Used Filter Presses

1.6 Sq Meter Rosenmund Nutsche Filter, Hastelloy C276

• used

• Manufacturer: Rosenmund

1.6 Sq Meter Rosenmund Nutsche Filter, Hastelloy C276 Used Rosenmund agitated nutche filter, model RND1.6-288-82, 1.6 sq. meter surface area, 960 liters, Hastelloy C276 product contact surfaces, rated 50 PSI and ...

Chemap AG (Funda) Filter, Model R-10, S/S

• used

• Manufacturer: Chemap AG

Chemap AG (Funda) Filter, Model R-10, S/S Used Model R-10 Chemap AG (Funda) Filter, 10 sq. meter, 107 sq. ft. effective area, stainless steel construction, with (22) 800 MM plates, 30 MM plate spacing, 2 1/2" fil...

Sparkler Filter, Model 18D8, 12.88 SF, 1.552 CF, S/S

• used

• Manufacturer: Sparkler

Sparkler Filter, Model 18D8, 12.88 SF, 1.552 CF, S/S Used Sparkler Filter, Model 18D8, stainless steel construction, rated 60 PSI internal, (8) 18" diameter plates, 12.88 sq. ft. surface area, 1.552 cu. ft. of ca...

Stainless Steel So~clean Bag Filter

• used

• Manufacturer: j&m industrial

Max design pressure is 150 PSI @ 450°f. 2"ø flanged inlet and outlet. Overall height = 23".

Filter Press, 958 Sq.Ft. Filtration Area, Polypropylene Plates, Manufactured by Pacific Press Co. - IPP# 238423

• used

• Manufacturer: Pacific Press Co

Side bar design with semi automatic plate shifter four eye discharge washing plates with ¼” recess Press can be upgraded to 100 cu ft cake capacity and 2079 sq. ft. filtration area with additional plates Single h...

Clearsep Technologies 316L Stainless Steel Candle Filter

• used

• Manufacturer: Clearsep Technologies

Serial No USA 1001. Material Of Construction: 316L stainless steel (shell & candle filters) For clarification of various liquids with low solids content. Vertically arranged, slotted candle filter elements with r...

2" Rosedale Single Cartridge Pressure Filter

• used

• Manufacturer: Rosedale

ITEM #: 03442 Used 2" Rosedale Single Cartridge Pressure Filter Unable to read mfg. Label. Tank is 8-1/2" dia. X 39" high, overall height is 50". Connections: 2"Ø 150# ansi flanged. Stainless steel constructio...

Clearsep Technologies 316L Stainless Steel Candle Filter

• used

• Manufacturer: Clearsep Technologies (I) Pvt Ltd.

ITEM #: 20255 Used Clearsep Technologies 316L Stainless Steel Candle Filter Serial No USA 1001.Material Of Construction: 316L stainless steel (shell & candle filters)For clarification of various liquids with low ...

Alsop For 12 Inch Round Plate Filter Press #12782

• used

• Manufacturer: Alsop For 12 Inch Round Plate

Alsop filter press skeleton for 12" round plates, w/eco pulsafeeder lobe type pump, no drive on portable base # 0010pf (xp start/stop box)

JWI 630G32-10/17-3/5DA Hydraulic Filter Press – Industrial Sludge Dewatering ...

• used

• Manufacturer: JWI

“WAS PREVIOUSLY USED FOR COSMETICS. OVERALL, GOOD CONDITION. FILTERS STILL HAVE SOME COSMETICS ON THEM AND CAN BE PRESSURE RINSED.” JWI 630G32-10/17-3/5DA Hydraulic Filter Press – Industrial Sludge Dewatering Sys...

Filter Press, 88.16 Sq.Ft. filtration area, 316L Stainless Steel, Manufactured by Star Filter Press - IPP# 247070

• used

• Manufacturer: Star Filter Press

SIEMENS J-PRESS Water Filtration System

• used

• Manufacturer: Siemens
• Model: J-Press

Equipment # 1693 Highlights: Number of Filter Plates 28 20 additional clothes for replacement 1 1/2" Wilden AOD pump Custom Siemens Controller. 2 Additional Used Pumps Included 2500 flat bottom tank for Clean/Rec...

Polypropylene Schenk Filter Press - IPP# 231224

• used

• Manufacturer: Schenck

stainless steel recessed plate and polypropylene frame filter press (2) eye top and bottom feed/discharge stainless steel skeleton, hydraulic press mechanism with built on powerpack and manual controls

Polypropylene Perrin Filter Press - IPP# 228111

• used

• Manufacturer: Perrin

123 chambers. Plates are made from non-reinforced, molded, pressure-resistant polypropylene. Cake thickness is 32 mm. Filter frame is heavy duty construction from A-36 steel with Stainless steel covered side rail...

Polypropylene Netzsch Filter Press - IPP# 221712

• used

• Manufacturer: Netzsch

Kom #740.213 (25) membrane plates, (24) recessed plates, (2) end plates, 20 mm deep recess, (4) corner 50mm discharge, 100mm center feed, cake thickness: 35 mm, single screw press mechanism driven by a hydraulic ...