Used Dunkes Machine Tools

DUNKES HR25 - Presse

• Manufacturer: Dunkes

Dunkes HZT 6,3 ton

• Manufacturer: Dunkes

Ideal press for broaching Capacity: 6,3 ton | Depth of throat -- ramcentre: 180 mm | Max ram adjustement: 200 mm | Distance between table - ram: 345 mm | Table area: 470 x 340 mm | Dim. table hole: dia 65 mm | El...

DUNKES DG 05

• Manufacturer: Dunkes

Pressure: 1000 (12 Atü) kg | Length: 400 mm | Width: 150 mm | Max. distance from table to slide: 110 mm | Depth of throat: 65 mm | Machine's weight about: 20 kg | Height: 600 mm

1976 DUNKES HDS 16

• Manufacturer: Dunkes

Additional information Well-maintained high-speed hydraulic press Accessories Complete electrical and hydraulic equipment, two-hand electrical engagement, high-voltage safety circuit, SICK light barrier, electric...

1980 DUNKES HR 100

• Manufacturer: Dunkes
• Model: HR 100

Addition Well-maintained hydraulic straightening press with steel construction

DUNKES HR16

• Manufacturer: Dunkes

Straightening press / shaft straightening press 16to

1988 DUNKES HZT 6.3

• Manufacturer: Dunkes
• Model: HZT 63

pressure 6,3 t throat 200 mm stroke 200 mm dayligth 600 mm total power requirement 2,2 kW weight of the machine ca. 0,78 t dimensions of the machine ca. - m Hydraulic Press 63 kN Stroke 200 mm, Throat 200 mm, f...

1987 DUNKES HDS 63

• Manufacturer: Dunkes
• Model: HDS 63

Hydraulic double stands - CNC pulling press · DUNKES - CNC control type CNC 1000 for controlling the press with direct input of all press and process data including corresponding tool data · Controlled pulling ...

1993 DUNKES HD 10

• Manufacturer: Dunkes
• Model: HD 10

CNC double-column press · DUNKES-CNC -Controller Type CNC 200 programmable with pre-set parameters such as stepless pressing force, stroke or depth limit, press speeds Lead/return, automatic display of Z- and Y-...

1982 DUNKES HZT 2,5 1113-23050

• Manufacturer: Dunkes
• Model: HZT 25

Control type: conventional | Freight basis: FCA | Pressure: 2,5 t | Discharge: mm | Hub: mm | Total power requirement: kW | Machine weight approx.: t | Space requirement approx.: m

1996 DUNKES HZ 6,3 1113-24017

• Manufacturer: Dunkes
• Model: HZ 63

C-Type 1 Station Control type: conventional | Freight basis: FCA | Pressure: 6,3 t | Discharge: 170/180 mm | Hub: 310 mm | Drive power: 3 kW | Installation height: 775 mm | Machine weight approx.: 1,5 t | Worktab...

1989 DUNKES HZS 250

• Manufacturer: Dunkes
• Model: HZS 250
• Stroke length: 300 mm
• Daylight: 500 mm

Hydraulic C-Frame presses Press capacity: 250 ton | Throat depth: 430 mm | Stroke: 300 mm | Daylight: 500 mm | Table surface area: 1.100 x 850 mm | Slide area: 1.100 x 850 | Table height over floor: 950 mm | Appr...

1990 DUNKES HZS 25 CNC

• Manufacturer: Dunkes

Hydraulic CNC-controlled single-acting press, 25 to, DARKES C 100 · DUNKES Programm Control Type CNC 100 with data entry field for pressure setting, pressure/time switching, stroke top/bottom, gear speeds...

1987 DUNKES HDS 125

• Manufacturer: Dunkes
• Model: HDS 125

Doppelst.Ziehpresse, CNC gesteuert · DUNKES – CNC-Steuerung Type CNC 1000 zur Steuerung der Presse mit direkter Eingabe aller Pressen- und Prozeßdaten auch für entsprechende Werkzeugdaten · Angest...

1992 DUNKES HZS 75

• Manufacturer: Dunkes
• Model: HZS 75

C-form press with cutting stroke damping, hydraulic ejector in the ram · DARKNESS type PC 10 control program with data entry field for pressure setting, pressure/time switch, stroke up/down, fast feed and workin...