Used Extruders

ZUMBACH KW20

• Manufacturer: Zumbach
• Model: KW20

Used Zumbach model KW20 surface fault detector.

ZUMBACH KW20

• Manufacturer: Zumbach
• Model: KW20

Used Zumbach model KW20 surface fault detector.

ZUMBACH KW20

• Manufacturer: Zumbach
• Model: KW20

Used Zumbach model KW20 surface fault detector.

ZUMBACH KW20

• Manufacturer: Zumbach
• Model: KW20

Used Zumbach model KW20 surface fault detector.

DAVIS STANDARD 2.5"

• Manufacturer: Davis-Standard
• Model: 25

Used 2.5" Davis Standard extrusion screw.

DUAL HEAD AIR KNIFE 14" Wide

• Manufacturer: DUAL HEAD AIR KNIFE

Used dual head air knife, each approximately 14" wide. Powered by a single 10 HP Spencer Turbine Company 700 CFM blower.

GALA 140GPMTWS

• Manufacturer: GALA

Used Gala round reservoir tank Model 140GPMTWS. Serial #20000200905.

GALA 403VDW

• Manufacturer: GALA

Used 50,000 lb. Gala Model 403VDW Stainless Steel Spin Dryer 43" diameter circular housing Includes 20 hp Baldor motor

GALA 16.2VDW

• Manufacturer: GALA

Used Gala Spin Dryer. Model 16.2VDW, serial #810629-2. Includes blower for additional air flow.

GALA 52BF/S

• Manufacturer: GALA

Used Gala Model 52BF/S, Spin Dryer With Water Tempering System Spin dryer is equipped with auxillary blower for aid in drying, agglomerate catcher, 5 hp motor. Serial #800414

GALA 52BF/S

• Manufacturer: GALA

Used Gala Model 52BF/S, Serial #800708-2, Spin Dryer With Water Tempering System Spin dryer is equipped with 3 hp AC motor, auxillary blower to assist in drying, and agglomerate catcher. Water tempering system in...

24" x 12"

Used 24" Wide 3-Roll Down-Stack Cooling Roll Stack (3) 12" diameter rolls Approximately 5' cooling conveyor Rbber to metal pull roll assembly Chill rolls driven by a 5HP DC motor without drive Pull rolls are driv...

RANDCASTLE Ø51 мм × 203 мм

• Manufacturer: RANDCASTLE

Used 2" O.D. x 8" Wide Randcastle Sheet Extrusion 3-Roll Stack including Pull Roll Station and Single Position Winder.

2003 WERNER & PFLEIDERER ZSK20

• Manufacturer: WP
• Model: ZSK20

Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extrude...

Motan 100

• Manufacturer: Motan

Used 300 lb. Motan model 100 desiccant dryer. No hopper included. Serial #9003860. 6 kW total heater load, 80-100 psi air, 2.3 HP. 240 volt AC input.