Processing » Edge Polishers

Building Filters

266

Used processing

  • Trusted Seller
    Belt Edge Polishing Machine LP80/210

    Belt Edge Polishing Machine LP80/210

    • Manufacturer: Gobid

    Automatic belt polishing machine type LP 80/210 (serial no. 00/46)

    Milan, Italy
  • Trusted Seller
    SIMEC LEVI P

    SIMEC LEVI P

    • Manufacturer: Simec

    Material entry: from right to left | Number of calibrators: 1 | Number of polishing mandrels: 5 | Max working width: 600 mm | Equipped with: translating bridge

    Domegliara, Italy
  • Trusted Seller
    Unknown MNP

    Unknown MNP

    • Manufacturer: ZED Macchine Srl

    Base: in cast iron | Basis: in cast iron | Column: in tempered steel | Spindle lifting cylinder stroke: 150 mm | Maximum radius: 2,000 mm | Lift stroke: 300 mm | Lifting stroke: 300 mm | Abrasive plate: diam. 27...

    Domegliara, Italy
  • Trusted Seller
    2002 CMG TAURUS 100

    2002 CMG TAURUS 100

    • Manufacturer: CMG

    Material entry: left | Number of polishing mandrels: 8 | Number of polishing spindles: 8 | Number of bevelers: 4

    Domegliara, Italy
  • CMG Macchine Taurus

    CMG Macchine Taurus

    • Manufacturer: Taurus

    The Taurus edge polishing machine is composed of the best materials on the market: 22 mm steel bench, covered with rectified stainless steel plates; all the machine parts which are in contact with water are in st...

    Villafranca di Verona, Italy
  • CMG Macchine Taurus 565R

    CMG Macchine Taurus 565R

    • Manufacturer: Taurus

    Behind the Taurus 565 edge polishing machine there is an advanced technological study that ranges from the realization of different projects, from a simple staircase step to a kitchen countertop. Technical featur...

    Villafranca di Verona, Italy
  • CMG Macchine Dynamic

    CMG Macchine Dynamic

    • Manufacturer: CMG Macchine

    The new automatic edge-polisher Dynamic is designed to achieve high production and excellent polishing quality. A robust machine that allows different types of automatic simultaneous processing such as calibratio...

    Villafranca di Verona, Italy
  • CMG Macchine Flotter 520 /

    CMG Macchine Flotter 520 / 540 / 540 PLUS

    • Manufacturer: CMG Macchine

    The edge-polisher Flotter 520 is suitable for polishing and profiling the edges on composite stones. A small machine that is simple to use and maintain. The electronic equipment sets the partial polishing, the on...

    Villafranca di Verona, Italy
  • Levigatrice EASY T GECAM

    Levigatrice EASY T GECAM

    • Manufacturer: Gecam

    Levigatrice a doppio utensile adatta a svariati processi di lavorazione dei metalli, smerigliatura, sbavatura, arrotondamento bordi e lucidatura. Dotata di una testa montata su braccio oscillante, inclinabile di ...

    Parma, Italy
  • Levigatrice GT06 GECAM

    Levigatrice GT06 GECAM

    • Manufacturer: Gecam

    Levigatrice trasversale per superfici metalliche per la sbavatura superficiale ed arrotondamento degli spigoli, a 6 gruppi di lavoro superiori ed inferiori per una lavorazione contemporanea su entrambi i lati. Ba...

    Parma, Italy
  • CMG Macchine V-Groove

    CMG Macchine V-Groove

    • Manufacturer: CMG Macchine

    The V-Groove edge polishing machine makes double miter-cuts (45°) in a single pass, this way the two parts perfectly glued together in 90°. The miter-cutting is performed with the polishing side of the working pi...

    Villafranca di Verona, Italy
  • Satinatrice a umido GE30 wet

    Satinatrice a umido GE30 wet GECAM Levigatrice a umido GE30 WET

    • Manufacturer: Gecam

    Satinatrice a umido per metalli GE30 WET, a nastro con spruzzatori d’acqua per superfici metalliche soggette a deformazione da calore. Dotata di banco di avanzamento intero e rigido con tappeto super-grip per per...

    Parma, Italy
  • Levigatrice GE30 GECAM

    Levigatrice GE30 GECAM

    • Manufacturer: Gecam

    Levigatrice a nastro per superfici metalliche con larghezza utile di lavoro max 300 mm con banco di avanzamento unico e mobile con salita e discesa grazie a volantino, a doppia velocità di avanzamento fino a 10 m...

    Parma, Italy
  • Linea smerigliatura barre di rame

    Linea smerigliatura barre di rame GECAM

    • Manufacturer: Gecam

    Macchina progettata per la pulitura di barre di rame e acciaio su entrambi i lati, dotata di tre teste superiori e tre teste inferiori, con nastro abrasivo per sbavare e spazzole scotch brite per la finitura. Sca...

    Parma, Italy
  • Smerigliatrice automatica per spigoli superiori

    Smerigliatrice automatica per spigoli superiori GECAM

    • Manufacturer: Gecam

    Smerigliatrice automatica per la pulitura di saldature su spigoli superiori di scatole a 90°. Dotata di ampio basamento per l’appoggio del pezzo con sistema pneumatico di bloccaggio dello stesso può lavorare bord...

    Parma, Italy
45678

Overview

Edge polishers are specialized machines used in the stone industry to polish and finish the edges of marble, granite, and other types of stones. These machines ensure a smooth, polished finish and can handle various edge profiles, making them essential for countertop, flooring, and decorative stone applications.

FAQ

What should I consider when buying a used edge polisher?

Check the machine's operational hours, maintenance history, and overall condition. Ensure that the machine can handle the types of stones and edge profiles you work with.

How do I ensure the edge polisher is shipped safely to my location?

Use a reputable machinery transport service. Make sure the machine is securely packed and protected to prevent any damage during transit.

What is the maintenance schedule for an edge polisher?

Regular maintenance includes checking and replacing worn-out polishing pads, cleaning the water supply system, and lubricating moving parts. Refer to the manufacturer’s manual for specific maintenance intervals.