Used Processing in Colorado, USA

STEAM INJECTION SHELL

33 SQ. FT. SPIRAL-TUBE : HEAT EXCHANGER. TUBE: 77" 33 SQ. FT. SPIRAL-TUBE HEAT EXCHANGER

PALL SANITARY AIR AND GAS FILTER

• Manufacturer: Pall

PALL SANITARY AIR AND GAS FILTER Tri-clamp inlet and outlet: 2" | Outer dia. tube: 3.75" | Overall length: 32.75"

GAULIN MF18-5PS

• Manufacturer: APV - Gaulin

GAULIN MF18-5PS HOMOGENIZER AVAILABLE TO PART-OUT OBSOLETE: AVAILABLE FOR PARTS ONLY OR IF YOU ALREADY HAVE ONE

ALFA LAVAL (TRICLOVER) 2" SANITARY DIVERT VALVE

• Manufacturer: Alfa-Laval
• Model: M10

DIVERT VALVE, AIR TO CLOSE, TEFLON SEATS

RECIRCULATING CHILLER

• Manufacturer: Lauda

LAUDA WK 1200 RECIRCULATING CHILLER. 23 LITER CAPACITY, 40 LITER/MIN FLOW RATE, 0C TO +40C TEMPERATURE RANGE, 115 VOLTS

ALFA LAVAL PLATE HEAT EXCHANGER

• Manufacturer: Alfa-Laval

ALFA LAVAL PLATE HEAT EXCHANGER. TYPE : ALFANOVA 76-120H. 100% STAINLESS FUSION-BONDED PLATES. 120 SQ. FT. SURFACE AREA, MALE NPT CONNECTIONS.

Chromalox PFCW-600B-350XX

• Manufacturer: Chromalox

CHROMALOX SYSTEM FEATURING FPX-3522 SUPPLY PUMP WITH 7.5 HP MOTOR, CHROMALOX 175W IMMERSION HEATER, 200 GALLON INSULATED TANK, INSULATED PLUMBING, GATE VALVES, PRESSURIZED CONTROL PANEL. DESIGN CAPACITY : 200 GPM...

BENNET FORGE WORKS 10 BARREL GAS FIRED KETTLE

• Manufacturer: BENNET FORGE WORKS

Forgeworks MODEL 10KL SERIAL 67151410K1, EQUIPPED WITH 300,000 BTU/Hr ECONOMITE BURNER, 8"" CONNECTION FOR VAPOR STACK AND 8"" CONNECTION FOR FUME STACK, 2 AVAILABLE, MATCHED MASH TUN (T-1656) FOR SMALL BREWERY A...

8.5 GALLON INSULATED TANK

8.5 GALLON INSULATED STORAGE TANK. HEIGHT 42", DIAMETER 17".

10 GALLON REACTOR TANK

• Manufacturer: ALLEGHENY BRADFORD CORP

10 GALLON REACTOR TANK. MANUFACTURER ALLEGHENY BRADFORD CORP. SERIAL 11904-01. , CYLINDRICAL, DOMED TOP , DISH BOTTOM , JACKET, 304 SS EXTERIOR, 1.5" TC DIAPHRAGM VALVE OUTLET. MANHOLE, THERMOWELL. HEIGHT 34", DI...

30 SQ. FT. HOT WATER SET

30 SQ. FT. HOT WATER SET CONSISTING OF ALFA LAVAL LKH-25 CENTRIFUGAL SUPPLY PUMP W/ 3 HP MOTOR, ENERQUIP 30 SQ. FT. HEAT EXCHANGER, ENERQUIP 20 SQ. FT. HEAT EXCHANGER, SINGLE SHELL TANK. OVERALL SKID DIMENSIONS: ...

ADMIX POWDER INDUCTION AND DISPERTION SYSTEM

• Manufacturer: Admix

ADMIX POWDER INDUCTION AND DISPERTION SYSTEM MODEL FF-425. 3.4 CUBIC FT. HOPPER. OVERALL DIMENSIONS: LENGTH - 60", WIDTH - 33", HEIGHT - 37".

TUBE AND SHELL HEAT EXCHANGER

5.7 SQ. FT. TUBE AND SHELL HEAT EXCHANGER. 1" FEMALE NPT CONNECTIONS.

2.93 SQ. FT SHELL AND TUBE HEAT EXCHANGER

• Manufacturer: EXERGY INC.

2.93 SQ. FT SHELL AND TUBE HEAT EXCHANGER. MANUFACTURED BY EXERGY INC. MODEL: 00256-1, SERIAL NO.: 15265. TUBE SIDE FITTING 3/4" NPT FEMALE, SHELL SIDE FITTING 1/2" NPT FEMALE.

500 GALLON PROCESSOR TANK

• Manufacturer: Walker
• Model: PZ-CB

500 GALLON PROCESSOR TANK. MANUFACTURER WALKER MODEL PZ-CB SERIAL 2918. , CYLINDRICAL/CONICAL, DOMED TOP , CONE BOTTOM , JACKET, 304 SS EXTERIOR, 2" TC OUTLET. FULL SWEEPMANHOLE, SPRAYBALL, THERMOWELL. HEIGHT 108...