Used Durco in USA

Trusted Seller
3" x 2" Durco Pump, S/S, 5 HP
- Manufacturer: Durco
3" x 2" Durco Pump, S/S, 5 HP Used 3" x 2" Durco centrifugal pump, stainless steel construction, with 5 hp, 230/460 volt motor, serial# 94977.
Cleveland, OH
Trusted Seller
DURCO
- Manufacturer: Durco
Durco pump. Pump only. No motor. Gpm: 0.0 | Horz/vert: H | Size: 2K3X2-10A/94 | Material: D4
Oldmans Township, NJ
Trusted Seller
57" (1,450 MM) Durco Filter Presses, 360 Cu Ft, Polypropylene
- Manufacturer: Durco
57" (1,450 MM) Durco Filter Presses, 360 Cu Ft, Polypropylene Two (2) used 1450 MM (57") Durco Filter Presses, Model QPF-1450/76-98, polypropylene, plate and frame, 2928 sq. ft. effective filter area, 360 cu. ft....
Cleveland, OH
Trusted Seller
DURCO
- Manufacturer: Durco
(10) Cartridge Filters mounted on one skid/frame. Stainless Steel, Filter is 4" dia x 4' T/T, 3" inlet, 6" outlet, 100 PSI
Oldmans Township, NJ
Trusted Seller
DURCO 3196
- Manufacturer: Durco
- Model: 3196
Durco Stainless Steel pump 3x1.5x10. Mechanical seal. Driven by 7.5 HP, 575 V, WEG Motor.
Oldmans Township, NJ
Trusted Seller
DURCO L
- Manufacturer: Durco
Rebuilt. Durco Model L TEFLON lined pump. Type HS/RA. Size 1J3 x 1.5L-64/64. No drive, no base.
Oldmans Township, NJ
Trusted Seller
DURCO SLEEVELINE 1" PLUG VALVE
- Manufacturer: Durco
ITEM #: 11242 DURCO SLEEVELINE 1" PLUG VALVE ANSI 300 CLASS, NON-LUBRICATED, FIGURE G431 PLUG VALVE FOR CORROSIVE AND CHEMICAL SERVICES. STAINLESS STEEL BODY, PLUG, AND CAP. PTFE SLEEVE. RATED FOR 720 PSI @ 100...
$1,031 USD
Millwood, WV
Trusted Seller
DURCO MARK II
- Manufacturer: Durco
- Model: MARK II
Durco Mark2 pump. No base or drive. MWP = 275 @ 100 deg.F. Mechanical seal type R.O.
Oldmans Township, NJ
Trusted Seller
DURCO SLEEVELINE 1" PLUG VALVE
- Manufacturer: Durco
ANSI 300 CLASS, NON-LUBRICATED, FIGURE G431 PLUG VALVE FOR CORROSIVE AND CHEMICAL SERVICES. STAINLESS STEEL BODY, PLUG, AND CAP. PTFE SLEEVE. RATED FOR 720 PSI @ 100°F, 400 PSI @ 400°F. WORCESTER CONTROLS SPR...
$1,000 USD
Millwood, WV
Trusted Seller
DURCO MARK II
- Manufacturer: Durco
- Model: MARK II
Durco Mark II, 2X1.5US10A/6, 316 Stainless Steel. Recessed Impeller. Powered by 10 HP, 460 V, 3510 RPM, 215T frame Siemens motor. Base 52, Crane seal.
Oldmans Township, NJ
Trusted Seller
3" x 2" x 10" Durco Centrifugal Pump, DS Alloy, 10 HP
- Manufacturer: Durco
3" x 2" x 10" Durco Centrifugal Pump, DS Alloy, 10 HP Used Durco Centrifugal Pump, 3" x 2" x 10" impeller, DS alloy, rated 285 PSI @ 100 degrees F, 10 HP 460 volt XP motor, on base, serial #445115.
Cleveland, OH
Trusted Seller
DURCO MARK II
- Manufacturer: Durco
- Model: MARK II
Durco Mark 3 pump. Rated 275 PSI @ 100 degF. Mechanical seal (EX9KFVROC).
Oldmans Township, NJ
Trusted Seller
DURCO MARK II
- Manufacturer: Durco
- Model: MARK II
Durco Model 2K3x2x13/130. 316 Stainless Steel. Rated 300 GPM @ 165'. No drive. Bare pump
Oldmans Township, NJ
Trusted Seller
1.5" x 1" x 6" Durco Centrifugal Pump, D4 Alloy, 5 HP
- Manufacturer: Durco
1.5" x 1" x 6" Durco Centrifugal Pump, D4 Alloy, 5 HP Used Durco Centrifugal Pump, D4 alloy construction, 1.5" X 1" X 6" impeller, rated 275 PSI @ 100 degrees F, on base with 5 HP 230/460 Volt XP motor.
Cleveland, OH
Trusted Seller
3" x 1.5" x 6" Durco Centrifugal Pump, D4 Alloy, 15 HP
- Manufacturer: Durco
3" x 1.5" x 6" Durco Centrifugal Pump, D4 Alloy, 15 HP Used Durco Centrifugal Pump, D4 alloy construction, 3" X 1.5" X 6" impeller, rated 275 PSI @ 100 degrees F, on base with 15 HP 230/460 Volt XP motor, Serial ...
Cleveland, OH
Durco 3196 Centrifugal Pump
- Manufacturer: Durco
- Model: 3196
Good condition Durco 3196 Centrifugal Pumps. Located in USA and other countries. Click request price for more information.
USA