Test, Lab, Medical equipment » Electrical Test Instruments » Italy

Building Filters

8

Used controllers in Italy

Trusted Seller
HP438A Dual Sensor Power Meter
The HP 438A power meter is a dual-channel power meter designed specifically for ATE systems. The compact front panel saves critical rack space, while the dual-channel design allows simple and accurate measurement...
Poggibonsi, Italy
ICS 488-LPCI
- Manufacturer: ICS
GPIB PC controller board for PC with PCI bus with transfer rate > 1.5 Mb/s. Includes ICS and National Instruments 488.2 drivers and the GPIBKeyboard Controller program. Adds GPIB Controller capability to any PC w...
$1,227 USD
Rivalta di Torino, Italy
ICS 4865B
- Manufacturer: ICS
LAN / GPIB Interface Module: enables connection of recent instruments equipped with LAN interface on GPIB bus. Adds a GPIB Interface to VXI-11 compatible Ethernet instruments. Transparent data transfer handles AS...
$1,412 USD
Rivalta di Torino, Italy
CHAUVIN ARNOUX C.A 6113
- Manufacturer: Chauvin Arnoux
- Model: CA 6113
Instrument controller electrical installations, power and harmonics. Continuity: 200 mA (at 39.99 Ω) and 12 mA (at 39.99 and 399.9 Ω) Resistance: measurements up to 400 kΩ Short-circuit current: < 3 mA Insulation...
$2,268 USD
Rivalta di Torino, Italy
CHAUVIN ARNOUX C.A 6116N
- Manufacturer: Chauvin Arnoux
Instrument controller electrical installations, power and harmonics. Continuity: 200 mA (at 39.99 Ω) and 12 mA (at 39.99 and 399.9 Ω) Resistance: measurements up to 400 kΩ Short-circuit current: < 3 mA Insulation...
$2,407 USD
Rivalta di Torino, Italy
CHAUVIN ARNOUX C.A 6117
- Manufacturer: Chauvin Arnoux
- Model: CA 6117
Instrument controller electrical installations, power and harmonics. Continuity: 200 mA (at 39.99 Ω) and 12 mA (at 39.99 and 399.9 Ω) Resistance: measurements up to 400 kΩ Short-circuit current: < 3 mA Insulation...
$2,650 USD
Rivalta di Torino, Italy
GOODWILL GPT-9801
- Manufacturer: GOODWILL
AC stiffness meter up to 200 VA. Output voltage range: from 0.100 to 5,000 kV AC Output voltage resolution: 2 V/step Output voltage accuracy: ±1% of setting +5 V (no load) Maximum rated load: 200 VA (5 kV / 40 mA...
$1,568 USD
Rivalta di Torino, Italy
CHAUVIN ARNOUX FTV400
- Manufacturer: Chauvin Arnoux
Test device for automatic verification of the interface protection system (SPI) of low- and medium-voltage photovoltaic systems with power more than 6 kW, according to AEEG Resolution 84/2012/R/EEL, Annex A.70 Te...
$16,450 USD
Rivalta di Torino, Italy

Overview

Electrical test instruments are essential tools used to test, measure, and diagnose electrical systems and components. These devices are crucial for ensuring the safety, efficiency, and reliability of electrical installations, whether in residential, commercial, or industrial settings. Common types include multimeters, oscilloscopes, and insulation testers.

FAQ

What should I look for when buying used electrical test instruments?

Check the calibration status, overall condition, and whether all necessary accessories are included. It’s also important to verify the instrument's accuracy and functionality.

How can I safely ship electrical test instruments?

Use proper packaging with adequate cushioning to protect the instruments from shocks and vibrations. It's advisable to use a shipping service experienced in handling delicate electronic equipment.

What is the maintenance procedure for electrical test instruments?

Regularly calibrate the instruments to ensure accuracy, clean them to remove dust and debris, and store them in a protective case when not in use. Follow the manufacturer’s guidelines for specific maintenance tasks.