Used threading

4283

Landis Threading Chaser Holders, #B3410, 7/16 to 5/8 UNC

4291

• Manufacturer: Landis
• Model: 4291

Landis Threading Chaser Holders, # B3411, 11/16 to 7/8 UNF

4284

Landis Threading Chaser Holders, #BA15566, 3/16 to 3/8 UNC

4297

• Manufacturer: Landis

Landis Threading Chaser Holders, # B3535, 7/16 to 5/8 UNC Left Hand

4288

• Manufacturer: Landis

Landis Threading Chaser Holders, # Unknown, 3/16 to 3/8 NC

4298

• Manufacturer: Landis

Landis Threading Chaser Holders, # CA3549, 3/16 to 3/8 UNC Left Hand, 3 pieces without screws and clamps

1997 KYOEI SR-15

• Manufacturer: KYOEI

Production: 400 PPM | Maximum depth of die face: 2.125" - 2.362" | Thickness of dies: .811" (20.6mm) | Length of moving die: 4" (101.6mm) | Length of stationary die: 3.5" (88.9mm) | Motor: 5 HP | Approx. floor s...

4286

• Manufacturer: Landis
• Model: 4286

Landis Threading Chaser Holders, # unknown, 5/8 - 18 PT, pipe thread

4290

Landis Threading Chaser Holders, # BA15058, 3/16 to 3/8 UNC

4285

Landis Threading Chaser Holders, # unknown, 3/16 to 3/8 UNF, screw broken off in 1 piece

1990 WARREN INDUSTRIES WT-1500

• Manufacturer: Warren
• Model: WT-1500

Die requirement: "0" or "1015" | Screw diameter capacity: #2 thru #12 (1/4") | Speed range: 90 to 700 PPM | Maximum blank length: Up to 3" | Die pocket depth: 3" | Approx. weight: 4,500 lbs | Approx. floor size:...

1980 KINEFAC MC-5-F

• Manufacturer: KINEFAC

Maximum infeed diameter: 2" | Spindle diameter: 2" | Maximum diameter thru feed: 1-1/2" | Die length: 4" | Electrics: AC Motor and Controls | Approx. weight: 3,000 lbs | Equipped with: Hydraulic Pump and TankCoo...

1986 TESKER 30

• Manufacturer: TESKER

Capacity: 5/8" Maximum Diameter | Rolling pressure adjustable to: Fixed | Motors spindle drive: 15 HP | Hydraulic coolant: 1/4 HP | Maximum diameter (dies): 4-7/8" | Maximum die face width: 3" | Standard spindle...

1990 TESKER 30

• Manufacturer: TESKER

Capacity: 5/8" Maximum Diameter | Rolling pressure adjustable to: Fixed | Motors spindle drive: 15 HP | Hydraulic coolant: 1/4 HP | Maximum diameter (dies): 4-7/8" | Maximum die face width: 3" | Standard spindle...