Test, Lab, Medical equipment » Electrical Test Instruments » China

Search By Province

Building Filters

7

Used rf systems in China

  • NRX Absorption RF Power Meter

    NRX Absorption RF Power Meter Mainframe

    • Manufacturer: 德国罗德与施瓦茨/R&S

    Introduction: The NRX can be configured with up to four measurement channels and a wide range of power sensors, making it possible for a single power meter to support both absorption and through-type power sensor...

    Beijing, China
  • NRP2 Absorption Power Meter (discontinued)

    NRP2 Absorption Power Meter (discontinued)

    • Manufacturer: 德国罗德与施瓦茨/R&S

    Introduction: Measurement power -67dBm ~ +45dBm, frequency DC ~ +110GHz. NRP2 absorption RF power meter accurately measures RF power. Simple digital and graphical display of measured values, and intuitive operati...

    Beijing, China
  • NRT2 Power Reflectometer and NRT-Zxx

    NRT2 Power Reflectometer and NRT-Zxx Directional Power Sensors

    • Manufacturer: 德国罗德与施瓦茨/R&S

    Introduction: Directional power sensors measure forward and reverse power under operating conditions. Forward and reverse power measurements are required when installing, maintaining, and monitoring transmitters,...

    Beijing, China
  • PSM3000/PSM4000/PSM5000 Series Power Meters

    PSM3000/PSM4000/PSM5000 Series Power Meters

    • Manufacturer: 美国泰克/Tektronix

    Introduction: The main parameters of this series of instruments are bandwidth from 10MHz to 20GHz, dynamic range from -60 dBm to +20 dBm; uncertainty as low as 2.6%; readout speed up to 2000 times per second. The...

    Beijing, China
  • NRPM Over-the-Air (OTA) Power Measurement

    NRPM Over-the-Air (OTA) Power Measurement Solution

    • Manufacturer: 德国罗德与施瓦茨/R&S

    Introduction: NRPM OTA power measurement solution is dedicated to calibrating transmit antenna output power and performing OTA testing of beamforming functions. Applicable to WLAN IEEE802.11ad, IEEE802.11ay and 5...

    Beijing, China
  • no-image_en.png

    RFCI61000-6 RF Conducted Immunity Test System

      The RFCI61000-6 series RF Conducted Immunity Test System is used to simulate conducted interference signals induced by radio frequency (RF) fields. These signals are injected into the power and signal lines of th...

      Shanghai, China
    • no-image_en.png

      LSBCI-40 Bulk Current Injection Test System

        The LSBCI-40 Bulk Current Injection (BCI) test system is an electromagnetic immunity tester designed by LISUN specifically for the automotive electronics, rail transit, and industrial control sectors. The functio...

        Shanghai, China

      Overview

      Electrical test instruments are essential tools used to test, measure, and diagnose electrical systems and components. These devices are crucial for ensuring the safety, efficiency, and reliability of electrical installations, whether in residential, commercial, or industrial settings. Common types include multimeters, oscilloscopes, and insulation testers.

      FAQ

      What should I look for when buying used electrical test instruments?

      Check the calibration status, overall condition, and whether all necessary accessories are included. It’s also important to verify the instrument's accuracy and functionality.

      How can I safely ship electrical test instruments?

      Use proper packaging with adequate cushioning to protect the instruments from shocks and vibrations. It's advisable to use a shipping service experienced in handling delicate electronic equipment.

      What is the maintenance procedure for electrical test instruments?

      Regularly calibrate the instruments to ensure accuracy, clean them to remove dust and debris, and store them in a protective case when not in use. Follow the manufacturer’s guidelines for specific maintenance tasks.