Used Extruders

3.5″ TWO STAGE EXTRUDER SCREW 12027

3.5″ chrome plated two stage extruder screw with two rows of mixing pins. Unknown manufacturer.

WELEX 4.5" EXTRUDER SCREW 12343

• Manufacturer: Welex

Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 1803592, 36:1 L/D.

WELEX 4.5″ EXTRUDER SCREW 12730

Welex 4.5″ extruder screw, no S/N, single stage, double spiral, chrome plated, 24:1 L/D. 150″ long.

BRABENDER 3/4″ LAB EXTRUDER 18623

• Manufacturer: Brabender

Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...

DAVIS STANDARD 2.5″ EXTRUDER BARREL 7778

• Manufacturer: Davis-Standard

Davis Standard 2.5″ extruder barrel screw. 24:1 L/D.Three are available.

CINCINNATI EXTRUSION 45MM EXTRUDER 18639

• Manufacturer: Cincinnati

Used Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. S/N U2203. 28:1 L/D five (5) zone electrically heated, air cooled, and non-vented barrel at a 42″ centerline height. Hersteller Wat...

DAVIS STANDARD SINGLE STAGE EXTRUDER 12020

• Manufacturer: Davis-Standard

4.5″ Davis Standard single stage extruder screw. Approximately 28:1 L/D with mixing pins at screw end.

3.5″ TWO STAGE EXTRUDER SCREW 12026

3.5″ two stage chrome plated extruder screw, approximately 24:1 L/D, dual mixing section and dual key shaft.

3.5″ TWO STAGE EXTRUDER SCREW 12025

Two stage 3.5″ chrome plated extruder screw, approximately 24:1 L/D, dual mixing section and dual key shaft, unknown manufacturer.

DELTAPLAST 5 HP PEDESTAL EXTRUDER 18675

One (1) used 30mm Deltaplast model DVH 30.125:24 pedestal extruder. S/N WO281:1.91. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, and non-vented barrel. Radicon (David Brown)...

BATTENFELD CM55 TWIN SCREW EXTRUDER 18510

• Manufacturer: Battenfeld

Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...

LEISTRITZ 27MM TWIN SCREW EXTRUDER 18970

• Manufacturer: Leistritz

Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05″ (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8 barrel housing section electrically heated, water cooled. (1) Degassing port. Maximum scre...

CINCINNATI 112mm TWIN SCREW EXTRUDER 18512

• Manufacturer: Cincinnati

Used Cincinnati model Argos 112P-65-20-1150-UL 112mm parallel counter rotating twin screw plastic extruder. S/N 2041843/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ratio of 27:1. Barre...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19063

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N 2058. Shop Order Number 51306. Unit is mounted on a tripod with ca...

LEISTRITZ 27MM TWIN SCREW EXTRUDER 18970

• Manufacturer: Leistritz

Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05″ (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8 barrel housing section electrically heated, water cooled. (1) Degassing port. Maximum scre...

Jwell PC/PMMA Extruder

• Manufacturer: Jwell
• Model: PC/PMMA

Good condition Jwell PC/PMMA Extruders. Located in China and other countries. Click request price for more information.