Used Processing in Ontario, Canada

A80 Processing

Machine adapted to international safety and hygienic rules. Practically maintenance free. The A80 and A150 models are kneading machines for small volume productions in which good blending and good kneading are es...

2001 8" 1480psi Sweet Vertical Separator

• Manufacturer: FLODRIP

PACKAGE, SEPARATOR, FLODRIP 8" 1480 PSI Package id: 62048990 | Packager: MARDAL INDUSTRIES | Service type: Sweet | Pasc condition rating: B | Skidded: Yes | Connection status: Connected | Vessel only: No | Diamet...

1/4″ Black Tubing

• Manufacturer: Seal-Rite

1/4″ Black Tubing – NOTE: This hose is sold per foot. (Spray Bar Kit Comes with 50′)

A&M Process SRB150T

• Manufacturer: A&M Process

316 stainless steel. The mixer is 36" wide x 30" long x 36" deep. Approximately 15 cubic foot working capacity. The lid lifts up and down with an air cylinder on the back. It has a 2.5" outside diameter sani clam...

2021 Schenck Process RT FILTER 72RT32

• Manufacturer: Schenck

• MEDIA AREA: 299.5 SQ FT • AIR-TO-MEDIA RATIO: 6.7 : 1 @ 2000 CFM • VACUUM RATING: 17″ HG • CONSTRUCTION: CARBON STEEL (PRODUCT CONTACT & CLEAN AIR PLENUM) • COATING: FOOD-GRADE EPOXY ON CONTACT AREAS • VALVES: ...

2019 Voorwood L217NH double sided edge foiler

• Manufacturer: Voorwood

The Voorwood L217 Shaper Foiler is built to profile, sand, and apply transfer-finishing foil to both edges of MDF parts in a single pass. It’s capable of churning out over 27,000 lineal feet (around 8,200 meters)...

Used American Process Systems 4 Cu Ft Double Ribbon Blender, Model DRB-4

• Manufacturer: Americal Process Systems

1 Used American Process Systems 4 Cu Ft Double Ribbon Blender, Model DRB-4. The blender is all stainless steel construction and was built in 1994. The heavy duty frame is steel and painted in “steel – it”. Blende...

UNUSED ACG STAINLESS STEEL FLUID BED PROCESSOR, MODEL FBC 125 XꞏONE

• Manufacturer: ACG

Technical Specifications Pressure shock resistance (machine tower): 12 bar Design temperature fresh air intake: -10°C Inlet air temperature (Entry machine tower): 80°C Process air flow volume: 1500 m3/h Min....

WULFTEC SML-150

• Manufacturer: Wulftec

• PRODUCTION RATE: UP TO 55 LOADS/HOUR
 • MACHINE DIMENSIONS: 118” L X 59” W X 86 3/8” H • LOAD SIZE: 50” X 50” X 80”
 • LOAD WEIGHT: 4,000 LBS
 • ELECTRICAL: 120V/1PH/60HZ, 15A
 • TURNTABLE: 58” DIA. STEEL PLATE...