instrument's accuracy and functionality.

How can I safely ship electrical test instruments?

Use proper packaging with adequate cushioning to protect the instruments from shocks and vibrations. It's advisable to use a shipping service experienced in handling delicate electronic equipment.

What is the maintenance procedure for electrical test instruments?

Regularly calibrate the instruments to ensure accuracy, clean them to remove dust and debris, and store them in a protective case when not in use. Follow the manufacturer’s guidelines for specific maintenance tasks.