Used Processing in Opole, Poland

Furnace, blowing and extraction fans

Fans of various parameters, in working order.

Urbas 4 MW furnace

Furnace with heating capacity of 4 MW Furnaces for biomass, bark, woodchip, sawdust. Moisture content of the material up to 60% Furnace available from July-August 2025

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Belt conveyor with bevel for grain, etc.

Grain conveyor Level length 1.20 m Bevel length 3.30 m Level length at the top 1 m Belt width 39 cm Total width 65 cm Chute 25 x 15 cm Discharge at a height of 3.20 m

Scraper, redler for sawdust, woodchips, etc. 58

• Manufacturer: ats maszyny drzewne asoltys kbanas sc

Length 7, 50 m Length of takers 28 cm Dimensions of the channels 29 x 18 cm

Conveyor belt, conveyor belt TA 253

Length 22 m Tape width 30 cm New tape Total width 40 cm Motor 1,7 KW

Furnace for drying sawdust and wood chips

Cells

Cells (2 pcs.) Inlet 27 x 14 cm Engine 1.2/0.81 KW

Tank, expansion tank made of acid-resistant sheet metal

Height: 3 m Diameter: 2 m Total height: 4.20 m Tank as shown in the photos

Ash conveyor, waste removal from the Ż 35 furnace

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Conveyor belt, driven, in bevel TA 259

Length 8.00 m Width of the tape 50 cm Total width 90 cm Belt conveyor in a slant, rising to about 3.00 m

Furnace, sawdust boiler with a stoker

Furnace with heating power of 600 KW Low-temperature furnace, automatic system for burning biomass Type INNOVEX - BOREX - AT Date of production 2006 Technical and operation documentation Nolting scraper The whole...

Tank for compressor 750 l

Tank with a capacity of 750 l Pressure 10 bar - height 170 cm - diameter 80 cm

Tank for compressor 500 l

Tank with a capacity of 500 l Pressure 16 bar Year 2002 - height 200 cm - diameter 60 cm