Used Machine Tools in Nuevo León, Mexico

KVTC 3270/40

Large working capacity of up to 126″ x 28″ x 24″ travels and 138″ x 24″ table. Powerful 25HP spindle motor with up to 12,000 RPM with spindle cooling system. Fanuc AICC-NANO high speed contour control. Fanuc "i" ...

S 2000

15 HP Peak Servo Motor. Meehanite casting for increased rigidity. Hardened and ground square shapes on the Y and Z axes. Hardened and ground table and dovetail shapes. Precision ball screws on the X, Y, and Z axe...

KTM 5VKF-E

Motor power 5 HP, 50 - 4500 RPM variable speed with frequency inverter. Digital display for real time RPM readout and spindle load indicator with green yellow and red bar for operator to realize how much load the...

KTM 4VKF-E

Motor power 3 HP, 50 - 4500 RPM variable speed with frequency inverter. Digital display for real time RPM readout and spindle load indicator with green yellow and red bar for operator to realize how much load the...

JHU 3506H/NC

Nitride hardened, super finished power. Variable speed workhead rotates 90° CCW and 30° CW. Rapid feed and retraction of the wheel head allows for faster setup and verification of grinding dimensions. Hydraulical...

KVTC 2260/50

Large working capacity of up to 126″ x 28″ x 24″ travels and 138″ x 24″ table. Powerful 25HP spindle motor with up to 12,000 RPM with spindle cooling system. Fanuc AICC-NANO high speed contour control. Fanuc "i" ...

KVTC 2260/40

Large working capacity of up to 126″ x 28″ x 24″ travels and 138″ x 24″ table. Powerful 25HP spindle motor with up to 12,000 RPM with spindle cooling system. Fanuc AICC-NANO high speed contour control. Fanuc "i" ...

KHV 400

Characteristics: KHV 400 | X-axis displacement (h/v): 19.7″ | Y-axis displacement (h/v): 19.7″ | Z-axis displacement (h/v): 17.8″ | Vertical spindle center to column: 25.7" | Vertical spindle nose to table: 4.9"...

S 1500

10 HP AC spindle motor. Meehanite GB300 cast iron for superior rigidity. Hardened and ground square Y and Z axis forms. Hardened and ground table and dovetail forms. Precision spindles in X, Y and Z axes. Ultra-p...

KVTC 3270/50

Large working capacity of up to 126″ x 28″ x 24″ travels and 138″ x 24″ table. Powerful 25HP spindle motor with up to 12,000 RPM with spindle cooling system. Fanuc AICC-NANO high speed contour control. Fanuc "i" ...

KTM 5AVK-F

Hardened and ground table 13″ x 59″. Super precision oversized recirculating ball recirculating ball screws with telescoping stainless steel covers on X and Y axes, driven by direct current servo motor. Ground mi...

KTM 3VKF

Motor power 3 HP, 50 - 4500 RPM variable speed by means of a frequency inverter, which allows us to go from 0 to maximum revolutions in 3 seconds. 10″ x 50″ hardened and ground table. T-slots. Precision hardened ...

KTM 3S

Motor power 3 HP, 16 speed with belt shift. 9″ x 42″ hardened and ground table. T-slots. Precision hardened and ground precision spindles with double nut for wear compensation. Meehanite casting with inter-built ...

JHU 35100H/NC

Nitride hardened, super finished power. Variable speed workhead rotates 90° CCW and 30° CW. Rapid feed and retraction of the wheel head allows for faster setup and verification of grinding dimensions. Hydraulical...

TLC-125 BUFFALO BRAND HAND HELD PILLAR DRILL

• Manufacturer: Buffalo

BUFFALO (USA) Manual column drill No.16, MT3 cone, table 24 "x 26.5", 5 Vel (400 - 3000 RPM), maximum height under hmta 22 ", 3/4 HP motor, s / n. 5410072